国外几种新型微化学推力器

介绍了国外几种以微机电系统 (MEMS)技术为基础的液体和固体微化学推力器。这些新型微化学推力器具有MEMS技术微型化、低成本和批量生产的优点 ,并考虑了体积限制和高度集成等空间限制 ,能产生 10 -6～ 10N·s的推力脉冲 ,可用于微型卫星和纳米卫星的姿态调整、变轨和定向的精确控制。同时阐述了这几种微推力器结构特点和制造工艺 ,并与其他类型的推进器进行了比较     

空间相机中与大口径透镜有关的结构设计分析

某空间相机镜头在光学设计时，因透过率、吸收率等原因，为了满足光学系统要求，经过各方面平衡后，其中有一片透镜比正常径厚比设计的偏薄些。在镜头总体结构设计时，单独对该镜片及与之相配的结构件进行了有限元分析和实验检测，发现不同的结构形式对镜片面形影响不同。为了解决这一问题，在实验中进行了探讨，以保证整个相机系统满足空间相机的实用要求。     

有关压力传感器可靠性设计的若干问题

论述压力传感器的研制和应用中的经验教训。着重讨论从任务书要求，工程化设计，到生产过程有关压力信号特征、压力接口以及功能与结构相关性，功能与材料相关性等问题。     

基于PCI总线的PC机再入遥测站设计

根据再入遥测的特点 ,提出基于 PCI总线和 Windows平台的 PC机再入遥测站的体系结构 ,重点对其关键技术即多通道高速数据的实时传输与存储技术进行研究     

大型柔性整流罩抛罩多体动力学仿真

在考虑结构弹性变形、空间大范围相对运动，以及弹性运动与刚体运动耦合的基础上，建立了运载火箭整流罩的有限元分析模型。采用MSC．NASTRAN和ADAMS软件仿真模拟了新一代大运载火箭整流罩不同设计方案的地面分离，并与试验结果进行了比较。分析表明，整流罩的多个仿真模拟分离参数与试验值较为接近，证明本文的整流罩抛罩多体动力学仿真方法有效。     

挤压工艺对镁合金组织性能的影响

介绍了ＭＢ１５镁合金棒材和型材的挤压成形工艺，以及不同挤压成形工艺生产的棒材，型材的组织及性能情况。论述了一次和二次压成形工艺对镁合金棒材和型材的组织、性能的影响。     

碳纤维作宿主的FeCl3-GIC的合成与结构表征

采用混合熔融盐法成功地合成了以PAN基高模量碳纤维作宿主，FeCl3作插层剂的石墨层间化合物，采用XRD技术对其层间结构进行了表征。结果表明，所得产物内部已经形成混阶的阶结构。通过SEM和TEM观察了其形貌和结构的变化，同时利用EDS测定了各元素的相对含量。     

环境专业教学体系结构改革探索——以就业市场需求为导向

通过对西安航专2006与2007年环境监测与治理技术专业毕业生就业情况的对比分析，认为目前环境类专业的就业形势发生良性转变，需求范围增加，同时就业单位对毕业生的专业技术能力、技术管理能力等也提出了更高的要求。据此，我们从专业发展方向、课程体系结构以及实验实训三个方面进行建设与调整来满足就业单位的需求。     

Observations of loops and prominences

We review recent observations by the Yohkoh-SXT in collaboration with other spacecraft and ground-based observatories of coronal loops and prominences. These new results point to problems that SoHO will be able to address. With a unique combination of rapid-cadence digital imaging (32 s full-disk and 2 s partial-frame images), high spatial resolution (2.5 arcsec pixels), high sensitivity (EM 10⁴² cm^–3), a low-scatter mirror, and large dynamic range, SXT can observe a vast range of targets on the Sun. Over the first 21 months of Yohkoh operations, SXT has taken over one million images of the corona and so is building up an invaluable long-term database on the large-scale corona and loop geometry. The most striking thing about the SXT images is the range of loop sizes and shapes. The active regions are a bright tangle of magnetic field lines, surrounded by a network of large-scale quiet-Sun loops stretching over distances in excess of 10⁵ km. The cross-section of most loops seems to be constant. Loops displaying significant increase in the ratio of the footpoint to loop-top diameter () are the exception, not the rule, implying the presence of widespread currents in the corona.All magnetic structures show changes. Time scales range from seconds to months. The question of how these structures are formed, become filled with hot plasma, and are maintained is still open. While we see the propagation of brightenings along the length of active-region loops and in X-ray jets with velocities of several hundred km/s, much higher velocities are seen in the quiet Sun. In XBP flares, for example, velocities of over 1000 km/s are common. Active-region loops seem to be in constant motion, moving slowly outward, carrying plasma with them. During flares, loops often produce localized brightenings at the base and later at the apex of the loop. Quiescent filaments and prominences have been observed regularly. Their coronal manifestation seems to be an extended arcade of loops overlying the filament. Reliable alignment of the ground-based data with the X-ray images make it possible to make a detailed intercomparison of the hot and cold plasma structures over extended periods. Hence we are able to follow the long-term evolution of these structures and see how they become destabilized and erupt.     

一种新颖的瞬时浮点放大器

介绍了瞬时浮点放大器的原理及构成，并给出一种结构新的具有２５６阶的瞬时浮点放大器，可有效地提高数据采集系统的测量范围。