High performance two degrees of freedom attitude control for solar sails

The purpose of this paper is to present a high performance solar sail attitude controller which uses ballast masses moving inside the sail’s booms as actuators and to demonstrate its ability of performing time efficient reorientation maneuvers. The proposed controller consists of a combination of a feedforward and a feedback controller, which takes advantage of the feedforward’s fast response and the feedback’s ability of responding to unpredicted disturbances. The feedforward controller considers the attitude dynamics of the sailcraft as well as the disturbance torque due to the center of pressure offset to the center of mass of the sailcraft. Additional disturbance torques, like those coming from the environment or from asymmetry of the spacecraft structure, are then handled by the feedback controller. Simulation performance results are finally compared against results available in the literature.     

激光脉冲圈焊工艺研究与应用

基于有限元软件MSC.MARC软件平台Hypermesh软件模块仿真模拟了激光连续圈焊和激光脉冲圈焊的温度场分布,模拟结果表明:激光脉冲圈焊可有效控制被焊工件温度场分布,焊接热影响区小,为此采用激光脉冲圈焊工艺焊接簧片式电磁阀簧片组件.研究了激光焊接频率与焊点重叠率以及激光焊接速度与焊缝强度和焊点重叠率之间的关系,从而得出了激光脉冲圈焊焊接工艺规范,即激光峰值功率Pf--300 W,激光基值功率Pj=200 W,激光焊接速度v=3.33 mm/s,激光频率f=20 Hz等,采用该焊接规范焊接完成的簧片式电磁阀已经应用于嫦娥五号探测器推进分系统、轨道器子系统以及上升器推进子系统的液体动力装置之中,并已经完成了飞行和月球探测任务.     

针栓式喷注单元雾化角模型分析

为了实现不同径向孔形的针栓式喷注器雾化角的准确预测，从动量守恒方程出发建立了液膜撞击液膜和液膜撞击液束的雾化角理论修正模型。对于液膜撞击液膜的喷注单元，模型中通过理论推导引入了2个变形因子，将撞击的几何变形效应与雾化角关联；对于液膜撞击液束，通过引入阻塞率定义有效撞击动量比，同时将液束入口孔形的影响隐含考虑在变形因子中，最后根据高速摄影试验结果和数值仿真结果获得了对应的变形因子组合系数，使得新的雾化角模型适应性更广、准确性更高。结果表明：引入变形因子和阻塞率的理论模型预测值与试验及数值仿真结果吻合很好；对于液膜撞击液膜，变形因子基本维持在0.9~1.1，根据试验结果及仿真结果，变形因子推荐值为C₁=0.99和C₂=1.06；对于液膜撞击液束，变形因子推荐值为C₁=0.75和C₂=1.25。该模型根据实际出口的轴向动量和合成总动量计算雾化角，隐含考虑了撞击作用造成的影响，较根据撞击前入口的轴向动量和合成总动量计算雾化角的常用模型预测值准确度显著提高，为针栓式喷注器的理论研究和工程设计提供了重要参考。     

Charge exchange interactions on near-Earth proton radiation for orbit perturbation of high area-to-mass ratio objects

This novel concept expels neutral gas in the presence of geomagnetically-trapped protons in near-Earth orbit. The expelled neutral gas acts to induce charge exchange collisions with the geomagnetically-trapped protons and induce drag on objects which pass through it. The charge exchange collisions between the neutral gas and the geomagnetically-trapped protons create neutrals with similar kinetic energy that are not confined by the geomagnetic field. The charge exchange neutrals are able to collide with orbital objects and perturb their orbits. The delta-v applied by the charge exchange neutral flux is greatest on high area-to-mass objects. Numerical simulation shows charge exchange neutral impacts produce a delta-v on objects on the order of 3.8 x 10⁻¹¹ m/s at a distance of 1 km from the center of the expelled gas in a 1,000 km orbit. The impulse imparted by charge exchange neutral impacts is at least six orders of magnitude smaller than that provided by the induced drag caused by gas expulsion. The localized drag increase can force a majority of small objects into the orbit of the expelled gas cloud, even if that orbit is retrograde to the initial orbit of the objects. This new technique can be applied to the remediation of space debris.     

On the uncertainties in the measurement of absolute (true) TEC over Indian equatorial and low latitude sectors

The Indian sector encompasses the equatorial and low latitude regions where the ionosphere is highly dynamic and is characterized by the equatorial ionization anomaly (EIA) resulting in large latitudinal electron density gradients causing errors and uncertainties in the estimation of range delays in satellite based navigation systems. The diurnal and seasonal variations of standard deviations in the TEC data measured during the low sunspot period 2004–2005 at 10 different Indian stations located from equator to the anomaly crest region and beyond are examined and presented. The day-to-day variability in TEC is found to be lowest at the equatorial station and increases with latitude up to the crest region of EIA and decreases beyond.     

风扇出口导向叶片低噪声设计Ⅰ:方法与优化

作为"风扇出口导向叶片（Outlet Guide Vanes，OGV）低噪声设计"系列文章的第1篇，本文在现有压气机气动设计流程的基础上，加入了噪声评估过程，建立了基于通流设计的气动/声学一体化设计方法。为提高设计阶段的评估速度，以三维升力面理论与管道声学理论为基础，从通流设计和造型设计输出中提取参数，结合转子尾迹模型，建立了转/静干涉噪声的解析预测模型。以现代大涵道比涡扇发动机风扇/增压级为对象，采用该模型系统分析了OGV轴向掠形与周向倾斜对转/静干涉噪声的影响，获取了轴向掠形角与周向倾斜角等三维设计参数与风扇噪声的关系图谱，初步确定了低噪声设计较优降噪量的掠和倾组合方案。以此为基础，在保持叶尖子午投影位置和弦长不变的前提下，将叶片前缘和径向积叠进行参数化，采用遗传算法进一步开展了OGV的低噪声优化设计，最终获得了2个优化方案，预估的降噪量达到了8 dB。     

A comparative study on acoustic damping induced by half-wave, quarter-wave, and Helmholtz resonators

The damping characteristics of three-type resonators, a half-wave, a quarter-wave, and a Helmholtz resonator are studied experimentally by adopting linear acoustic test. A quantitative acoustic property of sound absorption coefficient in a model enclosure with the resonators is measured and thereby, the acoustic-damping capacity of a resonator is characterized. For a comparative study on acoustic damping, the damping capacity of a half-wave resonator is compared with that of the other resonators. A half-wave and a quarter-wave resonators have the same damping mechanism, but a quarter-wave resonator has much larger damping capacity than a half-wave resonator with the same diameter of a single resonator. It is found that shorter length of a resonator has the advantage of longer one with respect to the damping capacity. The damping capacity of a Helmholtz resonator increases with cavity volume and does as the orifice length decreases. A Helmholtz resonator has the highest damping capacity of three-type resonators and a half-wave resonator has the lowest. Besides, a Helmholtz resonator requires the smallest number of resonators for optimal damping. The design criterion of each resonator on the optimal damping is provided by the normalized parameter of open-area ratio and the similarity behavior for the optimal damping is observed for various enclosure diameters.     

小直径深孔加工技术在航空机载行业中的应用

分析总结了国内外小直径深孔加工技术后,介绍了小直径深孔加工技术在航空机载行业中的应用,及其小直径深孔加工时设备选型需注意的问题。     

外围投篮命中率的概率分析

利用几何概率的方法，解决投篮命中率问题，为将概率论应用到体育中去提供了新的思路。     

低频靶标法测量CCD相机调制传递函数的仿真

基于用高频靶标法测试调制传递函数（MTF）时不能准确地体现出CCD器件的平均采样的情况。该文探讨用低频靶标法测试MTF，介绍它的原理；通过数字仿真CCD的光学镜头的模糊和采样平均过程，分析不同频率靶标的MTF测试结果，并分析相位造成的影响。