挤压式磁流变弹性体阻尼器-转子系统的振动特性试验

 磁流变(MR)弹性体是一种由铁磁颗粒和橡胶或凝胶混合而成的磁流变固体材料,其明显优点是颗粒不会随时间而沉降,也不需要密封装置。研制了一种自定心挤压式磁流变弹性体阻尼器,并测试了支承在该阻尼器上的柔性转子系统的不平衡响应特性。试验发现,随着磁场强度增加,磁流变弹性体阻尼器的阻尼和刚度明显增大;转子系统的一阶临界转速明显提高,二阶临界振动可被抑制。采用开关控制能抑制转子通过两阶临界转速过程中的振动。研究表明,挤压式磁流变弹性体阻尼器能用于转子振动主动控制,并具有结构简单、性能稳定、控振效果明显等特点。     

Rotordynamic characteristics prediction for scallop damper seals using computational fluid dynamics

Enhancing damping characteristic is one of the effective methods to solve the instability problem of the rotor system. The three-dimensional numerical analysis model of scallop damper seal was established, and the effects of inlet pressures, preswirl ratios, rotational speeds, interlaced angles and seal cavity depths on the rotordynamic characteristics of scallop damper seal were studied based on dynamic mesh method and multi-frequencies elliptic whirling model. Results show that the direct stiffness of the scallop damper seal increases with decreasing inlet pressure and increasing rotational speed and cavity depth. When the seal cavity is interlaced by a certain angle, which shows positive direct stiffness. The effective damping of the scallop damper seal increases with the increasing inlet pressure, the decreasing preswirl ratio and the rotational speed and cavity depth. There exists an optimal interlaced angle to maximize the effective damping and the system stability. The leakage of the scallop damper seal is significantly reduced with decreasing inlet pressure. The preswirl will reduce the leakage flowrate, and the rotational speed has a slight effect on the leakage performance. The leakage of the scallop damper seal decreases with increasing seal cavity depth.     

冲击/周期载荷作用下分布式调谐质量阻尼器对响应控制的影响

本文研究了采用分布式调谐质量阻尼器(TMD)对悬臂梁进行振动抑制的问题.首先建立了安装N个TMD的悬臂梁的动力学方程;然后通过有限单元法离散偏微分方程,使用Newmark-β法进行含TMD的悬臂梁动响应求解;最后基于数值计算模型,分别研究周期荷载与冲击荷载作用下,梁振动控制的效果.研究表明:TMD可以有效抑制悬臂梁振动...     

Pressure performance for a thin-walled ring and turbulent-jet orifice modeled elastic squeeze film damper

This paper explores an analytical model for Elastic Ring Squeeze Film Damper (ERSFD) with thin-walled ring and turbulent-jet orifices, and uncovers its Oil Film Pressure Performance (OFPP). Firstly, the ring deformation is addressed by using the Fourier series expansion approach and the orifice outflow rate is characterized with the Prandtl boundary layer theory. Secondly, applying finite difference scheme, the influence of elastic ring flexibility, orifice diameter, and attitude angle on the OFPP is analyzed. Finally, Outer chamber pressure was measured experimentally at different rotor speeds. The results indicate that the outer chamber pressure coats an individual load-carrying region and spreads symmetrically pertaining to the attitude angle. Its amplitude drops as the elastic ring flexibility decreases but boosts with the reduction of the orifice diameter. For inner chamber pressure, the orifice diameter effects a similar trend to the outer cavity, but exhibits more stable distribution regarding the attitude angle. Minimizing the elastic ring flexibility causes an increase in amplitude. The model is validated by the test results giving that the outer chamber pressure shifts synchronously and periodically with the variation of the attitude angle, while the pressure amplitude increases slightly at higher rotor speeds.