铝合金薄板K_c测试新方法的探讨

通过用圆(或椭圆)孔试件测量金属薄板平面应力断裂韧性Kc的方法,与通过用中心穿透裂纹试件Kc的标准方法相比较之后,将Whitney和Nuismer用于复合层压板中的点应力破坏准则,推广到铝合金薄板Kc的测量。 在理论和实验分析的基础上,拟合出与实验结果相一致的经验公式。     

方板对角拉伸诱导压应力的分析

利用有限元法分析方板在单向和双向对角拉伸条件下诱导压应力的变化规律。计算和实验表明,施加横向拉力,实现双轴向拉伸,能明显减小横向诱导压应力及其分布范围,从而抑制皱曲的发生和发展。     

相控阵雷达扫描波位和扫描时间的设计与优化

详细讨论了在相控阵雷达设计中扫描波位如何确定的问题。扫描波位的确定原则是使雷达系统既满足一定的检测概率和作用距离，又能在最短的时间内扫描整个空域。这就必须在波位驻留时间和平均增益损失等因素之间进行折衷。为了进一步节省扫描时间，还对如何利用数字波束形成（ Ｄ Ｂ Ｆ） 技术实现优化进行了探讨。     

脉冲微孔喷射技术及其在增材制造方面的应用

介绍了用于制造单分散球形微米级粒子的脉冲微孔喷射技术.根据微滴制备原理,可将其分为适用于低熔点材料的压片式喷射装置及适用于高熔点材料的传动杆式喷射装置,分别阐述了两种方式的脉冲微孔喷射技术的喷射原理、相关特点以及该技术的发展和研究现状.目前,采用脉冲微孔喷射技术已成功制备出金属、半导体及生体材料单分散微粒子,具有粒径均一、圆球度高等优势.通过与其他微米级粒子制备技术,如均匀液滴喷射法、气动式按需喷射法及雾化法相比较,在诸多方面显示出脉冲微孔喷射法的独特优点.与此同时,分别讨论了脉冲微孔喷射技术在增材制造方面的潜在应用,可直接使用微米级粒子作为增材制造用粉体以及液滴沉积成型.鉴于脉冲微孔喷射技术的独特性,可以预见随着研究的不断深入,脉冲微孔喷射技术将在增材制造方面具有更加广阔的发展空间和应用前景.     

圆筒形拉伸冲压零件下料公式的修正方法

在冲压拉伸制造薄板形零件的模具设计制造中,通常都是先利用公式计算出落料尺寸,根据这个尺寸制造出落料凸模和落料凹模,试生产后再根据制件的误差对落料凸模和落料凹模进行修改,如果成本高,效率低,就通过探讨误差生成的原因以及做出应对的修正方法,从缩小误差,提高试生产效率方面考虑,设法缩短试制时间。     

基于响应曲面的时效成形材料参数修正

为了提高时效成形中回弹现象的有限元仿真精度,使用均匀试验设计结合响应曲面设计的方法,建立了仿真误差对于材料参数的响应函数,求解出材料参数的修正解。以此法得到的仿真结果与试验结果相吻合。     

喷射成形过程雾化熔滴质量流率空间分布的研究

喷射成形是材料领域新出现的高新科学技术。本文研究了喷射成形雾化熔滴射流质量流率和沉积速率的分布规律，建立了它的空间分布函数。结果表明随着雾化压力的增加和沉积距离减小，雾化喷射流变得更集中。     

Blank Panel Design of Integral Wing Skin Panels Based on Feature Mapping Methods

A blank panel design algorithm based on feature mapping methods for integral wing skin panels with supercritical airfoil surface is presented.The model of a wing panel is decomposed into features,and features of the panel are decomposed into information of location,direction,dimension and Boolean types.Features are mapped into the plane through optimal surface development algorithm.The plane panel is modeled by rebuilding the mapped features.Blanks of shot-peen forming panels are designed to identify the effectiveness of the methods.     

Friction Stir Welding of Metal Matrix Composites for use in aerospace structures

Friction Stir Welding (FSW) is a relatively nascent solid state joining technique developed at The Welding Institute (TWI) in 1991. The process was first used at NASA to weld the super lightweight external tank for the Space Shuttle. Today FSW is used to join structural components of the Delta IV, Atlas V, and Falcon IX rockets as well as the Orion Crew Exploration Vehicle. A current focus of FSW research is to extend the process to new materials which are difficult to weld using conventional fusion techniques. Metal Matrix Composites (MMCs) consist of a metal alloy reinforced with ceramics and have a very high strength to weight ratio, a property which makes them attractive for use in aerospace and defense applications. MMCs have found use in the space shuttle orbiter's structural tubing, the Hubble Space Telescope's antenna mast, control surfaces and propulsion systems for aircraft, and tank armors. The size of MMC components is severely limited by difficulties encountered in joining these materials using fusion welding. Melting of the material results in formation of an undesirable phase (formed when molten Aluminum reacts with the reinforcement) which leaves a strength depleted region along the joint line. Since FSW occurs below the melting point of the workpiece material, this deleterious phase is absent in FSW-ed MMC joints. FSW of MMCs is, however, plagued by rapid wear of the welding tool, a consequence of the large discrepancy in hardness between the steel tool and the reinforcement material. This work characterizes the effect of process parameters (spindle speed, traverse rate, and length of joint) on the wear process. Based on the results of these experiments, a phenomenological model of the wear process was constructed based on the rotating plug model for FSW. The effectiveness of harder tool materials (such as Tungsten Carbide, high speed steel, and tools with diamond coatings) to combat abrasive wear is explored. In-process force, torque, and vibration signals are analyzed to assess the feasibility of on-line monitoring of tool shape changes as a result of wear (an advancement which would eliminate the need for off-line evaluation of tool condition during joining). Monitoring, controlling, and reducing tool wear in FSW of MMCs is essential to the implementation of these materials in structures (such as launch vehicles) where they would be of maximum benefit.     

金属粉末燃烧装置凝相产物反弹特性实验研究

为获得金属粉末燃烧装置燃烧产物的反弹特性，进而为金属凝相燃烧产物收集装置的设计提供指导，在收集并分析了铁粉燃烧产物特性的基础上，搭建了壁面碰撞反弹装置，开展了凝相燃烧产物与石墨板反弹特性实验研究，获得了铁粉燃烧产物与石墨板碰撞反弹后的法向反弹系数（en）与切向反弹系数（et）随粒子入射速度、入射角度的影响规律，并拟合了反弹系数多项式。结果表明：真实燃烧产物实验条件下，铁粉凝相燃烧产物的入射速度对en和et影响不显著，但入射角度对en和et的影响较大，表现为en随入射角度的增加而增大，et随入射角度的增加先减后增，但增幅较小，当入射角度大于58°时，et又出现减小的趋势。