两凸平面相贯立体的隐藏线消去法

本文介绍了一种消去两相贯凸平面立体的隐藏线算法。首先利用外法线法单体消隐,然后用线与面比较法作组合消隐计算,逐一确定各个单体上可见棱线在组合体上的可见线段,最后显示或绘制所有的可见棱线段和两体的可见交线,得到消隐后的立体图。本法信息输入量较小,功能较强,不但适用于两相贯的凸平面立体的消隐,而且也适用于两迭加的凸平面立体的消隐。本程序还适用于两体具有共面的情况。     

基于卫星观测数据的弹道导弹初始状态估计

利用卫星探测数据对大气层外飞行的弹道导弹弹道进行估计。在极大似然估计中,由于卫星探测导弹运动的可观测性较差,使初始点估计变得十分病态,传统的Gauss Newton迭代算法不再适用,而采用较为复杂Levenberg Marquardt算法,分别对单颗卫星和两颗卫星的情况进行了Monte Carlo仿真,得到了各自的归一化残差测量误差(代价函数),结果表明该算法有效。     

基于星体边缘和轨道投影的光学自主导航算法

针对光学导航中存在的通过星体（球体）图像部分边缘点拟合椭圆参数计算轨道参数产生中间误差的问题,提出利用边缘点映射轨道参数的直接投影模型,避免拟合椭圆参数的方法。在小孔成像模型基础上,建立了边缘点与轨道参数的直接投影数学模型,对其映射过程进行了理论推导,利用列文伯格-马夸尔特迭代算法进行求解轨道参数。用实际探测器以及镜头参数进行数值仿真验证,结果表明：该方法在相同边缘点的条件下,轨道精度可以达到5‰。与传统方法相比,这种方法避免了椭圆的拟合过程,减少了引入中间误差过程。     

A modern robust approach to remotely estimate chlorophyll in coastal and inland zones

The chlorophyll concentration of a water body is an important proxy for representing the phytoplankton biomass. Its estimation from multi or hyper-spectral remote sensing data in natural waters is generally achieved by using (i) the waveband ratioing in two or more bands in the blue-green or (ii) by using a combination of the radiance peak position and magnitude in the red-near-infrared (NIR) spectrum. The blue-green ratio algorithms have been extensively used with satellite ocean color data to investigate chlorophyll distributions in open ocean and clear waters and the application of red-NIR algorithms is often restricted to turbid productive water bodies. These issues present the greatest obstacles to our ability to formulate a modern robust method suitable for quantitative assessments of the chlorophyll concentration in a diverse range of water types. The present study is focused to investigate the normalized water-leaving radiance spectra in the visible and NIR region and propose a robust algorithm (Generalized ABI, GABI algorithm) for chlorophyll concentration retrieval based on Algal Bloom index (ABI) which separates phytoplankton signals from other constituents in the water column. The GABI algorithm is validated using independent in-situ data from various regional to global waters and its performance is further evaluated by comparison with the blue-green waveband ratios and red-NIR algorithms. The results revealed that GABI yields significantly more accurate chlorophyll concentrations (with uncertainties less than 13.5%) and remains more stable in different waters types when compared with the blue-green waveband ratios and red-NIR algorithms. The performance of GABI is further demonstrated using HICO images from nearshore turbid productive waters and MERIS and MODIS-Aqua images from coastal and offshore waters of the Arabian Sea, Bay of Bengal and East China Sea.     

Validation of non-linear split window algorithm for land surface temperature estimation using Sentinel-3 satellite imagery: Case study; Tehran Province,Iran

In recent years, land surface temperature (LST) has become critical in environmental studies and earth science. Remote sensing technology enables spatiotemporal monitoring of this parameter on large scales. This parameter can be estimated by satellite images with at least one thermal band. Sentinel-3 SLSTR data provide LST products with a spatial resolution of 1 km. In this research, direct and indirect validation procedures were employed to evaluate the Sentinel-3 SLSTR LST products over the study area in different seasons from 2018 to 2019. The validation method was based on the absolute (direct) evaluation of this product with field data and comparison (indirect) evaluation with the MODIS LST product and the estimated LST using the non-linear split-window (NSW) algorithm. Also, two emissivity estimation methods, (1) NDVI thresholding method (NDVI-THM) and (2) classification-based emissivity method (CBEM), were used to estimate the LST using the NSW method according to the two thermal bands of Sentinel-3 images. Then, the accuracy of these methods in estimating LST was evaluated using field data and temporal changes of vegetation, which the NDVI-THM method generated better results. For indirect evaluation between the Sentinel-3 LST product, MODIS LST product, and LST estimated using NSW, four filters based on spatial and temporal separates between pairs of pixels and pixel quality were used to ensure the accuracy and consistency of the compared pairs of a pixel. In general, the accuracy results of the LST products of MODIS and Sentinel-3, and LST estimated using NSW showed a similar trend for LST changes during the seasons. With respect to the two absolute and comparative validations for the Sentinel-3 LST products, summer with the highest values of bias (?1.24 K), standard deviation (StDv = 2.66 K), and RMSE (2.43 K), and winter with the lowest ones (bias of 0.14 K, StDv of 1.13 K, and RMSE of 1.12 K) provided the worst and best results for the seasons in the period of 2018–2019, respectively. According to both absolute and comparative evaluation results, the Sentinel-3 SLSTR LST products provided reliable results for all seasons on a large temporal and spatial scale over our studied area.     

基于DDPG算法的无人机集群追击任务

无人机的集群化应用技术是近年来的研究热点，随着无人机自主智能的不断提高，无人机集群技术必将成为未来无人机发展的主要趋势之一。针对无人机集群协同执行对敌方来袭目标的追击任务，构建了典型的任务场景，基于深度确定性策略梯度网络（DDPG）算法，设计了一种引导型回报函数有效解决了深度强化学习在长周期任务下的稀疏回报问题，通过引入基于滑动平均值的软更新策略减少了DDPG算法中Eval网络和Target网络在训练过程中的参数震荡，提高了算法的训练效率。仿真结果表明，训练完成后的无人机集群能够较好地执行对敌方来袭目标的追击任务，任务成功率达到95%。可以说无人机集群技术作为一种全新概念的作战模式在军事领域具有潜在的应用价值，人工智能算法在无人机集群的自主决策智能化发展方向上具有一定的应用前景。     

基于 Kriging与多点取样算法的压气机特性建模

针对航空燃气轮机流量系数插值建模过程中,获取样本数据时的实验成本较高以及插值模型精度偏低这 2个问题,根据样本点在设计空间中的分布与模型精度的关系,在 Kriging插值模型的基础上,采用把垂距作为设计变量取值标准的取样算法。首先,将样本点与相邻 2点之间连线的垂距与垂距阈值进行比较,筛选出符合条件的数据点,形成候选点集;其次,选用高斯函数判定基础点集和候选点集的相关性;最后,使用该算法筛选后的样本点构建 Kriging插值模型。实验结果表明,该方法使用的样本点为原来数量的 70%左右,并且预测精度得到了提高,该方法是有效可行的。     

低空无人机路径规划算法综述

随着无人机技术的发展,无人机在低空的应用场景越来越多,复杂的低空环境对无人机路径规划算法提出了新的要求。本文总结了近年来常用的无人机路径规划算法,包括图搜索算法,线性规划算法,智能优化算法（遗传算法、粒子群算法、蚁群算法）,强化学习算法;对这些算法的原理、适用场景及其优缺点进行了归纳分析;并基于无人机发展现状对无人机路径规划算法进行了展望。     

遗传算法在机翼气动优化设计中的应用

把最优化方法与机翼的气动力求解相结合,进行跨音速机翼的气动优化设计。采用最优化方法为遗传算法,机翼的气动力由三维欧拉方程的数值解来提供。与基准机翼相比较,优化设计的机翼其气动性能有较大幅度的提高,表明遗传算法在机翼优化设计中的可行性和有效性     

航天飞机再入航迹初步设计的一种计算方法

本文给出一种由航天飞机质心位置和飞行速度随高度的变化值计算再入航迹其它运动参数的方法。用美国“哥伦比亚”号航天飞机轨道器的飞行数据验算表明,该方法不失为一种可供再入航迹初步设计中选用的简便算法。