A new global version of M(3000)F2 prediction model based on artificial neural networks

A new version of global empirical model for the ionospheric propagation factor, M(3000)F2 prediction is presented. Artificial neural network (ANN) technique was employed by considering the relevant geophysical input parameters which are known to influence the M(3000)F2 parameter. This new version is an update to the previous neural network based M(3000)F2 global model developed by Oyeyemi et al. (2007), and aims to address the inadequacy of the International Reference Ionosphere (IRI) M(3000)F2 model (the International Radio Consultative Committee (CCIR) M(3000)F2 model). The M(3000)F2 has been found to be relatively inaccurate in representing the diurnal structure of the low latitude region and the equatorial ionosphere. In particular, the existing hmF2 IRI model is unable to reproduce the sharp post-sunset drop in M(3000)F2 values, which correspond to a sharp post-sunset peak in the peak height of the F2 layer, hmF2. Data from 80 ionospheric stations globally, including a good number of stations in the low latitude region were considered for this work. M(3000)F2 hourly values from 1987 to 2008, spanning all periods of low and high solar activity were used for model development and verification process. The ability of the new model to predict the M(3000)F2 parameter especially in the low latitude and equatorial regions, which is known to be problematic for the existing IRI model is demonstrated.     

有机高分子絮凝剂处理高浊度原水效果和机理研究

本文研究了有机高分子絮凝剂ＰＡＭ、ＣＴＡＢ及它们的复配ＰＡＭ＋ＣＴＡＢ处理高浊度原水的最佳实验条件、絮凝性能、效果和机理，为有机高分子絮凝剂的选择和管式絮凝器的研制提供了理论依据。     

位移序列多进制扩频通信方式

提出用 m序列的位移序列做扩频序列的多进制扩频通信方式 ,并给出了它的系统模型 ,分析了它的通信性能。理论分析证明 ,用 m序列的位移序列构成的多进制扩频通信方式具有很高的通信有效性和通信可靠性     

航天器舷窗玻璃超高速撞击损伤与M/OD撞击风险评估

用北京卫星环境工程研究所的18mm口径二级轻气炮(TLGG)和20 J激光驱动微小飞片装置(LDFF-20)对用作航天器舷窗玻璃的熔融石英玻璃的超高速撞击损伤特性进行了实验研究和分析.其中,TLGG发射的球形铝弹丸直径分别为1 mm和3 mm,速度2～6.5 km/s;LDFF-20发射的圆柱形飞片厚度7 μm,直径1 mm,速度1～8.3 km/s.撞击结果为:对12 mm厚的熔融石英玻璃,直径为3mm的弹丸甚至在2.8 km/s的低速下就将其穿透,而直径为1 mm的弹丸在6.5km/s的高速下没有穿透,这说明弹丸直径对撞击损伤特性有很强的影响;LDFF-20发射的微小飞片的撞击仅在玻璃表面产生很浅的凹坑,没有裂纹产生,但微小飞片的累积撞击损伤明显地降低了玻璃的透光性.实验初步获得了侵彻深度PC、侵彻直径D1与弹丸撞击速度Vp、弹丸质量Mp之间的经验关系.依据实验结果和目前的微流星体/空间碎片(M/OD)环境工程模型,建议对于高度为400 km、轨道倾角42°、寿命为3年的典型航天器,其舷窗玻璃的临界安全(非穿透)厚度至少为12mm.     

微电子封装技术及发展趋势综述

随着电子产品小型化、高集成度的发展趋势,电子产品的封装技术正逐步迈入微电子封装时代。本文对微电子封装的关键技术进行了介绍,介绍了芯片互连工艺、典型封装技术和MCM技术。同时,本文对微电子封装技术的发展趋势及应用前景进行了综述。     

Variation in the ionospheric propagating factor M(3000)F2 at Ouagadougou,Burkina Faso

We use hourly monthly median values of propagation factor M(3000)F2 data observed at Ouagadougou Ionospheric Observatory (geographic12.4°N, 1.5°W; 5.9^o dip), Burkina Faso (West Africa) during the years Januar1987–December1988 (average F10.7 < 130 × 10⁻²² W/m²/Hz, representative of low solar flux conditions) and for January 1989–December1990 (average F10.7 ? 130 × 10⁻²² W/m²/Hz, representative of high solar epoch) for magnetically quiet conditions to describe local time, seasonal and solar cycle variations of equatorial ionospheric propagation factor M(3000)F2 in the African region. We show that that seasonal trend between solar maximum and solar minimum curves display simple patterns for all seasons and exhibits reasonable disparity with root mean square error (RMSE) of about 0.31, 0.29 and 0.26 for December solstice, June solstice and equinox, respectively. Variability Σ defined by the percentage ratio of the absolute standard deviation to the mean indicates significant dissimilarity for the two solar flux levels. Solar maximum day (10–14 LT) and night (22–02 LT) values show considerable variations than the solar minimum day and night values. We compare our observations with those of the IRI 2007 to validate the prediction capacity of the empirical model. We find that the IRI model tends to underestimate and overestimate the observed values of M(3000)F2, in particular, during June solstice season. There are large discrepancies, mainly during high solar flux equinox and December solstice between dawn and local midnight. On the other hand, IRI provides a slightly better predictions for M(3000)F2 between 0900 and 1500 LT during equinox low and high solar activity and equinox high sunspot number. Our data are of great importance in the area of short-wave telecommunication and ionospheric modeling.     

M40/4211 复合材料层合板铣削加工试验

通过分析碳纤维复合材料的性能特点及对切削加工性能的影响,提出了铣削刀具材料和几何结构形式的选用原则,介绍了几种适于碳纤维复合材料铣削的加工刀具。针对碳纤维复合材料中常用的M40/4211复合材料层合板进行加工缺陷试验和切削试验,总结出影响M40/4211复合材料层合板加工质量的因素及规律,得到每种刀具加工M40/4211复合材料层合板的最佳加工参数,较高的切削速度配合恰当的进给速度可以有效提高M40/4211复合材料层合板的加工质量和加工效率。     

300M超高强度钢在模拟积水环境中的腐蚀行为

 针对飞机结构部件在服役过程中存在的缝隙积水导致结构材料腐蚀的问题,通过研究腐蚀产物、形貌、失重、腐蚀速率、腐蚀损伤度以及积水溶液与暴露金属的面容比、pH值等的变化,探讨了300M超高强度钢在模拟积水环境中的腐蚀行为。结果表明,300M钢在模拟积水中的腐蚀是从点蚀开始,然后点蚀坑扩展合并,逐渐发展为全面腐蚀,其腐蚀失重和腐蚀损伤度随腐蚀时间的增加而增大,腐蚀损伤度则呈现出幂函数变化趋势;随腐蚀时间的延长,模拟积水环境中的pH值从初期的4.2升到5.2再下降到4.8～5.0,平均腐蚀速率也从0.289 g/(m²·h)线性减小到0.120 g/(m²·h);电化学交流阻抗结果表明随腐蚀时间的延长,容抗弧半径逐渐增大,说明腐蚀产物对基体起到一定的保护作用,这与腐蚀速率变化规律一致;另外,不同的面容比(腐蚀介质体积与300M钢暴露面积之比)对腐蚀过程的影响是:随面容比的增加,腐蚀失重与腐蚀速率均增大。     

常规装药近地爆炸冲击波效应数值模拟

针对现有经验公式在计算爆炸地面冲击波超压值时存在的局限,采用NND2M差分格式对TNT柱形装药在小爆高状态下的爆炸冲击波效应进行了数值模拟研究,并与试验实测值及经验公式计算值进行了比较,分析了存在差异的原因,证明了本文采用的计算是合理可靠的.     

小推力航天器的地月低能转移轨道

 在限制性四体模型下研究基于小推力方式的地月低能转移问题,通过借助于平动点轨道的相空间结构来揭示小推力转移的机理。重点研究了小推力转移自由飞行段的构造：经由LL₁点穿越获得最小能量的低能转移;而经由LL₁点Halo轨道穿越,得到(M,N)圈穿越轨道;由于Halo轨道相对于平动点增加了一维度的选择,根据(2,2)圈穿越轨道构造该转移的自由飞行段。在地球势阱逃逸和月球势阱捕获段,分别设计了合适的小推力的控制律及发动机开/关机时间,成功实施近地球段的小推力加速和近月球段的减速。尽管未对所得到的结果进行优化,所得转移轨道的燃料消耗也与类似边界条件的SMART-1轨道基本一致。