Variation in the ionospheric propagating factor M(3000)F2 at Ouagadougou,Burkina Faso

We use hourly monthly median values of propagation factor M(3000)F2 data observed at Ouagadougou Ionospheric Observatory (geographic12.4°N, 1.5°W; 5.9^o dip), Burkina Faso (West Africa) during the years Januar1987–December1988 (average F10.7 < 130 × 10⁻²² W/m²/Hz, representative of low solar flux conditions) and for January 1989–December1990 (average F10.7 ? 130 × 10⁻²² W/m²/Hz, representative of high solar epoch) for magnetically quiet conditions to describe local time, seasonal and solar cycle variations of equatorial ionospheric propagation factor M(3000)F2 in the African region. We show that that seasonal trend between solar maximum and solar minimum curves display simple patterns for all seasons and exhibits reasonable disparity with root mean square error (RMSE) of about 0.31, 0.29 and 0.26 for December solstice, June solstice and equinox, respectively. Variability Σ defined by the percentage ratio of the absolute standard deviation to the mean indicates significant dissimilarity for the two solar flux levels. Solar maximum day (10–14 LT) and night (22–02 LT) values show considerable variations than the solar minimum day and night values. We compare our observations with those of the IRI 2007 to validate the prediction capacity of the empirical model. We find that the IRI model tends to underestimate and overestimate the observed values of M(3000)F2, in particular, during June solstice season. There are large discrepancies, mainly during high solar flux equinox and December solstice between dawn and local midnight. On the other hand, IRI provides a slightly better predictions for M(3000)F2 between 0900 and 1500 LT during equinox low and high solar activity and equinox high sunspot number. Our data are of great importance in the area of short-wave telecommunication and ionospheric modeling.     

高强度钢Domex700MCD焊接性能研究

分析了Domex700MCD焊接性,并通过试验及数据分析表明,在焊接工艺中,采用混合气体保护焊、低合金结构钢焊丝ER69-3,通过控制焊接线能量,运用合理的焊接规范,可获得良好的焊缝机械性能。     

国外新型热作模具钢及其热处理工艺

主要叙述了H13、QRO80M、QRO90SUPREME等新型热作模具钢的性能、使用特点及其热处理工艺技术方法。     

M40/4211 复合材料层合板铣削加工试验

通过分析碳纤维复合材料的性能特点及对切削加工性能的影响,提出了铣削刀具材料和几何结构形式的选用原则,介绍了几种适于碳纤维复合材料铣削的加工刀具。针对碳纤维复合材料中常用的M40/4211复合材料层合板进行加工缺陷试验和切削试验,总结出影响M40/4211复合材料层合板加工质量的因素及规律,得到每种刀具加工M40/4211复合材料层合板的最佳加工参数,较高的切削速度配合恰当的进给速度可以有效提高M40/4211复合材料层合板的加工质量和加工效率。     

轻型塔架挠度速算法

本文介绍了轻型塔架的挠度速算法,并以三角形截面的钢塔架为例题作了计算公式推导。这种方法具有计算简单和具有足够精度的优点。     

GD钢贝氏体相变动力学研究

利用Ｆｏｒｍａｓｔｏｒ－Ｆ全自动相变仪对ＧＤ钢贝氏体相变动力学进行了系统的研究。结果表明,ＧＤ钢贝氏体等温转变相变动力学曲线可以用Ｊｏｈｎｓｏｎ－Ｍｅｈｌ型方程精确地加以描述。根据贝氏体相变的总激活能判断,试验钢上、下贝氏体相变的过渡温度约为２８５℃。     

300M钢制内螺纹冷挤压研究

研究300M超高强度钢内螺纹的冷挤压成形以及工件预制底孔直径、冷却润滑液等因素对其内螺纹挤压成形的影响;对挤压螺纹轴截面上的显微硬度进行了测试,并对显微硬度的特征进行了详细分析,与45钢进行对比以此来表征挤压强化效果。     

切削工具材料的发展综述

具体介绍切削工具材料如高速钢、硬质合金、陶瓷、金属陶瓷、刀具涂层技术、超硬材料的演变和进展。     

淬火制度对16NiCo钢组织性能的影响

研究了淬火温度及冷却方式对１６ＮｉＣｏ钢微观组织和性能的影响，结果表明：该钢不同温度淬火风冷与油冷后，随淬火温度的提高，性能变化趋势相近，强度至８００℃～８３０℃达最大值，而后开始降低，８６０℃淬火冲击韧性为最高。８６０℃油淬与８３０℃风冷相比，强度下降不多，冲击韧性提高幅度比较大，并且随淬火温度的增加，两个强度指标之间的差别越来越大。     

S-08钢真空熔模精密铸造工艺研究

通过工艺试验和系统分析,研究出一套用真空感应铸造炉生产S-08钢铸件的工艺方法,解决S—08钢真空熔模精密铸造过程中的关键工艺技术问题,使S-08钢铸造的液氧／煤油发动机低压壳体、氧主阀下壳体等关键铸件满足高压、高冲击的负荷指标。