航天电子设备可靠性评估方法研究

建立了一种综合利用航天电子设备分系统可靠性信息和试验数据以及整机系统试验数据的Bayes可靠性评估方法.该方法利用最大熵方法融合分系统可靠性信息,推导了从分系统可靠性矩到系统可靠性矩的计算公式,然后建立了基于继承因子ρ的混合β先验分布,结合整机系统试验数据确定后验分布,最后,基于后验分布推断航天电子设备可靠性.采用该方法对航天电子设备可靠性进行了评估,当整机系统试验数据为240次时,航天电子设备在置信水平0.70的情况下可靠度可达到0.9991,所要求的整机系统试验次数比经典方法约降低了4/5.     

Fatigue behavior of direct laser deposited Ti-6.5Al-2Zr-1Mo-1V titanium alloy and its life distribution model

The present work aims to investigate the fatigue behavior of Direct Laser Deposition (DLD) Ti-6.5Al-2Zr-1Mo-1V titanium alloy under constant amplitude stress. 22 pieces of DLD Ti-6.5Al-2Zr-1Mo-1V titanium alloy standard cylinder specimens were tested under a stress level of 800?MPa with a stress ratio of 0.06. Fatigue fractography and fatigue life data were obtained. Through the fracture surface analysis, the specimens were divided into two categories in accordance with the location of crack initiation and defect types. Comparison of fatigue life and behavior between two specimen types was given, which was followed by a discussion about the impact of defect type, size and position on the fatigue life of the specimen. The fatigue test results also show a large variation of fatigue life. To illustrate the statistical characteristics of the fatigue life, probabilistic analysis was performed, and a novel bimodal lognormal model was established. The model has a good fit with the experimental data and can reduce the scatter of the fatigue life significantly.     

Evaluation of mixed mode-I/II criteria for fatigue crack propagation using experiments and modeling

In this study, in-plane mixed mode-I/II fatigue crack growth simulations and experiments are performed for the Al 7075-T651 aluminum alloy which is widely used in the aerospace industry. Tests are carried out under different mode mixity ratios to evaluate the applicability of a fracture criterion developed in a previous study to mixed mode-I/II fatigue crack growth tests. Results obtained from the analyses and experiments are compared with existing and developed criteria in terms of crack growth lives. Compact Tension Shear (CTS) specimens, which enable mixed mode loading with loading devices under different loading angles, are used in the simulations and experiments. In an effort to model and simulate the actual conditions in the experiments, crack surfaces of fractured specimens are scanned, crack paths are modeled exactly, and contacts are defined between the contact surfaces of a specimen and the loading device for each crack propagation step in the analyses. Having computed the mixed mode stress intensity factors from the numerical analyses, propagation life cycles are predicted by existing and the developed mixed mode-I/II criteria and then compared with experimental results.     

Multiframe weak target track-before-detect based on pseudo-spectrum in mixed coordinates

Traditional multiframe Track-Before-Detect(TBD) may incur adverse integration loss resulting from model mismatch in sensor coordinates. Its suboptimal integration strategy may cause target envelope degradation. To address these issues, a pseudo-spectrum-based multiframe TBD in mixed coordinates is proposed firstly. The data search for energy integration is conducted based on an accurate model in the x-y plane while target energy is integrated based on pseudo-spectrum in sensor coordinates. The a...     

Investigations of entrainment characteristics and shear-layer vortices evolution in an axisymmetric rear variable area bypass injector

In this study,firstly,for the axisymmetric RVABI,the change-rule of adverse pressure gradient caused by radial velocity during the transition of internal flow mode in variable geometry is summarized,and a Bypass Ratio(BR) iterative algorithm based on the empirical correlation of non-equilibrium pressure is proposed.The algorithm can estimate the nonlinear relationship between area ratio and BR,with an error range falling below 6.5%.Then,we discuss the favorable effect of uniform mixing on the th...