对合成孔径雷达的移频干扰研究

从分析脉冲压缩信号时延和频移的耦合特性出发，推导了移频干扰对采用脉冲压缩信号体制的合成孔径雷达（SAR）的干扰输出形式，研究表明移频干扰的移频量与合成孔径雷达方位向处理的多普勒带宽无关，但只能形成点目标或线目标干扰。为此，提出了两种改进的移频干扰新样式——随机移频干扰和步进移频干扰。改进的移频干扰样式能够形成一个干扰区域，克服了固定移频干扰不能掩护分布目标的不足。理论分析和仿真表明，改进的移频干扰样式可掩护分布目标，由于可获得一维和二维信号处理增益，干扰效果优于噪声干扰。     

异面压缩下六边形铝蜂窝平均塑性坍塌应力研究

为了研究铝蜂窝在准静态异面压缩下的平均塑性坍塌应力，基于简化的基本折叠单元理论，以单个完整铝蜂窝六边形单元为研究对象，根据能量守恒定律，形成一个基本折叠单元外力所做的功等于屈曲能和膜能的总和，由此分别假设铝蜂窝材料服从Tresca屈服准则或Mises屈服准则，给出了两个准静态异面压缩下铝蜂窝平均塑性坍塌应力的理论计算公式，试验结果验证了理论推导的正确性。提出的公式对研究铝蜂窝的异面压缩性能具有一定的工程指导意义。     

Assimilation of endmember variability in spectral mixture analysis for urban land cover extraction

Variable Endmember Constrained Least Square (VECLS) technique is proposed to account endmember variability in the linear mixture model by incorporating the variance for each class, the signals of which varies from pixel to pixel due to change in urban land cover (LC) structures. VECLS is first tested with a computer simulated three class endmember considering four bands having small, medium and large variability with three different spatial resolutions. The technique is next validated with real datasets of IKONOS, Landsat ETM+ and MODIS. The results show that correlation between actual and estimated proportion is higher by an average of 0.25 for the artificial datasets compared to a situation where variability is not considered. With IKONOS, Landsat ETM+ and MODIS data, the average correlation increased by 0.15 for 2 and 3 classes and by 0.19 for 4 classes, when compared to single endmember per class.     

弹性杆端性能计算方法及验证

弹性杆端技术是旋翼系统杆端关节轴承技术的一大进步。基于传统弹性元件工程计算方法，结合橡胶计算力学理论，创建了一套弹性杆端关节轴承性能计算方法，并且通过试验结果验证了其可行性。     

Temperature effect on buckling properties of ultra-thin-walled lenticular collapsible composite tube subjected to axial compression

This paper seeks to outline the temperature effect on the buckling properties of ultra-thin-walled lenticular collapsible composite tube(LCCT) subjected to axial compression.The buckling tests of the LCCT specimens subjected to axial compression were carried out on INSTRON-500 N servo-hydraulic machine in dry state and at the temperatures of 25 C, 100 C and 80 C. The load–displacement curves and buckling initiation loads were measured and the buckling initiation mechanism was discussed from experimental observations. Experiments show that the buckling initiation load, on average, is only about 2.2% greater at the low temperature of 80 C than at the room temperature of 25 C due to the material hardening, demonstrating an insignificant increase in the buckling initiation load, whereas it is about 19.5% lower at the high temperature of 100 C than at the room temperature owing to the material softening, implying a significant decrease in the buckling initiation load. The failure mode of the LCCT in axial compression tests at three different temperatures can be reckoned to be characteristic of the buckling initiation and propagation around the central region until rupture. The finite element(FE) model is presented to simulate the buckling initiation mechanism based on the eigenvalue-based methodology. Good correlation between experimental and numerical results is achieved.     

Experimental comparison between aircraft fuel tank inerting processes using NEA and MIG

Fuel tank inerting technologies are able to reduce the fire risk by injection of inert gas into the ullage or fuel, the former called ullage washing and the latter fuel scrubbing. The Green On-Board Inert Gas Generation System (GOBIGGS) is a novel technology based on flameless catalytic combustion, and owning to its simple structure and high inerting efficiency, it has received a lot of attentions. The inert gas in the GOBIGGS is mainly comprised of CO₂, N₂, and O₂ (hereinafter, Mixed Inert Gas (MIG)), while that in the On-Board Inert Gas Generation System (OBIGGS), which is one of the most widely used fuel tank inerting technologies, is Nitrogen-Enriched Air (NEA). The solubility of CO₂ is nearly 20 times higher than that of N₂ in jet fuels, so the inerting capability and performance are definitely disparate if the inert gas is selected as NEA or MIG. An inerting test bench was constructed to compare the inerting capabilities between NEA and MIG. Experimental results reveal that, if ullage washing is adopted, the variations of oxygen concentrations on the ullage and in the fuel are nearly identical no matter the inert gas is NEA or MIG. However, the ullage and dissolved oxygen concentrations of MIG scrubbing are always higher than those of NEA scrubbing.     

轴流压缩系统失速可恢复性的预测

基于描述轴流压气机及其系统的动态气动响应的一维非定常单元容积模型 ,通过数值求解并利用可视化的编程方法 ,模拟了单级、三级和九级压缩系统的失速可恢复性。单级压缩系统的数值模拟结果取得了实验结果的验证 ,九级压缩系统的数值模拟结果与该压缩系统在台架上的实际工作情况符合得很好 ,数值模拟结果揭示出了影响压缩系统失速恢复性的一些因素     

高超侧压式进气道高焓脉冲风洞实验

为验证一种双楔顶压、侧板中置的侧压式进气道基本性能,设计了一套进口面积为110mm×91mm的双流道试验模型,并在300mm马赫数6的高焓脉冲风洞中进行了吹风实验。实验测量了进气道和隔离段内的沿程静压分布和隔离段进出口截面的皮托压力分布,分析了进气道内的典型流场特征,获得了进气道的基本性能参数,并以马赫数的测量为例阐述了流场不均匀性对测量结果可能造成的影响。实验结果表明,马赫数6来流条件下,该侧压式进气道流量系数为0.83,隔离段出口平均马赫数为2.57,总压恢复系数为0.296,增压比为23.7,表明这种侧压式进气道的气动布局方式能够获得较好的总体性能。     

旋转冲压发动机驻涡燃烧技术研究现状分析

旋转冲压发动机是一种全新概念发动机，采用激波增压和驻涡燃烧技术。其显著的高效、低污染特性引起越来越多人关注。本文首先扼要介绍了旋转冲压发动机总体结构，然后介绍了驻涡燃烧技术的概念和研究现状，最后描述了旋转冲压发动机中驻涡燃烧室的结构特点。