Design and analysis of spiral bevel gears with seventh-order function of transmission error

This paper proposes a new approach to mial function of transmission error （TE） for spiral design and implement a seventh-order polyno- bevel gears with an aim to reduce the running vibration and noise of gear drive and improve the loaded distribution of the tooth. Based on the constraint conditions of predesigned seventh-order polynomial function curve and the theory of linear algebra, the polynomial coefficients of the seventh-order polynomial function of transmission error can be obtained. By applying a method named reverse tooth contact analysis, the modified roll coefficients as well as parts of machine-tool settings for the face-milling of spiral bevel gears can be individually determined. Therefore, a predesigned seventh-order polynomial function of transmission error for spiral bevel gears can be obtained by the modified roll with high-order coef- ficients, and comparisons of the seventh-order polynomial and parabolic functions of transmission error are also performed. The achievement of spiral bevel gears with the seventh-order function of transmission error can be accomplished on a universal Cartesian-type hypoid gear generator or a numerically controlled cradle-style hypoid gear generator due to its simple generating motion of axes of the cradle and the work piece. The results of a numerical example show that the bending stresses of the tooth of seventh-order are less than those of a parabolic one, while the contact stresses remain almost eouivalent.     

水性涂料用丙烯酸树脂的研究

水性涂料用的丙烯酸树脂主要是丙烯酸、甲基丙烯酸及其酯与乙烯系单体如苯乙烯经共聚生成的树脂。本文对其合成影响因素等进行了介绍。     

磺化Resol-Novalak共聚酚醛树脂热解特征的TG-MS研究

合成了一种合磺酸基的热固性Resol—Novalak共聚酚醛树脂(C——PF／SPF)。TG—MS(热失重—质谱)的研究结果表明，C—PF／SPF在低于350℃时，主要发生与磺酸基相关的热分解井退出SO2等产物；在450℃—820℃范围，只观察到CO2(m／z＝44)、C0(m／z＝28)和H20(m／z＝18)等产物及其碎片；在110℃—820℃的测试温度范围未检测到与主链断裂有关的酚类热解产物，显示出优越的热稳定性；这是由于部分磺酸基中的硫在热处理过程中与酚醛树脂的芳环发生交联，从而大大增加了C——PF／SPF的热稳定性。基于TG—MS结果的理论计算表明，C——PF／SPF经350℃热处理后的理论残碳率可达80％，是一种具有应用前景的C／C复合材料用基体前驱体。     

无机纳米粒子/环氧树脂基复合材料的研究现状

系统地综述了近年来纳米改性环氧树脂基复合材料的研究现状。介绍了环氧树脂基纳米复合材料的制备方法和无机纳米粒子的表面修饰方法，分析了环氧树脂基纳米复合材料的形成机理和固化反应动力学，概括了此类复合材料的性能特点并展望了环氧树脂基纳米复合材料未来的发展和应用前景。     

新型高残碳酚醛树脂的性能研究

采用热重和高效液相色谱法对高残碳酚醛树脂的性能进行分析。结果表明，与其它酚醛树脂相比，此树脂具有较高的热分解温度和表观活化能，700℃残碳率大于75％，热性能和耐烧蚀性能优于传统烧蚀酚醛树脂，是良好的耐热、耐烧蚀基体材料；用高效液相色谱(HPLC)初步探讨了树脂的反应机理，得出大分子量组成含量随聚合度变化，应作为树脂质量控制的指标之一。     

湿法缠绕用环氧树脂固化反应研究

用简单的ｎ级动力学反应模型模拟高性能湿法成型用的环氧树脂配方的固化反应，利用ＤＳＣ技术检测了其整个固化反应的实际状态，比较了相应的理论预测与实验结果。     

双基推进剂组分的物化参数对燃速温度系数的影响——碳单元理论物理模型Ⅲ

对双基和改性双基推进剂组分由初温(T_o)开高到分解温度(T_d)所经历的物理化学变化过程,进行了假设及分析,得出组分的熔点及粘度是影响燃速温度系数的决定因素的结论。同时提出了在平台区降低燃速温度系数的可行途径。     

几种特定判定形式的MC／DC评估分析

介绍了对几种特殊形式的判定进行修正的条件／判定覆盖评估分析的方法。这些形式包括比较运算判定、带短路逻辑的判定、顺序if结构、位运算判定、带反馈判定和带屏蔽判定。     

纤维预制体(织物)中反应性流体的流动行为

文摘反应性流体在纤维预制体(织物)中的流动行为对于优化工艺参数和模具设计、控制制品质量等具有重要意义。本文简述了RTM工艺的流体流动特点,介绍了RTM工艺过程中流体流动研究的理论基础,综述了RTM工艺中反应性流体流动的发展现状,并展望了其发展趋势。     

Deramp range migration processing for space-borne spotlight synthetic aperture radar

The deramp range migration algorithm (DRMA) for space-borne spotlight synthetic aperture radar (SAR) is presented, which is based on the two-step algorithm and range migration algorithm. The presented algorithm combines the advantages of SPECAN algorithm and range migration algorithm. Firstly, the presented algorithm performs a bulk azimuth raw data compression to achieve a pixel spacing no larger than the expected azimuth resolution of the fully focused image. Therefore, the azimuth spectral folding phenomenon is overcome. Secondly, the residual and precise focusing of the synthetic aperture radar data is achieved by applying the range migration algorithm. The space-borne SAR focusing parameters’ computation is also described in the paper. At the end of this paper, results are presented which confirm the validity of the presented algorithm.