太赫兹火星大气临边探测仿真研究

对火星大气进行连续高分辨率观测是研究火星大气物理和化学过程的重要手段.太赫兹临边探测技术通过测量火星大气中的风和光化学循环中的重要气体（CO,O₃,H₂O,H₂O₂等）提高对火星的认知.针对火星大气遥感的探测需求,分析了300～1000GHz频段的频谱特征.针对探测卫星对于载荷质量、功耗等参数的要求,提出一个560GHz频段的火星大气太赫兹临边探测仪设计方案,并利用辐射传输模型ARTS中的行星工具箱进行仿真.仿真结果显示：火星大气温度的反演精度优于4K,其中45km高度以下优于2K;H₂O丰度的反演精度在90km以下优于50%,30km以下优于2%;H₂O₂的反演精度在40km以下优于50%;O₃的反演精度在50km以下优于60%;大气风速度的反演精度在65km以上优于5m·s^-1,最高可以达到2m·s^-1.研究结果表明,利用太赫兹波段的吸收谱线可以很好地探测火星大气中各成分的丰度、变化趋势以及中高层大气的风,可为后续火星表面及大气探测提供参考.     

电离层不规则结构对GPS性能的影响

电离层不规则结构的存在可引起无线电信号的幅度和相位发生随机起伏, 这 种电离层闪烁现象会影响全球定位系统(Global Positioning System, GPS)的 性能, 降低定位精度, 严重时导致信号失锁. 电离层不规则结构对GPS性能的 影响涉及电离层物理、接收机设计和表征卫星几何分布的精度衰减因子(Dilution of Positioning, DOP)等多方面因素. 本文通过对表征电离层不规则结构参数 的分析, 根据GPS接收机跟踪环路和闪烁信号模型, 综合研究了电离层闪烁对 GPS接收机载波跟踪环和码跟踪环跟踪误差的影响; 结合实际观测, 评述 了电离层不规则结构对单频和双频GPS接收机定位性能的影响, 在此基础上 提出了有待深入研究的问题及具体建议.     

A new target tracking filter based on deep learning

At present, current filters can basically solve the filtering problem in target tracking, but there are still many problems such as too many filtering variants, too many filtering forms, loosely coupled with the target motion model, and so on. To solve the above problems, we carry out crossapplication research of artificial intelligence theory and methods in the field of tracking filters. We firstly analyze the computation graphs of typical a-β and Kalman. Through analysis, it is concluded that ...     

和差通道相位差对差模跟踪接收机的影响分析

在数据中继卫星系统中,中低轨航天器常采用差模跟踪技术,完成对数据中继卫星的捕获跟踪,建立高速数据中继传输链路。文章根据某任务跟踪接收机实际设计参数,用Matlab／Simulink软件对和差通道相位差对跟踪性能的影响进行了仿真分析。     

Effect of mixing section configurations on combustion efflciency of Mg-CO2 Martian ramjet

Experiments were conducted to determine the effects of the mixing section configurations on the Mg-CO₂ Martian ramjet combustion efficiency. It was carried out at a mainstream mass flow rate of 110 g/s and a temperature of 810 K. The chamber pressure was measured under different configurations and Oxidizer to Fuel(O/F) ratios. Results showed that the engine achieved self-sustaining combustion and worked stably during experiments. The pre-combustion chamber is needed to increase the co...     

基于等离子体磁壳的行星探测器制动机理研究

等离子体磁壳制动技术是一种新型的行星探测器制动手段，具有制动阻力可调、可靠性高、结构质量小等优势，具有潜在的应用前景。开展了等离子体磁壳制动产生方式与工作机理的数值仿真研究。首先，以火星探测器的制动为背景，将等离子体磁壳简化为圆柱构型，建立了等离子体磁壳宏观模型，得到了制动阻力、有效捕获面积和探测器速度随轨道高度的变化关系。随后以等离子体磁壳中离子、电子和次中性粒子之间的相互作用为研究对象，建立了等离子体磁壳微观模型，获得了等离子体粒子数密度和温度随时间变化的规律。微观模型与宏观模型计算出的制动阻力一致，验证了两种模型的有效性。     

Comparison study of ductile iron produced with Martian regolith harvested iron from ionic liquids and Bosch byproduct carbon for in-situ resource utilization versus commercially available 65-45-12 ductile iron

As researchers continue to study methods to facilitate long-term missions beyond low-Earth orbit, the ability to manufacture high-quality mechanical and structural components on the Lunar and Martian surfaces remains a crucial piece to the puzzle for a sustained presence. Due to the immense cost of sending supplies to extraterrestrial bodies, in-situ resource utilization (ISRU) methods are critical for the success and feasibility of these habitation missions. Ionic liquids (ILs) are currently being studied at NASA’s Marshall Space Flight Center (MSFC) to harvest elemental metals from meteorites and regolith minerals. Additionally, the Bosch process is being explored as a life support system at MSFC for oxygen (O₂) regeneration, rendering a byproduct of elemental carbon (C). In this investigation, the viability of casting ductile iron (DI) using IL-sourced iron (IL-Fe) and Bosch C was studied given the range of applications and performance of DI as an as-cast alloy. Ingots were produced using commercial elements to simulate the use of IL-Fe with C sourced from the byproduct C of the Bosch process. Samples were cast and compared to commercially available 65–45-12 DI with phase transformation diagrams, microstructures, and hardness. Results showed that IL-sourced elements are a viable source of elemental alloying materials for a range of DI alloys, with some limitations.     

Adaptive vector field based accurate homing control of aerial delivery systems

This paper investigates the homing control problem of a flexible aerial delivery system with external wind, at-mospheric turbulence, and aerodynamic uncertainties. An accurate homing control strategy is presented, consisting of a trajectory generation algorithm and a lateral tracking controller. A high-altitude trajectory generation is de-veloped with system characteristics explicitly considered to generate the desired trajectory for the aerial delivery control system design. It significantly compensates for the altitude deviation of the existing multiphase theory based trajectory generation methodologies. A novel adaptive vector field control law is then designed to accom-plish the lateral tracking maneuvers. The key feature of the proposed method is that the complete lateral closed-loop control, including position and heading angle loops, is achieved in the presence of disturbances and dynamic uncertainties. The homing control with high landing accuracy is therefore achieved. Simulation and hardware-in-loop testing results are finally presented to validate the proposed method’s effectiveness compared to a conventional homing control scheme.     

Martian Buildings: Design loading

Multiplanetary life has been studied by scientists as a way to supply energy or sustain human life in the future. Mars is likely to be man’s first destination, colonization using onsite structural construction would be one of the main options. The first step to designing a reliable building is to know the applied structural loads and to have an accurate design load combination. Due to lack of complete knowledge, short span of recorded data, Martian environment, and hazardous environment that Martian structures face, constructed Martian structures should behave appropriately under the highest likely live, dead and environmental loads either simultaneously or as a worst-case scenario. The present study evaluated and calculated probable Martian structural loads, including live, internal pressure, snow, gravity (dead), dust accumulation, thermal stress, wind, marsquake, asteroid, and meteoroid impact loads and their effects. Information was gathered from previous studies and valid data from Martian landers, rovers and orbiters. Wind loads were calculated based on the over 6.5 years of data recorded by Vikings 1 and 2, temperature and winds for InSight (TWINS) sensor. A wind shear exponent and wind profile have been proposed for a Martian flat terrain construction site. Marsquake lateral loads, frequency content and seismicity were assessed using data from the seismic experiment for interior structure (SEIS) and the Viking 2 seismometer. Considering the high influx of micrometeoroids, their penetration distance, impact loads and their effects on structures were calculated. The annual probability of an asteroid impact on a settlement was assessed for a 30-year mission. A load map for Martian residential buildings that considers the worst-case scenario in which a Martian structure should be designed based on them has been proposed.     

动态负调约束下固体冲压发动机燃气流量控制算法研究

变流量固体冲压发动机工作过程中，常采用控制燃气发生器压强的方式调节燃气生成量，在跟踪变化压强指令过程中，流量会产生明显的负调现象，严重影响发动机系统的安全性和可靠性。为 解决这一问题，本文以具有高度非线性、强时变特性的燃气发生器系统为对象，构建了基于粒子群算法的流量调节自适应PI控制器，并给出一种利用自适应微分跟踪器对期望控制指令进行“整形”的负调改善算法；首先，结合负调发生、终止判据，综合考量系统流量安全裕度，负调发生方向，构建了适配于动态负调约束的自适应跟踪微分器（TD），克服了传统跟踪微分器在负调抑制过程中控制精度不高，指向性不强等缺陷；进一步，开展了多工况下的负调抑制算法仿真校验，结果表明：所设计自适应控制算法具备良好的燃气流量控制能力，可实现在基本不改变响应时间情况下，将最大负调量削减56.6%的控制效果，展现出良好的工程应用前景。