M40/环氧648准各向同性层板力学性能分析

以M40石墨纤维为增强材料与环氧648-三氟化硼单乙胺为树脂基体材料组成的M40/环氧648复合材料,已成为我国应用卫星结构的主要材料之一。文中通过对其单向板工程常数测定,着重对M40/环氧648准各向同性层板的力学性能进行了分析和讨论。     

邓小平关于加强全民法制观念的思考

邓小平依法治国的思想对全民法制观念的提高提出了要求，实施政治体制改革，依治惩治腐败的思想，为全民法制观念的提高提出了合理的制度前提，市场经济体制的建立使全民法制观念的提高成为客观必要。     

影响碳化硅基复合材料机械性能的工艺因素

介绍了纤维及预制体成型、高温处理、界面技术、基体致密化及后处理等工艺因素对碳化硅基复合材料机械性能的影响。基体密化工艺是影响复膈材料性能最为主要的因素,化学气相渗透工艺制备的碳化硅基复合材料的强度和韧性明显高于其它工艺制备的复合材料,预制体高温处理可提高纤维在基体复合材料及使用过程中的高温稳定性,减少纤维／基体界面的热应力,但高温处理会引起纤维强度大幅度下降,在高温处理前先进行中间相涂层处理,不仅     

Influences of pre-torsion deformation on microstructure and mechanical properties of pure titanium subjected to subsequent tension deformation

A series of experimental studies was carried out to investigate the influences of pre-torsion on microstructure evolution, mechanical properties, and fracture appearance of pure titanium subjected to subsequent tension deformation. An introduction of pre-torsion strain can improve the materials’ mechanical properties through micro hardness evaluation. That is, the micro hardness of tensile samples with pre-torsion deformation is much higher than that of samples processed by single torsion or tension. It can be seen from the microstructure that pre-torsion deformation can be used to refine grains better and control grains’ morphology by combining subsequent tension. The results indicate that the grains are refined most evidently for tensile samples with 2 turn pre-torsion deformation. Moreover, fracture analysis indicates that tensile samples with pre-torsion strain can present good comprehensive performance. In conclusion, pre-torsion deformation plays an important role in improving comprehensive performance and controlling microstructure evolution on pure titanium subjected to later tension deformation.     

Experimental study of partially-cured Z-pins reinforced foam core composites：K-Cor sandwich structures

This paper presents an experimental study of a novel K-Cor sandwich structure rein- forced with partially-cured Z-pins. The influence of pultrusion processing parameters on Z-pins characteristics was studied and the effect of Z-pins on mechanical properties was disclosed. Differential scanning calorimetry （DSC） and optical microscopy （OM） methods were employed to determine the curing degree of as-prepared Z-pins and observe the implanted Z-pins in the K-Cor structure. These partially-cured Z-pins were treated with a stronger bonding link between face sheets and the foam core by means of a hot-press process, thereby decreasing burrs and cracking defects when the Z-pins were implanted into the Rohacell foam core. The results of the out-of-plane tensile tests and the climbing drum peel （CDP） tests showed that K-Cor structures exhibited superior mechanical performance as compared to X-Cor and blank foam core. The observed results of failure modes revealed that an effective bonding link between the foam core and face sheets that was provided from partially-cured Z-pins contributed to the enhanced mechan- ical performances of K-Cor sandwich structures.     

微机集散控制上位机通用监控软件的设计与实现

介绍了一种以模块化结构，面向多对象的微机集散控制上位通用监控软件的设计思想，主要功能和实现方法，以及实际应用效果。     

结构振动分析中的连接子结构

连接元和连接子结构与模态综合技术相结合,能够解决部件间连接比较薄弱、变形不连续结构系统的振动分析问题,子结构间的耦合变换非常简单,连接子结构的刚度系数可用参数识别的方法获取。计算和试验结果表明,这种结构连接方法能达到足够的精度,计算量也较小。     

Resistance welding of glass fiber reinforced thermoplastic composite: Experimental investigation and process parameter optimization

The utilization of fiber reinforced thermoplastics (FRTP) is expected to fulfill lightweight demand in mass-produced aerospace products. Facing the unavoidable assembly of FRTP parts, fusion bonding methods such as resistance welding are promising compared with mechanical joint and adhesive bonding. In this paper, a procedure has been brought out to understand the relationship between processing conditions and performance of the FRTP welding joints. The adherends were continuous glass fiber reinforced polypropylene (GF/PP) laminates fabricated by hot-pressing method. The influences of time, current and pressure on the bending strength of the resistance welding joints were investigated. A processing window was drawn based on the optical observation of welded surfaces. The quantitative relationship between process parameters and mechanical property of GF/PP welding joint was established by Response Surface Method (RSM) with high accuracy. It was found that bending strength of GF/PP welding joint was improved by 31% compared with hot-pressing benchmark.     

SiC/SiC复合材料氧化退化研究进展

针对高速推进系统温度测量传感器的设计方法、测量误差等核心问题,综述了现阶段高速推进系统接触式和非接触式温度测量的方法。其中,重点综述了辐射与红外测量、可调谐二极管激光吸收光谱(TDLAS)、相干反斯托克斯拉曼散射(CARS)及温度敏感涂料(TSP)等非接触温度测量技术在高速推进系统应用的研究进展和发展趋势,并分析了上述温度测量技术存在的问题。     

δ0.05mm薄钢带力学性能测试方法研究

研究了拉伸速率、试样类型、试样表面状态对δ0.05mm薄钢带力学性能测试的影响,通过数据对比,结果表明：拉伸速率对薄钢带的力学性能测试结果影响并不大,而试样的类型和试样的表面状态对力学性能测试结果有很大的影响;表面无缺陷的哑铃型试样可以满足检测要求,提高钢带检验一次合格率。