基于有限单元热网络法的航空发动机主轴轴承热分析

航空发动机主轴轴承温度场的精准预测对保证发动机润滑系统及整机稳定运转至关重要.针对传统热网络法精度低的问题,提出一种基于有限单元思想的有限单元热网络法.将轴承结构通过网格划分为有限个单元体,每个单元体设置一个温度节点代表该单元体的集总参数,节点间构建热阻关系并形成热网络,通过求解以温度为未知量的大型稀疏矩阵线性方程组来...     

运动的核弹比静止的核弹威力小?——多普勒效应、红移、光行差和动体的质能当量关系

证明爱因斯坦立足于光速不变假设和长度收缩假设的洛伦茨变换未能正确地解释多普勒效应、红移和光行差现象;他也未能给出正确的动体的质能当量关系.作者立足于完全符合相对性原理的伽利略变换,成功地解决了上述问题.     

椭球台高杆灯风荷载的实验研究

通过风洞实验研究了多钝体高杆灯在不同水平风向角和竖向风向角下的力与力矩系数。实验结果表明在一定的风向角下，法向阻力系数Cdmax=1.030,法向弯曲力矩系数Cmmax=-0.940,轴向力系数Camax=0.504和Camin=-0．600。     

Dynamics of a spacecraft and normalization around Lagrangian points in the Neptune–Triton system

The problem of a spacecraft orbiting the Neptune–Triton system is presented. The new ingredients in this restricted three body problem are the Neptune oblateness and the high inclined and retrograde motion of Triton. First we present some interesting simulations showing the role played by the oblateness on a Neptune’s satellite, disturbed by Triton. We also give an extensive numerical exploration in the case when the spacecraft orbits Triton, considering Sun, Neptune and its planetary oblateness as disturbers. In the plane a × I (a = semi-major axis, I = inclination), we give a plot of the stable regions where the massless body can survive for thousand of years. Retrograde and direct orbits were considered and as usual, the region of stability is much more significant for the case of direct orbit of the spacecraft (Triton’s orbit is retrograde). Next we explore the dynamics in a vicinity of the Lagrangian points. The Birkhoff normalization is constructed around L₂, followed by its reduction to the center manifold. In this reduced dynamics, a convenient Poincaré section shows the interplay of the Lyapunov and halo periodic orbits, Lissajous and quasi-halo tori as well as the stable and unstable manifolds of the planar Lyapunov orbit. To show the effect of the oblateness, the planar Lyapunov family emanating from the Lagrangian points and three-dimensional halo orbits are obtained by the numerical continuation method.     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

人体热调节的有限元分析

本文根据人体的热调节机制建立了二维人体热调节的有限元模型，并设计了相应的实验对该模型进行了验证，实验结果与计算结果吻合较好，本模型对于以人体－环境热交换为内容的工程实践和理论研究有较高的应用价值。     

RECENT PROGRESS IN THE PROJECT OF SPACE SOLAR TELESCOPE

In this paper, we introduce some process of the project of Space Solar Telescope in recent two years. The astronomic requirements have been further identified,the mission and operation requirements have been assessed, and some critical technologies have been performed. According to the time schedule, it is esti mated that the engineering model of the spacecraft would be completed and put into test operation in the end of 2004 and the spacecraft would be launched in about 2007.     

超声速平面钝体流动的快速解法

本文介绍了一种平面流动的快速欧拉方程解法。该方法将原参数非定常欧拉方程组重新组合成以广义称曼变量表示的欧拉方程组，再用二点二步迎风格式离散解。针对钝体流动，本文先建立了动网格下的方程，构造了动网格下的算法。提出了一种简单的激波处理方法。计算结果表明，该方法速度快，稳定性好，对初场不敏感。     

小型弹体转动惯量的测定

阐述了对称式三线摆的结构原理及该摆微角与大角摆动周期的计算方法 ,利用此摆可以测量构件的转动惯量。当 RL <130 、φ0 <6 0°时 ,该装置的测量准确度优于 1%。     

整体壳段典型特征高效模块化编程技术

整体壳段为航天产品核心零部件，具有结构复杂、尺寸精度高、材料去除率大、工艺过程复杂、加工周期长等特点。在壳段数控加工过程中，存在编程难度大、重复工作量大、效率低及编程质量与编程人员能力水平密切相关等问题。为了适应高效、高可靠性的任务需求，依托成熟商用CAM软件，通过对整体壳段典型特征的分析，基于UG NX软件平台研究并开发了典型特征自动化编程模块，有效提高了加工程序的质量稳定性，并极大降低了工艺人员的编程操作量，提高了工艺设计效率。