排序方式: 共有60条查询结果,搜索用时 62 毫秒
21.
《中国航空学报》2023,36(4):538-555
The quenching-spinning (Q-S) process, i.e., shear spinning after blank quenching, has been increasingly utilized to form 2219 aluminum alloy complex thin-walled components. However, the changes in material property, shape and stress of the blanks after quenching will affect the spinning forming precision. In this study, the rules and mechanisms of these effects are investigated based on a combined finite element (FE) model including blank quenching and component spinning process. The results indicate that the increase of material strength and the existence of distortion of the quenched blank lead to a notable increase in the non-uniformity of the circumferential compressive stress in the spinning area and the increase of the flange swing height during spinning. These changes result in an increase in the wall thickness and component-mandrel gap of the components. The quenching residual stress has little effect on wall thickness and roundness but can noticeably reduce the component-mandrel gap. This is because that the existence of quenching residual stress of the blank can lead to the decrease of the maximum circumferential compressive stress of the workpiece in spinning and an obvious drop in the maximum compressive stress after reaching the stress peak. Quenching distortion is the main factor affecting the roundness. Moreover, the optimized installation way of the blank for spinning is obtained. 相似文献
22.
挠性双自旋卫星的姿态稳定判据 总被引:2,自引:0,他引:2
本文建立了挠性双自旋卫星的姿态稳定性判据。挠性双自旋卫星由半刚性平台、转子以及固连于平台的挠性附件组成,选择由姿态角和模态坐标表示的系统的相对能量函数为Liapunov函数,由此建立的姿态稳定判据由两个部分组成,即忽略附件弹性运动时,半刚性双自旋卫星的姿态稳定条件和附件振动频率所应满足的条件。文中还给出了具体的应用例子。 相似文献
23.
The application of computational fluid dynamics/computational solid method (CFD/CSM) on solving the aero-thermo-elastic problem of spinning rocket is introduced. Firstly, the aerodynamic coefficients of a rocket are calculated, and the results are compared with the available experimental data, which verified the accuracy of the CFD output. Then, analysis is carried using ANSYS Workbench multi-physics coupling platform, which includes fluid, thermal, and structural solvers. The results show that spinning causes a significant effect on the de formations and stresses. Furthermore, thermal stresses due to high temperature at the rocket warhead and tail edges have a dominated effect, even more than those produced by aerodynamic forces. Consequently, this important outcome should be taken into consideration during the rocket design stages. 相似文献
24.
向瑛 《南昌航空工业学院学报》1998,(1):35-40
单片机由于具有功能强,性能价格比高,使用方便等优点,已在工业测试和控制中得到了日益广泛的应用。本文介绍了采用单片机对纺纱机纺纱工艺过程进行自动控制,控制仪的硬件结构、软件设计及抗干扰措施。 相似文献
25.
采用在高温熔盐中阳极氧化的方法处理或制喷丝头,使表面生成一层硬质膜。将该种带膜钽喷丝头用于化学纤维纺丝中,取得了良好的效果。 相似文献
26.
大气层外质量矩控制自旋拦截器的姿态机动效果分析 总被引:2,自引:0,他引:2
针对大气层外质量矩控制自旋拦截器的特点,建立了具有一个可任意活动质量块的拦截器六自由度动力学数学模型;并基于带有一个沿径向运动质量块的姿态动力学模型,分析了姿态控制机理及结构参数对姿态控制效果的影响,通过仿真验证了分析的有效性,为拦截器姿态控制系统的设计奠定了基础。 相似文献
27.
28.
变质心自旋弹头的姿态运动建模与仿真分析 总被引:2,自引:0,他引:2
为了明确直观地表现自旋弹头姿态运动与控制量之间的关系,采用牛顿力学方法建立了自旋弹头的姿态运动模型。选取质量块的运动方式为正弦运动,推导了质量块的运动加速度。为了分析质量块运动对自旋弹头姿态运动的影响,构建了仿真模型,选取质量块的三种不同运动频率进行了对比仿真。仿真结果表明,质量块的运动频率越大,即其运动加速度越大,引起的自旋弹头俯仰角和偏航角的变化范围越大,自旋弹头的机动能力越大。 相似文献
29.
介绍了基于旋转弹丸的ADS毫米波多普勒近程探测系统的组成,建立了某武襄直升机的近程探测系统数学模型,并且对探测系统目标回波的时域、频域和STFT时频域进行了LabVIEW的仿真分析。结果表明,该多普勒近程探测系统仿真具有较好的测试性和工程实用性,在理论和工程上都具有广阔的应用前景。 相似文献
30.
摘要: 针对在轨姿态异常后星体高速自旋情况,开展星体自旋角速度确定方法研究.提出一种基于太阳敏感器测量数据确定自旋角速度的方法,并对自旋角速率确定误差进行分析,得到各误差源对确定精度的影响关系;基于角速率确定误差分析结论,给出根据角速度大小选取不同时间间隔测量数据的策略,通过大时间间隔测量数据的选取,保证小角速度情况下的确定精度.所提出方法的有效性通过数学仿真验证,并在实际应用中基于太阳敏感器遥测数据获取在轨姿态异常卫星角速度. 相似文献