30CrMnSiA缺口试样低周疲劳寿命研究

缺口会导致严重的应力集中,并降低结构的使用寿命,研究缺口部位的低周疲劳寿命具有重要意义。基于弹塑性全量理论建立30CrMnSiA材料的弹塑性本构关系,采用损伤力学-有限元法预测30CrMnSiA材料缺口试样的低周疲劳寿命,并与相应的试验结果进行对比。结果表明:基于弹塑性全量理论建立的弹塑性本构关系方法合理,采用损伤力学方法得到的疲劳寿命预测结果基本满足工程实际要求,该方法可用来对30CrMnSiA缺口试样进行低周疲劳寿命预测。     

多支点柔性转子系统临界转速稳健设计方法

基于响应面法和容差模型提出了定量考虑参数变差影响的转子系统临界转速稳健设计方法。该方法利用响应面模型获得多参数、多目标之间的函数关系,并以多阶临界转速分布为约束条件、以临界转速对支承刚度变差敏感度最低为设计目标。对小涵道比涡扇发动机低压转子系统临界转速稳健设计结果表明:在考虑各支点支承刚度变差情况下,采用多参数、多目标稳健设计方法,可保证多支点柔性转子系统的临界转速特性在满足设计要求的同时,转子系统临界转速对支承刚度变差的敏感度最低,验证了该方法的有效性。      

构架式可展天线机构自由度分析——拆杆等效法

针对四面体构架式可展天线机构的多环耦合特性,提出了一种空间多环耦合机构的自由度分析方法——拆杆等效法。首先拆除四面体基本可展单元机构的耦合约束链,将剩余部分视为一个并联机构,然后应用螺旋理论分析各输出节点的自由度数目及性质,进而构造各输出节点与定节点之间的等效串联运动链,最后复原拆除的耦合约束链得到四面体基本可展单元的等效机构,应用修正的G-K公式计算等效机构的自由度数目,并基于反螺旋理论分析等效机构的自由度性质,从而获得四面体基本可展单元的运动特性。根据四面体基本可展单元的等效机构及其组合方式对最小组合单元及大尺寸构架式可展天线机构的结构进行了化简,并根据其几何特征约束方程推导了最小组合单元及大尺寸构架式可展天线机构的自由度。建立了由27个四面体基本可展单元组成的构架式可展天线机构的仿真模型,对该机构的自由度进行了验证,结果表明提出的拆杆等效法求得的自由度正确,为进一步分析此类天线机构的运动学和动力学奠定了基础,同时为其他类型的空间多环耦合机构的自由度分析提供了一种新的思路。     

气动力/热与结构多场耦合试验模型方案初步设计

以多渠道、多机制交叉耦合为热防护结构特点的新一代高超声速飞行器必须采用气动力/热与结构多场耦合计算方法进行研究。目前,国外已建立较完善的耦合分析系统并用于飞行器研制,国内的中国空气动力研究与发展中心(CARDC)也已自主研发了热环境/热响应耦合计算平台(FL-CAPTER)。为验证多场耦合计算平台所用方法的有效性和计算结果的准确性,设计并开展气动力/热与结构耦合的地面试验具有十分重要的意义。本文结合气动力/热与结构多场耦合试验设计需求,以现有材料和设备能力为依托,开展了试验风洞选取、模型尺寸估算、模型材料选择、模型气动设计与模型结构设计工作。初步研究表明,模型支撑结构附近迎风面局部高温热膨胀将有利于模型前体结构产生可观的整体变形量。本文以此设计了带压缩拐角的二级压缩面结构模型,通过短时间不锈钢模型验证试验和计算对比分析初步验证了模型设计的可行性,并以此为基础预测了高温合金模型的试验结果。为下一步开展高温合金长时间风洞试验奠定了技术基础。     

Investigation of dynamics of discrete framed structures by a numerical wave-based method and an analytical homogenization approach

In this article, the analytical homogenization method of periodic discrete media (HPDM) and the numerical condensed wave finite element method (CWFEM) are employed to study the lon-gitudinal and transverse vibrations of framed structures. The valid frequency range of the HPDM is re-evaluated using the wave propagation feature identified by the CWFEM. The relative error of the wavenumber by the HPDM compared to that by the CWFEM is illustrated in functions of fre-quency and scale ratio. A parametric study on the thickness of the structure is carried out where the dispersion relation and the relative error are given for three different thicknesses. The dynamics of a finite structure such as natural frequency and forced response are also investigated using the HPDM and the CWFEM.     

A cost driven predictive maintenance policy for structural airframe maintenance

Airframe maintenance is traditionally performed at scheduled maintenance stops.The decision to repair a fuselage panel is based on a fixed crack size threshold,which allows to ensure the aircraft safety until the next scheduled maintenance stop.With progress in sensor technology and data processing techniques,structural health monitoring (SHM) systems are increasingly being considered in the aviation industry.SHM systems track the aircraft health state continuously,lead ing to the possibility of planning maintenance based on an actual state of aircraft rather than on a fixed schedule.This paper builds upon a model-based prognostics framework that the authors developed in their previous work,which couples the Extended Kalman filter (EKF) with a first order perturbation (FOP) method.By using the information given by this prognostics method,a novel cost driven predictive maintenance (CDPM) policy is proposed,which ensures the aircraft safety while minimizing the maintenance cost.The proposed policy is formally derived based on the trade-off between probabilities of occurrence of scheduled and unscheduled maintenance.A numerical case study simulating the maintenance process of an entire fleet of aircrafts is imple mented.Under the condition of assuring the same safety level,the CDPM is compared in terms of cost with two other maintenance policies:scheduled maintenance and threshold based SHM maintenance.The comparison results show CDPM could lead to significant cost savings.     

Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.     

基于Ansys的永磁同步电机转子振动分析

振动是电机的重要指标,对电机转子进行振动分析为其结构改进和性能优化提供理论依据。运用Ansys有限元分析软件对永磁同步电机转子进行模态分析,得到该电机转子振动系统的低阶固有频率和模态振型,分析了电机振动特性。 通过电机转子模态试验,求得电机低阶固有频率,对比仿真与试验结果,验证有限元分析结果的可靠性。由结果分析可知,研究对象在额定转速下未产生共振,验证了其结构设计的合理性。研究内容对永磁同步电机的设计和优化有一定的指导意义。     

永磁力矩电机三相绕组不对称性改进方法研究

由于力矩电机多作为驱动电机使用,且电机对低速平稳性要求很高,所以选用了一种特殊的极槽配合方式。12极39槽的选择使得电机齿槽转矩较小的同时导致电机三相绕组不对称。降低绕组不对称对电机低速平稳性的影响,对提高绕组的对称性的方法研究有着重要的意义。以一台采用12极39槽的力矩电机为例,提出了一种绕组不对称性的改进方法,通过改变绕组的排列方式提高了绕组的对称性,且保证了电机的低速平稳性。最终通过理论研究与仿真分析验证了不对称性改进方法的有效性。     

白天激光漫反射测距中微弱信号检测的单开门多触发方法

白天激光漫反射测距因存在强背景噪声,导致微弱回波信号的检测十分困难,严重限制了激光漫反射测距的广泛应用。因此,提出了采用单开门多触发方法解决白天激光漫反射测距的微弱信号检测难题。首先,介绍了一种GM-APD (Geiger-ModeAvalanchePhotoDiode,盖革模式雪崩光电二极管)多触发概率分布函数的快速求解方法。接着,取激光漫反射测距系统典型参数,理论分析了多触发情况下的回波信号检测概率,分析结果表明单开门多触发方法可提高激光漫反射测距在白天情况下的回波信号检测概率。同时,通过对触发次数限制的优选,可以增加有效检测比,减少白天观测条件下回波信号的提取代价。最终,通过系统仿真验证了理论分析结果的正确性。因此,单开门多触发方法是解决白天激光漫反射测距微弱信号检测的可行途径之一。