面向对象技术的防空导弹Simulink建模与仿真

为防空导弹系统性能改进研究和优化设计,提出了一种新的方法,首先给出了一般防空导弹制导控制系统的数学模型,并采用面向对象建模技术结合动态仿真软件Simulink建立了仿真模型并进行了仿真研究,该模型具有容易理解,可重复使用,易于扩展等优点,即通过部分模块更换或改变参数等就可对该系统在其他条件下进行仿真,仿真结果和实际遥测数据基本吻合,表明了该模型和方法的有效性和实用性。     

惯组中光纤陀螺温度漂移的二维插值建模研究

光纤陀螺对温度较为敏感,输出受温度及温度变化率影响严重,在实际工作中需要对温度漂移误差进行建模补偿。传统多项式拟合方法如最小二乘法,无法很好地满足精度要求。因此,首先对光纤陀螺工作原理与温度漂移误差产生原理进行分析,得出光纤陀螺温度漂移误差特性。利用传统多项式模型对不同温度下启动的光纤陀螺进行建模补偿,得到补偿后的精度并不理想。利用新的二维插值模型对上述试验重新进行建模补偿,结果表明二维插值模型明显优于多项式模型,光纤陀螺的零偏稳定性由补偿前的0.0153(°)/h提高到0.0051(°)/h,有利于工程上应用。     

An adaptive turbo-shaft engine modeling method based on PS and MRR-LSSVR algorithms

In order to establish an adaptive turbo-shaft engine model with high accuracy, a new modeling method based on parameter selection (PS) algorithm and multi-input multi-output recursive reduced least square support vector regression (MRR-LSSVR) machine is proposed. Firstly, the PS algorithm is designed to choose the most reasonable inputs of the adaptive module. During this process, a wrapper criterion based on least square support vector regression (LSSVR) machine is adopted, which can not only reduce computational complexity but also enhance generalization performance. Secondly, with the input variables determined by the PS algorithm, a mapping model of engine parameter estimation is trained off-line using MRR-LSSVR, which has a satisfying accuracy within 5&. Finally, based on a numerical simulation platform of an integrated helicopter/ turbo-shaft engine system, an adaptive turbo-shaft engine model is developed and tested in a certain flight envelope. Under the condition of single or multiple engine components being degraded, many simulation experiments are carried out, and the simulation results show the effectiveness and validity of the proposed adaptive modeling method.     

大功率舰船燃气轮机压气机增容模化设计研究

某重点项目的船用燃气轮机领域提出了更高等级功率燃气轮机的要求。为了在研制周期内快速设计一型压气机,以现有机型为母型机进行模化设计,在母型机特性图上合理选择模化点,确定模化比,得到增容后模化机的叶片和几何通流结构,划分网格时,充分考虑叶顶间隙、倒角、引气孔、梳齿密封等,以更接近于工程实际情况,对模化机进行全三维数值模拟计算,结果表明,模化机设计点性能指标达到要求,非设计工况喘振裕度基本与母型机相同,模化后叶顶相对间隙的降低会带来阻塞点流量的升高、失速点流量的降低,导致低转速下喘振裕度的升高和高转速下喘振裕度的降低。总体来说,模化增容设计继承了母型机优良的气动性能,为快速、高效研发新机型提供宝贵经验。     

Identification method for helicopter flight dynamics modeling with rotor degrees of freedom

A comprehensive method based on system identification theory for helicopter flight dynamics modeling with rotor degrees of freedom is developed. A fully parameterized rotor flapping equation for identification purpose is derived without using any theoretical model, so the confidence of the identified model is increased, and then the 6 degrees of freedom rigid body model is extended to 9 degrees of freedom high-order model. Bode sensitivity function is derived to increase the accuracy of frequency spectra calculation which influences the accuracy of model parameter identification. Then a frequency domain identification algorithm is established. Acceleration technique is developed furthermore to increase calculation efficiency, and the total identification time is reduced by more than 50% using this technique. A comprehensive two-step method is established for helicopter high-order flight dynamics model identification which increases the numerical stability of model identification compared with single step algorithm. Application of the developed method to identify the flight dynamics model of BO 105 helicopter based on flight test data is implemented. A comparative study between the high-order model and rigid body model is performed at last. The results show that the developed method can be used for helicopter high-order flight dynamics model identification with high accuracy as well as efficiency, and the advantage of identified high-order model is very obvious compared with low-order model.     

超宽带无线电引信接收机时域建模与仿真

为得到弹目交会过程中超宽带无线电引信接收机的时域输出信号,实现高速交会条件下引信接收机的性能优化,推导了取样积分微分电路的时域数学模型,提出了一种基于无载波信号时域多普勒效应的接收机输出信号时域仿真方法.弹目接近速度对接收机输出信号的影响研究表明,输出信号频率与弹目接近速度成正比;信号幅度与弹目接近速度关系曲线存在速度驻点.选择合理的积分、微分电容可设置恰当的速度驻点,提高引信的抗干扰性能.     

基于雷达对抗试验等效推算的密集压制干扰研究方法

面向雷达干扰研究的现实需求及作战目标雷达难以获取的现实困难,针对密集假目标压制干扰这一典型干扰样式,研究了密集假目标压制干扰效果替代等效推算的基本原理,建立了数学推算模型和仿真模型,构建了作战目标雷达的仿真系统,并基于试验数据表明了推算模型和仿真模型的正确性,为研究密集假目标压制干扰对作战目标雷达的干扰效果提供了高效、可靠的分析工具。     

A spanwise loss model for axial compressor stator based on machine learning

In the early stage of aircraft engine design, the through-flow method is an important tool for designers. The accuracy of the through-flow method depends heavily on the accuracy of the loss model. However, most existing models cannot(or cannot well) provide the spanwise loss distribution. To construct an effective spanwise loss model, both turbomachinery knowledge and machine learning skills were used in this paper. A large number of numerical simulations were carried out to build a database con...     

基于机械抖动激光陀螺仪的动态误差分析

机抖激光陀螺仪是目前应用最为广泛的激光陀螺,是实现应用捷联惯导系统进行导航的理想惯性仪表,研究激光陀螺仪的误差因素,并通过软件进行补偿提高其精度,对提高捷联惯导系统的精度具有重要意义。相对于研究已经较为成熟的静态误差,对动态误差的研究仍较少。针对激光陀螺的动态误差,通过分析在动态环境中抖动机构的输出对二频机抖激光陀螺输出的影响,建立了动态误差模型,为激光陀螺动态误差的研究提供了理论储备,具有一定的工程应用价值。     

Numerical modeling of inhomogeneous orographic wave influence on planetary waves in the middle atmosphere

Parameterization of dynamical and thermal effects of stationary orographic gravity waves (OGWs) generated by the Earth’s surface topography is incorporated into a numerical model of general circulation of the middle and upper atmosphere. Responses of atmospheric general circulation and characteristics of planetary waves at altitudes from the troposphere up to the thermosphere to the effects of OGWs propagating from the earth surface are studied. Changes in atmospheric circulation and amplitudes of planetary waves due to variations of OGW generation and propagation in different seasons are considered. It is shown that during solstices the main OGW dynamical and heat effects occur in the middle atmosphere of winter hemispheres, where changes in planetary wave amplitudes due to OGWs may reach up to 50%. During equinoxes OGW effects are distributed more homogeneously between northern and southern hemispheres.