基于灰度级分组的X光行李图像增强改进方法

针对低对比度X光手提行李图像在机场安检中容易产生高虚警或高漏警的问题,提出了一种基于灰度级分组的X光行李图像增强改进方法。首先应用离散小波变换对低、高能图像进行融合,然后通过分频处理得到低、高频图像,再分别采用基本灰度级分组和可选择灰度级分组方法实现增强。将本文方法与基于灰度级分组的增强方法、传统的直方图均衡方法进行比较,实验结果表明,本文方法能够有效地改善图像质量,提高图像的清晰度。     

Pre-storm behaviour of NmF2 and TEC (GPS) over equatorial and low latitude stations in the Indian sector

The pre-storm behavior of NmF₂ and TEC over an equatorial station, Trivandrum (8.47°N, 76.91°E, dip 0.6°S) and a low latitude station, Waltair (17.7°N,83.3°E, dip 20°N) has been studied for a total of 18 strong geomagnetic storms with DST ? −100 nT. The simultaneous measurements of GPS-TEC and NmF₂ over Trivandrum and Waltair during the period 2000–2005 have been considered for the present study. It is found that there is a substantial increase in NmF₂ and TEC before the onset of the storm over Waltair, while the increase is not present at Trivandrum. The origin of pre-storm enhancements in electron density still remains unresolved owing to several conditions in their potential sources and occurrence mechanisms. In the present study an attempt is made to identify the possible mechanisms responsible for such enhancements in electron density of the F-region.     

电容放电式火工品点火电路参数设计与仿真

文章介绍了火工品电容放电式点火电路,阐述了电容充放电原理和充放电电路的参数计算方法;仿真分析了充电电压和储能电容等参数对点火电路放电性能的影响。通过仿真分析得出,合理选择储能电容和充电电压能够获得较好的点火性能。     

磁悬挂天平导航控制系统的应用与研究

介绍了利用美国国家仪器有限公司(简称NI:National Instruments)的软件LabVIEW和硬件高速定时器/计数器,以及含步进电机的CCD线阵列式位置传感器支架来实现的磁悬挂天平MSBS(Magnetic Suspension and Balance System)导航控制系统,其中主要包括它的俯仰、左右和平动方向的导航控制.磁悬挂天平是进行风洞实验的理想装置,其基本核心技术之一就是进行导航控制.该系统基于LabVIEW7.0平台进行编程,具有操作界面友好直观、导航控制精度高、便于扩展等特点.磁悬挂天平导航控制系统是"30cm×30cm磁悬挂天平装置"及"30cm×30cm低速高品质气流风洞装置"的重要组成部分.     

喷气燃料中微量悬浮物的过滤分离装置的研制

研制了喷气燃料中难分离微量悬浮物的过滤试验装置,通过标准试验手段来判断某喷气燃料中的悬浮物是否能够通过目前外场过滤系统过滤净化处理,减少目前普遍使用的用目视检查方法判断喷气燃料洁净度的误差。研制的标准滤芯满足设计要求。按照标准试验滤芯相似原理即过滤精度、流量和压差三方面相似设计的标准滤芯与小型滤芯和外场大滤芯效果相当,在5~9级范围内AbakusC颗粒计数仪测得的NAS1638污染度可以代替俄罗斯ПКЖ-904A颗粒计数仪测得的ΓOCT17216污染度。使用过滤试验装置有利于对喷气燃料质量管理和贮运过程中的洁净度进行科学评价。     

快速构建基于EZ-USB芯片的数据传输管道

通过深入剖析设备数据传输所面临的诸多问题及特点,给出一系列快速构造USB传输管道应遵循的原则,为设备接入主机提供一个简单、经济且可靠的传输方案。其核心是用标准USB总线接口、连接器及USBHUB实现传输的经济可靠;由功能强大的EZ-USB芯片和工具包简化接口电路及代码设计。     

开关量输出型传感器电气保护装置的研制

本文以三线制ＮＰＮ式开关量输出型传感器为例,介绍了传感器的负载驱动单元的结构特点及驱动方式。针对工程使用中经常出现的故障,研制了相应的电气保护装置。     

Flow field characteristics,mixing and emissions performance of a lab-scale rich-quench-lean trapped-vortex combustor utilizing a quench orifice plate combined with a bluff-body

In this study, the low emission combustion technology of Rich-Quench-Lean (RQL) has been applied in Trapped-Vortex Combustor (TVC), and the combinative RQL-TVC shows a promising low emissions performance. By utilizing a quench orifice plate combined with a bluff-body, a lab-scale RQL-TVC was designed. The flow fields of RQL-TVC were measured by 2-D PIV and predicted by 3-D numerical simulation. Flow structures, radial profiles of normalized mean axial velocity, turbulence intensity and mixing level of the quench zone were analyzed. Results reveal that the dual-vortex and the single-vortex flow patterns both exist in cavities and quench zone of RQL-TVC, and the turbulence intensity is strong in the quench zone with some reverse flows. The spiral vortex was discussed by 3-D streamlines and the detail flow structures of the quench zone were analyzed based on the numerical results. The mixing level of the quench zone was determined, and results show that the quench device enhances the mixing level compared with TVC. Combustion efficiency and emissions performance were investigated experimentally, and results demonstrate that RQL-TVC has relatively higher combustion efficiency and lower emission index of CO, UHC and NO_x than the same size lab-scale TVC in present work.     

氧化镍电致变色薄膜及其器件的制备与性能研究

以氧化铟锡(ITO)玻璃为基底,采用直流反应磁控溅射法在室温环境下制备了高透过率调制的NiO_x薄膜,利用X射线衍射仪(XRD)、扫描电子电镜(SEM)、紫外可见分光光度计(UV 3600)对薄膜进行分析和表征,研究溅射过程中氩氧比、气压、功率对薄膜结构、形貌及电致变色性能的影响。结果表明：制备的NiO_x薄膜表面有明显的结晶颗粒及孔隙,并沿(200)晶面择优生长;随着气压、功率、氧分压的增大,透过率调制先增大后减小,在时间为45 min、溅射气压4.9 Pa、氩氧比113∶7、功率215 W时最高可达58.3%,着褪色响应时间分别为9和19s,相应的着褪色效率分别为77.56和40.39 cm²/C;以最优工艺的NiO_x薄膜组装了结构为Glass/ITO/NiO_x/Li-electrolyte/WO₃/ITO/Glass的电致变色器件,器件在550 nm处的光调制幅度为46.5%,着褪色时间分别为27和45 s,相应的着褪色速率为1.5和0.9%/s,在循环...     

竖直平板自然对流强化换热的实验

研究各种强化换热结构对竖直平板自然对流换热的强化作用.通过比较圆柱扰流、圆锥扰流、三棱柱扰流、三棱锥扰流、四棱柱扰流、四棱锥扰流和直角三角翼纵向涡发生器LVG(Longitudinal vortex gener-ator)等对自然对流换热的强化效果,发现:单种换热结构中直角三角翼纵向涡发生器的强化换热效果最好,组合结构中直角三角翼叉排与圆柱扰流的混合排列换热效果最好,其能将竖直平板自然对流换热效果提高24.%.