太阳微波爆发精细结构与硬X射线耀斑的相关

北京天文台在２．８４ＧＨｚ频率上观测到的带短时标精细结构的微波爆发与日本ＹＯＨＫＯＨ卫星上ＨＸＴ在１９９１年１０月－１９９２年１２月观测到的硬Ｘ射线爆发（ＨＸＢ）事件作了比较，发现在２０个微波精细结构爆发事件只有１２个与ＹＯＨＫＯＨ卫星记录的ＨＸＢ有对应关系．本文对１９９２年６月７日典型事件中２．８４ＧＨｚ与ＨＸＢ共同存在的百秒量级的准周期振荡作了分析及源区参数的计算，并作了简要的讨论．     

Ku波段波导扫频双六端口网络分析仪

介绍研制的一种实用Ku波段扫频双六端口网络分析仪。该仪器能同时测量双口网络的4个散射参数及单口网络的复反射系数。     

六端口微波测量技术

六端口技术是从70年代初发展起来的一项新的微波自动测量技术。经过十多年来各国科技工作者的研究、实践,无论在理论上,还是在系统构成、误差分析等方面均趋于成熟。该技术目前已广泛应用于微波计量、安全防护和工业在线检测诸部门。由六端口网络组成的自动网络分析仪,可望成为技术性能高的自动测试系统。本文分四个部分,系统地介绍了六端口技术的发展及其在微波测量中的应用;几种常用六端口结的组成及其设计准则;六端口自动网络分析仪的校准及其测量方法,以及如何评定六端口网络分析仪不确定度等问题,供从事微波计量测试及有关人员参考。     

太阳射电微波爆发的频谱分析

1981年4月1日太阳发生一个4N级Hα耀斑并伴随出现强烈的IV型射电爆发.本文对北京天文台,西澳大利亚站等射电资料进行分析.分析表明:(1)该事件的微波源状态相对稳定,米波源位置存在移动,因此产生微波辐射与米波辐射是两组不同的电子群体,在爆发频谱指数的时变曲线上表现出明显的形态差异.还由于两者辐射源的位置不同,微波与米波的爆发在峰值时刻上也不完全符合.(2)4月1日微波大爆发是由三个主爆发组成的,它们的峰值时刻分别为0135.1,0146.1,0153.6UT.由射电高频端谱指数算出的非热电子能谱指数表明,在射电爆发的三个峰值时刻电子能谱都变硬.本文还得出该活动区的非热电子平均速度(以光速c为单位)β为0.9左右,磁场强度B为430G.并由回旋同步辐射阻尼算得,非热电子的寿命为829秒,这个数值与三个主峰的持续时间相吻合.     

A novel surrogate modeling strategy of the mechanical properties of 3D braided composites

In this paper, a surrogate-based modeling methodology is developed and presented to predict the elastic properties of three dimensional (3D) four-directional braided composites. Using this approach, the prediction process becomes feasible with only a limited number of training points. The surrogate models constructed using Finite Element (FE) method and Diffuse Approximation, reduce the computational time and cost for preparing experimental samples. In the FE model, multiscale method is applied to couple the computations of elastic properties at microscale and mesoscale. Subsequently, a parametric study is performed to analyze the effects of the three design parameters on the elastic properties. Satisfactory results are obtained via the surrogate-based modeling predictions, which are compared with the experimental measurements. Moreover, the predictions obtained from surrogate models concur well with the FE predictions. This study orients a new direction for predicting the mechanical properties based on surrogate models which can effectively reduce the sample preparation cost and computational efforts.     

Influence of TiB2 particles on machinability and machining parameter optimization of TiB2/Al MMCs

In situ formed TiB₂ particle reinforced aluminum matrix composites (TiB₂/Al MMCs) have some extraordinary properties which make them be a promising material for high performance aero-engine blade. Due to the influence of TiB₂ particles, the machinability is still a problem which restricts the application of TiB₂/Al MMCs. In order to meet the industrial requirements, the influence of TiB₂ particles on the machinability of TiB₂/Al MMCs was investigated experimentally. Moreover, the optimal machining conditions for this kind of MMCs were investigated in this study. The major conclusions are: (1) the machining force of TiB₂/Al MMCs is bigger than that of non-reinforced alloy and mainly controlled by feed rate; (2) the residual stress of TiB₂/Al MMCs is compressive while that of non-reinforced alloy is nearly neutral; (3) the surface roughness of TiB₂/Al MMCs is smaller than that of non-reinforced alloy under the same cutting speed, but reverse result was observed when the feed rate increased; (4) a multi-objective optimization model for surface roughness and material removal rate (MRR) was established, and a set of optimal parameter combinations of the machining was obtained. The results show a great difference from SiC particle reinforced MMCs and provide a useful guide for a better control of machining process of this material.     

纤维增韧陶瓷基复合材料的比例极限应力与残余热应力关系

从细观力学角度分析并建立了纤维增韧陶瓷基复合材料从制备温度冷却到室温过程中产生的残余热应力与复合材料的比例极限应力的关系模型。该模型表明,减少复合材料的残余热应力或提高复合材料的纤维与基体的模量比,均可提高复合材料的比例极限应力。通过单调拉伸实验测试了先驱体浸渍裂解法(PIP)制备的2D SiC/SiC复合材料的比例极限应力,并采用文中建立的比例极限应力与残余热应力关系模型,计算出复合材料SiC基体的残余热应力为-19.5 MPa。分析表明,该结果是合理的。此外,引用了公开文献报道的5种复合材料体系数据,用于验证文中所建立的比例极限应力与残余热应力关系模型的适应性和可靠性,计算结果与实验结果最大误差为18.6%,表明该模型具有较好的适应性和可靠性,可为纤维增韧陶瓷基复合材料的研究提供新思路。     

Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.     

镍锌铁氧体吸波材料研究进展

综述了镍锌铁氧体吸波材料的研究情况。从磁性能、配方对吸波性能的影响,以及与其他材料复合对吸波性能的影响等方面,对镍锌铁氧体吸波材料进行比较全面的总结,并与我司研究情况进行对比,希望对镍锌铁氧体吸波材料的开发与应用提供支持。     

基于纳米吸能流体的火工点式分离装置缓冲技术研究

运载火箭火工点式分离装置工作时具有强冲击载荷特性,为有效降低冲击峰值,提出了一种基于纳米吸能流体结构的冲击缓冲技术。首先进行纳米吸能流体的吸能原理研究,建立其本构关系,揭示影响其吸能密度的主要因素;其次开展火工装置有限空间内的纳米吸能流体缓冲结构设计;最后通过有限元仿真与试验验证其缓冲性能。试验结果表明,本文设计的基于纳米吸能流体的缓冲结构,吸能密度高达122.8 J/g,冲击力峰值较空载条件下降了59.2%,冲击加速度峰值下降了63.4%。