《机械制造技术》课程特点与现场教学

《机械制造技术》课程具有很强的综合性和实践性、教学难度大的特点。教学中要以理论教学和现场教学相结合的方法，以提高教学效率和质量。同时要正确选择课题、设计合适的教学方法是改革现场教学的主要措施。     

对广东计量检测市场的考察与思考

通过对广东省计量校准机构的考察，从市场观念、管理运行机制、高质量的综合服务、高效率、高效益等方面做了深入的分析与思考，总结出广东同行走在全国前列的原因和成功的经验，同时也指出我们的差距和在市场经济竞争中潜在的生存危险。     

二次时效对微合金化的Al-Cu-Li 微观组织及力学性能的影响

通过常规力学性能、扫描电镜、透射电镜等测试分析方法研究了T8I6二次时效制度对Mg、Ag和Zn复合微合金化的Al-3.48Cu-1.44Li合金微观组织和力学性能的影响.结果表明,与单级时效相比,二次时效合金强度提高,而塑性略降;合金强度随第三级时效时间的延长进一步提高.最优的合金其抗拉强度(UTS)、屈服强度(YS)和延伸率分别为613.7、564.9 MPa和6.8％.合金的强化相主要为T1相,另有少量的θ'相和S'相.二次时效促进强化相,特别是T1相的二次沉淀,提高合金的强度,同时几乎不损失塑性.     

POSS 催化剂改性氰酸酯复合材料的性能

通过POSS 催化剂改性氰酸酯树脂,并采用热熔法排布制备了碳纤维/ 中温固化氰酸酯预浸料, 验证了改性氰酸酯的工艺性。同时考察了氰酸酯树脂及其复合材料的性能。结果表明, POSS 催化剂的加入, 降低了氰酸酯的固化温度,同时其使用温度、室温及-18℃的储存性能和复合材料力学性能与改性前相当。     

2. 5D 衍生结构SiO2 f / SiO2 复合材料的经向力学性能

以几种不同的2.5D衍生结构织物为增强体,制备了法向增强、经向增强及经法向增强2.5D Si O2f/Si O2复合材料,比较了上述材料与现有2.5D Si O2f/Si O2复合材料的经向力学性能,并研究了经法向增强2.5D结构复合材料中增强纱比例、纤维体积分数与材料性能之间的关系,对织物结构进行了优化。结果表明,经法向增强2.5D Si O2f/Si O2复合材料的经向力学性能较现有2.5D复合材料有显著提高,该材料在较低密度下(1.6 g/cm3),经向拉伸强度与现有材料(1.65 g/cm3)持平,且经向压缩强度接近现有材料的4.3倍。     

某型导弹控制舱壳体机械加工技术研究

结合生产实践介绍了新一代导弹的重要构件－控制舱壳体机械加工的难点及其工艺总方案的确定，并着重就控制铝合金乐于壁壳体的变形、提高偏心圆加工精度的措施进行了细致的研究，实践证明，该种工艺方法简单、合理，可以为类似的复杂舱体加工提供一条可借鉴的工艺途径。     

Applications of structural efficiency assessment method on structural-mechanical characteristics integrated design in aero-engines

In the design process of advanced aero-engines, it is necessary to carry out an effective analysis method between structural features and mechanical characteristics for a better structural optimization. Based on the structural composition and functions of aero-engines, the concept and contents of structural efficiency can reflect the relation between structural features and mechanical characteristics. In order to achieve the integrated design of structural and mechanical characteristics, one quantitative analysis method called Structural Efficiency Assessment Method (SEAM) was put forward. The structural efficiency coefficient was obtained by synthesizing the parameters to quantitatively evaluate the aero-engine structure design level. Parameterization method to evaluate structural design quality was realized. After analyzing the structural features of an actual dual-rotor system in typical high bypass ratio turbofan engines, the mechanical characteristics and structural efficiency coefficient were calculated. Structural efficiency coefficient of high-pressure rotor (0.43) is higher than that of low-pressure rotor (0.29), which directly shows the performance of the former is better, there is room for improvement in structural design of the low-pressure rotor. Thus the direction of structural optimization was pointed out. The applications of SEAM shows that the method is operational and effective in the evaluation and improvement of structural design.     

Multiscale eigenelement method for periodical composites: A review

Based on the eigenvector expansion idea, the Multiscale Eigenelement Method (MEM) was proposed by the author and co-workers. MEM satisfies two equivalent conditions, one condition is the equivalence of strain energy, and the other is the deformation similarity. These two equivalent conditions character the structure-preserving property of a multiscale analysis method. The equivalence of strain energy is necessary for achieving accurate macro behaviors such as lower order frequencies, while the deformation similarity is essential for predicting accurate micro behaviors such as stresses. The MEM has become a powerful multiscale method for the analysis of composite structures because of its high accuracy and efficiency. In this paper, the research advances of MEM are reviewed and all types of eigenelement methods are compared, focusing on superiorities and deficiencies from practical viewpoint. It is concluded that the eigenelement methods with smooth shape functions are more suitable for the analysis of macro behaviors such as lower order frequencies, and the eigenelement methods with piecewise shape functions are suitable for the analysis of both macro and micro behaviors.     

A drilling tool design and in situ identification of planetary regolith mechanical parameters

The physical and mechanical properties as well as the heat flux of regolith are critical evidence in the study of planetary origin and evolution. Moreover, the mechanical properties of planetary regolith have great value for guiding future human planetary activities. For planetary subsurface exploration, an inchworm boring robot (IBR) has been proposed to penetrate the regolith, and the mechanical properties of the regolith are expected to be simultaneously investigated during the penetration process using the drilling tool on the IBR. This paper provides a preliminary study of an in situ method for measuring planetary regolith mechanical parameters using a drilling tool on a test bed. A conical-screw drilling tool was designed, and its drilling load characteristics were experimentally analyzed. Based on the drilling tool-regolith interaction model, two identification methods for determining the planetary regolith bearing and shearing parameters are proposed. The bearing and shearing parameters of lunar regolith simulant were successfully determined according to the pressure-sinkage tests and shear tests conducted on the test bed. The effects of the operating parameters on the identification results were also analyzed. The results indicate a feasible scheme for future planetary subsurface exploration.     

固体火箭发动机专用ICT机械扫描系统

以成熟的组合精密镗床为本体, 研制了固体发动机专用ＩＣＴ机械扫描系统。采用４５０ ｋＶ Ｘ射线源, 设计了准直器系统、探测器系统、机械扫描系统（传动控制系统、夹具及同步台）, 实测证明扫描系统符合精度要求