基于ZigBee技术的切削力数据采集系统的研究

将ZigBee无线通信技术引入到切削力数据采集系统中,组成一个车间机床切削力管理网络.该系统以SOC射频芯片CC2531为核心,利用其内部集成的A/D转换器实现数据的数模转换,并由其RF收发器来完成数据的无线发送和接收.从硬件和软件上设计了测力仪和整个网络系统,通过车削棒料对该系统进行了试验,结果表明数据稳定可靠,三个方向的切削力精度也较高.     

现代切削技术的发展趋势

本文论述了当前切削加工技术发展的主要趋势，介绍了切削技术发展中的关键技术、发现状及发展方向。     

挠性接头电火花线切割加工工艺探索

为了提高挠性陀螺中挠性接头细颈加工精度,减小加工表面残余应力,提出了多次切割,控制线切割走丝轨迹等一系列工艺措施。     

钛合金的切削加工工艺分析

结合钛合金的性能特点,分析了影响钛合金切削加工的主要因素,并提出解决方法。     

高性能大功率可控硅整流脉冲电源

本文介绍了一种应用可控硅整流即可实现脉冲输出的新方法,脉冲频率最高为150Hz.这种方法控制简单,性能价格比高.特别是在大功率电源中,有极大的优越性.通过焊接及铸造工艺应用,取得了良好效果.     

数控慢走丝线切割机床锥度切割的方法

模具行业的迅速发展推动了电火花线切割技术的进步，数控慢走丝线切割机床以其自动化程度高、精度好、加工稳定、可靠的优点开辟了广阔的市场前景。本文主要介绍了FUNAC线切割机床锥度切割的方法，重点介绍了当锥度有误差时，应如何进行补偿。     

Tool Life and Surface Integrity in High-speed Milling of Titanium Alloy TA15 with PCD/PCBN Tools

Titanium alloys are widely used in aeronautics that demand a good combination of high strength, good corrosion resistance and low mass. The mechanical properties lead to challenges in machining operations such as high process temperature as well as rapidly increasing tool wear. The conventional tool materials are not able to maintain their hardness and other mechanical properties at higher cutting temperatures encountered in high speed machining. In this work, the new material tools, which are polycrystalline diamond (PCD) and polycrystalline cubic boron nitride (PCBN) tools, are used in high-speed milling of Ti-6.5Al-2Zr-1Mo-1V (TA15) alloy. The performance and wear mechanism of the tools are investigated. Compared to PCBN tool, PCD tool has a much longer tool life, especially at higher cutting speeds. Analyses based on the SEM and EDX suggest that attrition, adhesion and diffusion are the main wear mechanisms of PCD and PCBN tools in high-speed milling of TA15. Oxidation wear is also observed at PCBN tool/workpiece interface. Roughness, defects, micro-hardness and microstructure of the machined surface are investigated. The recorded surface roughness values with PCD/PCBN tools are bellow 0.3 μm at initial and steady cutting stage. Micro-hardness analysis shows that the machined surface hardening depth with PCD and PCBN tools is small. There is no evidence of sub-surface defects with PCD and PCBN tools. It is concluded that for TA15 alloy, high-speed milling can be carried out with PCD/PCBN tools.     

MQL切削的现状和发展

简介了MQL切削的现状及发展趋势。     

复杂型面微小零件精密切削工艺研究

在自研的微小零件精密加工机床上,通过分析复杂型面造型技术、刀具路径规划方法和切削用量优化选择,开展了金属材料复杂形面微小零件的精密切削工艺研究,加工出了硬铝材料制作、典型的高精度复杂形面微小零件样件。     

正交切削刀具应力的有限元分析

应用有限元方法计算了正交切削刀具的应力.对正剪切和负剪切的应力分布进行了比较,分析了负剪切易引起刀具破损的原因;对刀具前角分别为 0°、10°、15°时的等效应力进行了对比,分析了刀具前角变化对刀具强度的影响.