天线罩外形形线对天线罩性能的影响

比较和分析了不同天线平外形形线在不同长细比情况下对天线罩的电气性能和气动特性的影响。分析认为，在设计天线罩时，应根据导弹和天线罩的综合性能要求进行综合处理。     

引战系统数学仿真中战斗部仿真的初步实现

研究了某导弹引战系统数学仿真中破片式战斗部仿真的实现。根据目标易损性,用蒙特卡罗法计算了战斗部对空中目标的杀伤作用,给出了炸点定位、破片飞行动力学系数、易损舱覆盖面积、杀伤区参数、破片对易损舱作用和易损舱杀伤概率的计算模型,并由此获得了目标杀伤概率和导弹单发杀伤概率。介绍了设计的引战系统数学仿真模型。该模型的作用和有效性在该导弹的闭合回路靶试中获得了验证。     

Cooperative guidance of seeker-less missile considering localization error

To perform an accurate fire-and-forget attack of seeker-less missile with the consideration of the localization error, a new cooperative guidance strategy of multi-missiles is proposed in this work. Firstly, an estimated position of the seeker-less missile is carefully selected, based on which the slant angle of the line between the estimated and real positions of the seeker-less missile is approximately derived inspired by the localization theory of GPS(Global Position System).Then, respectively based on the guidance law considering the impact angle and time constraints, the consensus theory and the finite-time convergence approach, three cooperative guidance laws employing the previously obtained slant angle are derived for intensive attack to address either a stationary or maneuvering target. Simulation results well demonstrate the effectiveness and advantages of the proposed cooperative guidance strategy.     

Three-dimensional guidance law based on adaptive integral sliding mode control

For the terminal guidance problem of missiles intercepting maneuvering targets in the three-dimensional space, the design of guidance laws for non-decoupling three-dimensional engage-ment geometry is studied. Firstly, by introducing a finite time integral sliding mode manifold, a novel guidance law based on the integral sliding mode control is presented with the target acceler-ation as a known bounded external disturbance. Then, an improved adaptive guidance law based on the integral sliding mode control without the information of the upper bound on the target accel-eration is developed, where the upper bound of the target acceleration is estimated online by a designed adaptive law. The both presented guidance laws can make sure that the elevation angular rate of the line-of-sight and the azimuth angular rate of the line-of-sight converge to zero in finite time. In the end, the results of the guidance performance for the proposed guidance laws are pre-sented by numerical simulations. Although the designed guidance laws are developed for the con-stant speed missiles, the simulation results for the time-varying speed missiles are also shown to further confirm the designed guidance laws.     

光电经纬仪室内检测系统的研究与应用

为解决靶场光电经纬仪的精度检测问题,进行可行性分析和系统研究,研制开发室内检测系统。系统针对靶场不同型号的光电经纬仪提出合理的检测方法,建立动态精度靶标为检测基础的数学模型,用Visual Basic实现数据转换、计算和检测信息管理,并通过某型号光电经纬仪实际检测、验证系统的正确性。该检测系统增强了检测的可靠性,极大地提高检测效率。     

弹-架间隙的非线性模拟与特性分析

以大长径比低速旋转火箭为例,探讨弹-架间隙非线性特性对不同发射装置系统的动力响应的影响,当飞行器以S个定心部沿发射装置滑移时,根据弹、架横向相对位移确定其定心部处接触刚度和支承特性,模拟弹-架间隙效应。分别就刚性和柔性两种发射装置,分析了间隙量、支承刚度和转速等因素对飞行器发射中的姿态和系统动力特性的影响,算例与实际情况的相吻合证明了该方法的有效性。     

高职物流教育存在的问题及解决对策

通过分析我国高职物流教育的现状及存在的培养目标定位模糊、师资缺乏、教材质量差、教学手段和方法单一等问题。提出了明确培养目标、加强师资队伍和教材建设、改革教学方法等对策。阐述了只有更新观念，不断创新，高职院校才能为我国物流行业培育出更多高素质的适用人才。     

基于局部单应性矩阵的图像拼接与定位算法研究

针对单个摄像机的视野范围有限导致在大场景下监控效果不够理想的问题,提出了一种改进的图像拼接与目标定位算法。该算法以多个摄像机获取的具有共视区域的监控图像为基础,通过对图像进行网格划分后分别计算多个局部单应性矩阵完成初步对准,然后对网格顶点进行微调优化完成最后配准。最后对图像进行融合形成无缝、自然的大视角图像,并利用场景信息在获取的全景图像上对目标进行快速定位,以满足监控人员对场景中目标的全景捕捉分析功能。实验结果表明,该算法能显著提高大场景下图像拼接结果的质量并实现目标的快速定位。     

基于变质心控制导弹的运动分析

导弹变质心机动控制通过改变弹头的质心,利用气动配平力矩改变弹头飞行姿态和攻角,从而实现导弹机动控制.本文首次详细推导了基于变质心控制导弹的空间六自由度的动力学方程,并建立了一套完整的仿真系统,针对导弹在垂直平面内运动情况进行仿真,为深入探讨变质心控制弹头的控制机理奠定基础.     

试验室实现寻的制导半实物仿真的一个技术问题研究

对寻的制导系统半实物仿真时转台如何模拟真实的弹体角运动问题进行了研究。指出了仿真实验室目标阵面视角范围的限制以及三轴转台模拟弹体角运动存在的问题对仿真的影响，并通过引入动参考坐标系以及相应的坐标转换提出了解决问题的方法，对实现方法的不足也作了相应的说明。实践证明，该方法是简单可行的。