微型磁通门传感器研究的现状与未来发展

叙述微型磁通门传感器研究的现状 ,介绍微型磁通门传感器的结构和加工工艺 ,比较不同类型微型磁通门的差异 ,探讨微型磁通门传感器研究的发展方向     

微纳米尺度流动实验研究的问题与进展

微纳米实验流体力学研究的流动特征尺度在1mm～1nm范围,处于宏观流动到分子运动的过渡区。连续介质力学与量子力学这两个经典理论的衔接,提出了诸如连续性假设适用性、边界滑移等基本理论问题。同时从微纳米尺度研究界面处液/固/气的耦合,化学、电学性质对流动的影响值得关注。微纳米实验测量仪器融入了力、电等测量手段,要求测量空间精度达到nm量级,力的测量精度达到pN,时间分辨率达到ns。本文围绕连续性假设适用性、边界滑移、微纳米粒子布朗运动及微尺度涡旋测量等问题,介绍了 Micro/Nano PIV、示踪粒子流场显示等技术应用于微纳流场观测的进展与难点。目前微纳米流动测量仍然沿着经典流体力学测量“小型化”的思路开展,而纳尺度的测量期待着新的实验方法与技术的提出。     

机匣沟槽对微型轴流涡轮叶尖泄漏流动的影响

本文通过对某微型涡喷发动机的单级轴流式涡轮进行机匣设计,采用剪切应力输运(SST)模型求解定常黏性雷诺平均Navier-Stokes方程,研究了不同机匣沟槽结构对其叶尖泄漏流动的影响。计算结果说明：当全机匣沟槽结构的叶顶浸入沟槽即d/c＞1.0时,封严效果较好;相较于全机匣沟槽结构,后开式机匣沟槽结构的封严效果更好, 随着沟槽前缘间隙的增大,封严效果减弱;沟槽深度a/c=1时,封严效果最佳,即泄漏流明显减弱,同时效率减小量较小。     

交流阻抗测量系统中交流小电流测量方法

交流小电流测量是交流阻抗测量的关键技术之一。分析了交流小电流测量对交流阻抗测量的影响,提出采用数字相敏检波原理测量交流小电流的方法,利用互相关技术有效克服放大器噪声对交流小电流测量的影响,完成了交流阻抗测量的预期功能,达到了预期的效果。     

小卫星最佳温度动态范围热控设计方法研究

为探索低热惯性小卫星动态传热下的热控设计方法,首先建立双层集总参数模型,在得到温度时均量解析解的基础上,类比阻尼振荡系统,采用傅里叶变换法求解温度波动量解析解,从而建立周期变化外热流下温度动态变化与热控参数间的解析关系。以此为基础提出“最佳温度动态范围”热控设计新方法。对某型微小卫星进行“最佳温度动态范围”热控设计,并通过其在轨温度遥测量动态变化对该方法的准确性和可行性进行验证。     

Review on bio-inspired flight systems and bionic aerodynamics

Humans' initial desire for flight stems from the imitation of flying creatures in nature. The excellent flight performance of flying animals will inevitably become a source of inspiration for researchers. Bio-inspired flight systems have become one of the most exciting disruptive aviation technologies. This review is focused on the recent progresses in bio-inspired flight systems and bionic aerodynamics. First, the development path of Biomimetic Air Vehicles (BAVs) for bio-inspired flight systems and the latest mimetic progress are summarized. The advances of the flight principles of several natural creatures are then introduced, from the perspective of bionic aerodynamics. Finally, several new challenges of bionic aerodynamics are proposed for the autonomy and intelligent development trend of the bio-inspired smart aircraft. This review will provide an important insight in designing new biomimetic air vehicles.     

Investigation of vertical profile of rain microstructure at Ahmedabad in Indian tropical region

The microstructure of rain has been studied with observations using a vertical looking Micro Rain Radar (MRR) at Ahmedabad (23.06°N, 72.62°E), a tropical location in the Indian region. The rain height, derived from the bright band signature of melting layer of radar reflectivity profile, is found to be variable between the heights 4600 m and 5200 m. The change in the nature of rain, classified on the basis of radar reflectivity, is also observed through the MRR. It has been found that there are three types of rain, namely, convective, mixed and stratiform rain, prevailing with different vertical rain microstructures, such as, Drop Size Distribution (DSD), mean drop size, rain rate, liquid water content and average fall speed of the drops at different heights. It is observed that the vertical DSD profile is more inhomogeneous for mixed and stratiform type rain than for convective type rain. It is also found that the large number of drops of size <0.5 mm is present in convective rain whereas in stratiform rain, drops concentration is appreciable up to 1 mm. A comparison of measurements taken by ground based Disdrometer and that from the 200 m level obtained from MRR shows good agreement for rain rate and DSD at smaller rain rate values. The results may be useful for understanding rain structures over this region.     

地磁暴期间中国中低纬电离层的CIT研究

利用电离层层析成像技术(Computerized Ionospheric Tomography, CIT)处理115°E子午圈附近6个台站的GPS观测数据, 分析了2004年11月地磁暴期间中国中低纬电离层的响应情况. 结果表明, 电离层呈正相扰动, 且不同高度上的响应不同, 800 km以下电子密度有不同程度的增加, 且在峰值高度附近增幅最大, 800 km以上地磁暴的影响并不显著; 伴随地磁能量的注入, 赤道异常峰极向扩展; 随磁扰强度的降低, 电子密度也逐渐恢复至平静水平. 这些结果与以往的理论和观测结果一致, 初步估计扰动是由热层暴环流引起的, 并受到赤道异常峰移动的影响.      

Computational aerodynamic analysis on perimeter reinforced （PR）-compliant wing

Abstract Implementing the morphing technique on a micro air vehicle （MAV） wing is a very chal- lenging task, due to the MAWs wing size limitation and the complex morphing mechanism. As a result, understanding aerodynamic characteristics and flow configurations, subject to wing structure deformation of a morphing wing MAV has remained obstructed. Thus, this paper presents the investigation of structural deformation, aerodynamics performance and flow formation on a pro- posed twist morphing MAV wing design named perimeter reinforced （PR）-compliant wing. The numerical simulation of two-way fluid structure interaction （FSI） investigation consist of a quasi- static aeroelastic structural analysis coupled with 3D incompressible Reynolds-averaged Navier- Stokes and shear-stress-transport （RANS-SST） solver utilized throughout this study. Verification of numerical method on a rigid rectangular wing achieves a good correlation with available exper- imental results. A comparative aeroelastic study between PR-compliant to PR and rigid wing per- formance is organized to elucidate the morphing wing performances. Structural deformation results show that PR-compliant wing is able to alter the wing＇s geometric twist characteristic, which has directly influenced both the overall aerodynamic performance and flow structure behavior. Despite the superior lift performance result, PR-compliant wing also suffers from massive drag penalty, which has consequently affected the wing efficiency in general. Based on vortices investigation, the results reveal the connection between these aerodynamic performances with vortices formation on PR-comoliant wing.     

用于微小卫星自主导航控制系统地面仿真的磁强计数学模型

对基于磁强计自主导航微小卫星控制系统地面仿真的磁强计数学模型建立进行了研究。给出了地磁场理论数据的生成模型及磁强计的测量模型,并据此建立了磁强计测量数据生成的数学模型。对低轨圆轨道微小卫星的仿真计算结果表明：由该磁强计数学模型获得的磁场强度测量值与文献中真实磁强计测量数据差异很小,验证了模型的有效性和准确性。