柔性电极电火花强化钛合金表面性能

采用旋转的柔性铜电极与钛合金表面在高频脉冲电源的作用下进行电火花表面强化,使空气中的氧等元素在放电形成的高温高压条件下与钛合金表面发生反应。结果表明:该试验条件下可以使钛合金表面硬度相对基体提高237%～399%;强化层厚度达到21～157μm;通过能谱分析(Energy dispersive spectrometer,EDS)及X射线衍射(X-ray diffraction,XRD)分析表明,在钛合金表面生成了钛的氧化物等强化物质和钛与铜、锌等的合金;强化表面不存在明显的传统放电蚀除凹坑,但有明显机械刮磨涂覆痕迹,同时单脉冲放电能量被分散,使得表面粗糙度值的提高量较小且可控;在氢氟酸和硝酸混合溶液中,强化层具有较高的抗腐蚀能力,经过点面磨损测试表明,强化层表面耐磨性能相对于基体表面有显著提高。经强化,能够获得具有良好耐磨性、抗腐蚀性、表面良好的钛合金。     

TC4钛合金薄壁带筋锥形环辗轧充填规律

钛合金薄壁带筋锥形环件是航空航天关键基础构件,型槽充填不满、截面轮廓难以精确成形,是该复杂异形环件精密辗轧成形面临的瓶颈问题。本文分析了影响型槽充填行为的关键影响因素,即决定塑性变形行为的每转进给量、以及决定每转进给量在环件内外表面分配比例的驱动辊半径和芯辊半径;以某TC4钛合金薄壁带外筋锥形环辗轧为研究对象,通过ABAQUS的VUAMP子程序开发,建立了实现以常每转进给量进给的芯辊运动闭环控制有限元仿真模型;进而模拟揭示了每转进给量、驱动辊半径和芯辊半径对型槽充填质量(充填率、型槽入口变形及其均匀性)的影响规律。结果表明:随着每转进给量增大,充填率先增大后减小,表明存在一个最佳的每转进给量最利于充填;随着每转进给量增大,型槽入口区域变形越小且分布越均匀,可有效抑制该区域产生裂纹缺陷;随着驱动辊半径增大,充填率逐渐减小,不利于型槽充填;随着芯辊半径增大,充填率逐渐增大,有利于型槽充填。     

矩形截面型材拉弯成形

针对铝合金矩形中空截面挤压型材进行了不同预拉和补拉的拉弯成形试验研究,获取了预拉和补拉对成形精度的影响规律.截面畸变是影响成形精度最主要的因素,由弯曲过程中的径向压力引起.试验表明,型材靠模弯曲即发生截面畸变,主要表现为上腹板的塌陷,沿型材长度方向截面畸变量不同,最大畸变量并不位于型材中间对称截面处;增大预拉和补拉,截面畸变增大.弯曲卸载回弹是影响零件贴模度的主要因素,其大小受多种因素影响,规律复杂.增大预拉和补拉,回弹减小;当预拉和补拉增大到一定值时,增大拉伸量减小回弹的效果不再明显.     

Effects of traverse speed on weld formation,microstructure and mechanical properties of ZK60 Mg alloy joint by bobbin tool friction stir welding

ZK60B (Mg-6% Zn-0.6% Zr) alloy joints fabricated by bobbin tool friction stir welding (BTFSW) with various traverse speeds were investigated. The sound joint fabricated by the BTFSW was possible under the appropriate welding parameters. The severe plastic deformation during BTFSW resulted in dispersion and segregation of the Zr-rich particles within the stirred zone (SZ) followed by evolution of a bimodal grain structure with distributed bands of 0.8–1.7 μm ultrafine grains and 4.1–7.1 μm equiaxed grains. Micro-hardness of SZ is substantially reduced in contrast to that of parent metal (PM) in spite of the finer grain size owing to dissolution of Mg-Zn based precipitates having hardening effects on alpha-Mg matrix. With the decrease in traverse speed, randomization degree of the plasticized metal flow increases, which is evidenced by the randomized arc line pattern at the low traverse speed. Among all defect-free joints, the 200 mm/min joint exhibits the weakest isotropy of texture within SZ and the best tensile properties, which has reduced ultimate tensile strength and yield strength by 5.4% and by 22.2%, respectively, as compared to the PM. The randomized texture hinders the joint fracturing within SZ at low elongation. Therefore, a relatively high elongation of 10.8% was achieved, which corresponded to 72% of the PM value.     

预变形对铝锂合金强度和韧性的影响

研究了时效前预变形对铝锂合金强度和韧性的影响,分析了时效前的预变形使冲压体件强度和塑性提高的原因。结果表明：铝锂合金2090与时效处理相匹配的最佳预变形量为5%～10%;而对于Mg/Cu=0.4的8090,其预变形量以6%～8%为佳;对于Mg/Cu=0.8的8090,其预变形量以2%～6%为佳。     

1.0 wt% Li对Al-Zn-Mg-Cu合金析出相的影响(英文)

Microstructure control always plays a key role in enhancing properties of high-strength Al alloys. Attempts to improve the microstructure of 7000 series alloys by addition of 1.0 wt% Li have been made for a long time, but unsystematically. This article compares the microstructural features of 1.0 wt% Li-containing A1-Zn-Mg-Cu alloy with those of Li-free Al-Zn-Mg-Cu alloy by using differential scanning calorimetric （DSC） techniques, Vickers microhardness and transmission electron microscopy （TEM）. The results show the dominance of Guinier Preston （GP） zones, η＇ or η phases in 1.0 wt% Li-containing Al-Zn-Mg-Cu alloy, and confirm the capability of Li to retard the rate of precipitates growth and coarsening.     

基于微观结构的航空铝合金点蚀扩展行为研究

点蚀是航空铝合金材料在服役环境下常见的损伤形式,在疲劳载荷作用下容易形成裂纹,缩短结构的疲劳寿命。为了深入研究点蚀对航空铝合金结构腐蚀疲劳寿命的影响,基于铝合金电化学腐蚀机理和铝合金微观结构,以点蚀蚀坑尺寸为研究参量,对航空铝合金点蚀扩展行为进行建模研究,并将模型计算结果与LY12CZ铝合金点蚀试验结果进行对比分析。结果表明:所构建的铝合金点蚀扩展模型较为合理地反映了铝合金点蚀蚀坑尺寸参数的变化规律。     

八面钻超声振动钻削钛合金出口毛刺形成机理

钛合金在传统麻花钻常规钻孔后,会产生较大的孔出口毛刺,这将导致孔出口去毛刺困难且影响紧固件装配质量。本文引入一种八面钻新刃型刀具,并利用超声振动钻削技术,进行了八面钻超声振动钻削钛合金出口毛刺形成的基础理论和试验研究。理论分析了普通钻削和超声振动钻削的出口毛刺形成过程以及超声振动钻削的出口毛刺降低机理,同时试验验证了超声振动钻削的出口毛刺降低效果。结果表明:相比于钛合金普通钻削,超声振动钻削极大地提高了钻头刀具的切削能力,分别降低了钻削力16%~20%、切削温度18%~21%和出口毛刺高度82%~89%,有效降低了装配过程的去毛刺困难和生产成本。     

Influence of Low Load Truncation Level on Crack Growth for Al 2324-T39 and Al 7050-T7451

Tests with middle-crack tension (M(T)) specimens made of Al 2324-T39 and Al 7050-T7451 are conducted to investigate the influence of low load truncation level on fatigue crack growth. The six different truncated spectra are obtained by removing the small cycles of which amplitudes are less than the specified percentages of the maximum amplitude in the basic flight-by-flight loading spectrum and the remainder of the spectrum is untouched. The tests indicate that the mean level of fatigue crack growth life (FCGL) increases as the load truncation level is enhanced. Considering both the time saving and the influence on FCGL, there is an applicable choice (i.e. spectrum S2 or spectrum S3 in this investigation) for full scale fatigue test. The scatter of FCGL becomes much larger than that under the basic spectrum when the load truncation level is increased to a specified high level, mainly due to the occurrence of crack slanting and branching under the high level truncated loading spectra.     

高强合金与钛合金的电偶腐蚀行为

采用电偶腐蚀实验方法、扫描电镜和能谱方法等研究了高强合金与钛合金异接电偶腐蚀行为.从不同材料、不同成分对电偶腐蚀的影响,研究了电偶腐蚀的规律及电偶对偶接的可能性.同时比较了铝合金和高强度钢与钛合金电偶腐蚀行为的差异,探讨了自腐蚀电位差与电偶电流密度的关系.实验表明,铝合金LY12、铝合金LC4、高强度钢30CrMnSiA均不能与TC2钛合金偶接,高强度钢1Cr17Ni2则可以与TC2偶接,且电偶电流密度随自腐蚀电位差增大而增大.