我国企业导入“CI”现状和对策研究

本文通过对我国目前ＣＩ战略实施中存在的“冷”“热”失衡现象的剖析,要挟地阐述了出现这一现象的原因,提出了相应的解决对策。试图通过这一问题的探讨,提醒理论界,设计界和企业界,在进行ＣＩ策划时,要树立正确的理念,不要使ＣＩ流于形式,也不要照抄照搬国外企业的模式,而应把ＣＩ的理念识别,视觉识别,行为识别三个组成部分溶为一体,从而创造出具有中国特色,个性鲜明,独具风格的企业形象。     

环境行为学视角下大学校园步行道路系统分析

应用环境行为学理论,以西北工业大学与陕西师范大学新校区为例,对其步行道路设计进行分析,并通过现状调研发现实际使用过程中存在的问题,建议规划校园平面布局时充分考虑人的行为特征,以人为本构思步行道路.     

高超声速飞行器平稳滑翔弹道设计方法

针对已知攻角和倾侧角的高超声速飞行器平衡滑翔再入问题,提出了满足纵向加速度变化率最小的平稳滑翔弹道概念,并给出了平稳滑翔弹道设计方法.首先采用正则摄动的方法对高度动态微分方程进行求解,获得了精度较高的平稳滑翔高度、弹道倾角和纵向加速度解析解.然后对平稳滑翔弹道的动态特性进行了分析,结果表明该弹道具有自然稳定性和弱阻尼性.进一步给出了弹道振荡的自然频率和阻尼表达式,其中自然频率仅与速度相关,而阻尼则与速度和纵向升阻比相关.最后,通过比较高度偏差的比例反馈、微分反馈和比例+微分反馈3种方案,得出纯微分反馈是实现平稳滑翔的最佳方案,并给出了定阻尼微分反馈系数的表达式.仿真校验表明:该方案具有控制平滑、弹道振荡收敛速度快及鲁棒性好等特点.      

纳米SiC增强碳纤维层合板摩擦磨损性能

为了探寻一种简便的制备纳米SiC增强碳纤维层合板的方法,本文将纳米SiC颗粒均匀分散在无水乙醇中,制备成不同质量分数的SiC试剂,然后均匀喷涂在碳纤维预浸料表面,固化成型。对不同试件进行摩擦磨损实验,得到不同含量的纳米SiC颗粒对碳纤维层合板摩擦因数、磨损量的影响规律,并且对磨损形貌和复合材料的硬度进行分析。实验结果表明：在碳纤维预浸料表面喷涂纳米SiC颗粒能够有效改善碳纤维层合板的摩擦磨损性能;当纳米SiC浓度为1%时,层合板的摩擦因数、磨损量、磨痕的宽度及深度较于不含纳米SiC的层合板分别降低52%,63%,32.3%,54.8%,摩擦磨损性能最好。     

Heat transfer behaviors of some supercritical fluids:A review

Supercritical fluids(e.g., hydrocarbon fuels, water, carbon dioxide, and organic working medium, etc) have been recognized as working media to improve thermal efficiencies in power cycles and energy conversion, and have been used or selected as the working fluids in engineering fields such as aerospace, nuclear power, solar energy, refrigeration, geothermal energy, chemical technology, and so on. To better understand the interesting characteristic or abnormal behaviors of supercritical fluids, m...     

基于多轴同步控制的微尺度双向加载实验系统

针对目前微细成形中材料屈服、强化行为实验研究的不足,提出通过建立多轴同步控制的微尺度双向加载实验系统,实现超薄板在复杂加载路径下的性能表征测试。双向加载实验系统基于四轴独立驱动的硬件组成和上、下位机分布式控制策略,采用数字散斑测量（DIC）计算实验过程的应变。通过建立交流永磁同步电机（PMSM）控制模型,辨识了速度闭环控制参数。在非线性PID控制方法实现单轴位置闭环控制的基础上,基于虚拟主轴法实现了不同位移/载荷比例条件下的四轴同步运动。双向加载实验结果表明:同步控制精度满足位移小于等于0.02 mm、载荷小于等于0.05 kN的要求,可用于超薄板微尺度屈服和强化行为的实验研究。      

Fatigue behavior of direct laser deposited Ti-6.5Al-2Zr-1Mo-1V titanium alloy and its life distribution model

The present work aims to investigate the fatigue behavior of Direct Laser Deposition (DLD) Ti-6.5Al-2Zr-1Mo-1V titanium alloy under constant amplitude stress. 22 pieces of DLD Ti-6.5Al-2Zr-1Mo-1V titanium alloy standard cylinder specimens were tested under a stress level of 800?MPa with a stress ratio of 0.06. Fatigue fractography and fatigue life data were obtained. Through the fracture surface analysis, the specimens were divided into two categories in accordance with the location of crack initiation and defect types. Comparison of fatigue life and behavior between two specimen types was given, which was followed by a discussion about the impact of defect type, size and position on the fatigue life of the specimen. The fatigue test results also show a large variation of fatigue life. To illustrate the statistical characteristics of the fatigue life, probabilistic analysis was performed, and a novel bimodal lognormal model was established. The model has a good fit with the experimental data and can reduce the scatter of the fatigue life significantly.     

2219铝合金热变形行为对精密旋压成形的影响

采用Gleeble-3500热力模拟试验机对2219铝合金进行物理模拟。通过应力-应变曲线和金相组织观察研究了2219铝合金的高温塑性流变行为及其对合金旋压变形的影响。结果显示:2219铝合金在高温塑性变形过程中的流变应力主要受变形温度和应变速率的影响,变形量对其影响不明显;随着变形温度的提高或应变速率的降低,应力-应变曲线中的峰值应力和稳态流变应力均呈现下降的趋势。另外,采用"Gleeble"物理模拟+工艺试验的研制路线有助于实现2219铝合金大型结构件旋压成形的"控形",基于热模拟结果设计特征旋压温度(300～350℃)、进给比(0.6～1.5 mm/r)、变形量(30%)对2219铝板进行旋压变形,可获得内、外表面质量均良好的大型铝合金壳体,其壁厚差0.2 mm,且壳体内型面与理论型面样板单边间隙0.1 mm。     

Fatigue life prediction model of 2.5D woven composites at various temperatures

As one of the new structural layout in the family of woven composites, 2.5D Woven Composites(2.5D-WC) have recently attracted an increasing interest owing to its excellent properties, i.e. high specific strength and fatigue resistance, in the aerospace and automobile industry. Indepth understanding of the fatigue behavior of this material at un-ambient temperatures is critical for the engineering applications, especially in aero-engine field. Here, fatigue behavior of 2.5D-WC at different temperatures was numerically investigated based on the unit cell approach. Firstly, the unit cell model of 2.5D-WC was established using ANSYS software. Subsequently, the temperature-dependent fatigue life prediction model was built up. Finally, the fatigue lives alongside the damage evolution processes of 2.5D-WC at ambient temperature(20 ℃) and unambient temperature(180 ℃) were analyzed. The results show that numerical results are in good agreement with the relevant experimental results at 20 and 180 ℃. Fatigue behavior of 2.5D-WC is also sensitive to temperature, which is partially attributed to the mechanical properties of resin and the change of inclination angle of warp yarns. We hope that the proposed fatigue life prediction model and the findings could further promote the engineering application of 2.5D-WC, especially in aero-engine field.     

基于自由胀形的弯曲管材变形行为

随着制造业轻量化的发展趋势,复杂弯曲异形充液成形管件的应用日益广泛。为了更好地研究弯曲异形复杂管件在充液成形过程中的变形规律,进行可靠的工艺设计。本文通过结合薄膜理论和塑性变形理论对弯曲管件在自由胀形状态下的应力应变进行了理论解析,并通过有限元(FE)分析对理论计算模型进行了验证。FE分析结果与理论模型基本吻合。同时分析了管材在绕弯过程的硬化行为,并探索了在不同的弯曲硬化状态下弯曲管材在自由胀形过程下的破裂位置的规律,并且用实验进行了验证,实验结果与FE分析结果吻合。