基于灰色近似支持向量机的加速度计参数预测

温度、振动等环境载荷使得石英挠性加速度计参数产生漂移,直接影响了惯导系统的测量精度和性能,石英挠性加速度计参数变化趋势为非线性的,很难用常规的建模方法进行趋势预测。基于灰色理论适合进行小样本、贫信息不确定型系统建模以及近似支持向量机不需要求解二次规划就能求得非线性模型参数的优点,提出了基于灰色近似支持向量机进行石英挠性加速度计参数预测的方法。为了验证该方法的有效性,针对自然贮存的加速度计进行了固定周期的参数标定,结果表明灰色近似支持向量机具有很好的预测效果。     

倾转旋翼机小速度前飞的尾迹涡演化及其对平尾的影响

采用基于运动嵌套网格的CFD方法计算了倾转旋翼机直升机状态和过渡状态下的流场,研究了在小速度前飞下的尾迹涡演化和其对平尾气动力的影响。直升机状态下,前飞速度≤4 m/s时,旋翼尾迹主要在机翼附近,与机翼干扰形成喷泉效应,但对平尾无影响。随着前飞速度增大,喷泉效应与自由来流的综合作用形成喷泉涡,喷泉涡产生于机翼上表面,呈流向涡形式向下游输运,从平尾上方通过。前飞速度进一步增大（≥16 m/s）,产生于桨盘边缘的旋翼尾迹侧缘涡开始增强,从平尾侧边通过,并在平尾附近的流动中占据主导地位。喷泉涡和侧缘涡均在平尾处产生上洗流动,使平尾产生低头力矩。从直升机状态到固定翼状态,旋翼尾迹侧缘涡逐渐减弱,对平尾的影响也减弱。     

潜入式喷管喉衬界面间隙优化设计

为了解决固体火箭发动机潜入式喷管喉衬在热载荷与内压联合作用下界面间隙优化问题,数值模拟方法求解了喷管热结构响应.采用流体仿真软件,计算了潜入式喷管流动过程的稳态流场,获取了高温燃气流动参数与固体壁面对流换热系数.并采用三维有限元结构计算平台,编写了非均布壁面压力载荷与非均布对流换热系数子程序,求解了喉衬前后搭接界面间隙...     

New design simulation for a high-altitude dual-balloon system to extend lifetime and improve floating performance

This paper presents a comprehensive simulation for a high-altitude dual-balloon system which consists of zero- and super-pressure balloons. Preliminary calculations were established to describe the basic concept of the new integrated system. A mathematical model was investigated to simulate the ascending and floating processes which considered the atmospheric conditions and thermodynamic variations. Based on the simulation, results showed that the floating altitude stability between daytime and nighttime was improved. This integrated system supports higher floating altitude levels than those of ordinary balloons and extends the lifetime of floating balloon systems. Moreover, results demonstrated that the integrated system was lighter than ordinary balloons, saving useful weight for effective payload. Furthermore, exploiting the advantages of both kinds of balloons while avoiding the difficulties was a significant goal in the current design to promote the floating performance of high-altitude balloons technology.     

一种双钟型喷管液氧/甲烷发动机系统方案

根据双钟型喷管高度补偿特点及技术研究现状,提出了一种双钟型喷管液氧甲烷发动机系统方案,进行了双钟型喷管基弧段及延伸段面积比优化,并与其他系统方案进行了性能对比分析。研究表明,对于地面起动的芯级发动机,采用双钟型喷管是提高发动机综合比冲性能以及运载器有效载荷的有效途径。     

一种大面积比喷管的分段式设计与数值分析

为了满足大推力上面级发动机大面积比喷管的设计需求,采用了排放冷却前段和单壁辐射冷却尾段的分段式设计方案。在排放冷却前段传热计算的基础上,通过对内流场进行数值模拟,重点研究了单壁尾段在引入上游排放冷却气氢情况下的冷却特性和喷管效率。结果表明:对于大面积比喷管,采用带二次流的单壁金属喷管延伸段是现实可行的,有望达到较好的冷却保护效果并提高喷管效率。     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

中国深空网首次△DOR联合测轨试验分析

通过分析中国深空网首次△DOR（Delta Differential One way Ranging,双差分单向测距）联合测轨试验的干涉测量事后数据,重点从观测量随机精度、闭合时延等方面讨论了国内深空网与国内VLBI（Very Long Baseline Interferometry,甚长基线干涉测量）观测网、国内深空网与国际深空网的联合干涉处理情况,并与ESOC（European Space Operation Center,欧洲空间操作中心）数据处理结果进行了比对.试验结果表明：我国深空网已具备独立或联合开展深空探测器导航测轨的系统支持能力;深空站系统具备高速率数据接收、采集、记录、传输能力,采集数据处理精度优于1 ns;深空网干涉测量信号处理中心具备多体制信号的干涉处理分析能力,其分析精度与ESOC处理精度差异在0.1 ns量级.     

长配管、高落差空调系统的计算机仿真与试验研究

空调系统在长配管、高落差情况下其运行性能和可靠性会受到影响。建立数学模型预测长配管、高落差空调系统的性能，可以提供给用户准确的性能资料，指导用户合理安装空调器，提高产品的可靠性。     

喷管扩散段型面对固体发动机性能的影响

通过计算喷管二维两相流和边界层比冲损失,研究了喷管扩散段型面对其性能的影响。研究结果表明：在喷管扩散段长度一定的情况下,膨胀比有一最佳值,超过该值,喷管性能反而下降;在膨胀比一定的情况下,在一定长度范围内喷管越长,其性能越高。从而得出,为使综合性能达到最佳,在一定膨胀比下喷管扩散段长度应取喷管出口直径的1～1．25倍。该结论可供设计人员参考。