交流电量参数采集器的设计

介绍以单片机8031为核心的三相电网电量参数采集器的软硬件设计方法。本采集器采用同步采样技术,对电压、电流直接进行同步交流采样,利用单片机运算处理能力,得出电网的电压、电流、有功、无功功率因素等电量参数。     

Study on Satellite-to-ground Laser Communications with Existence of Atmosphere

The laser beam used to establish a communication channel between satellite and ground segments has a small divergence angle and a tiny spot on the Earth’s surface, which may lead to the fail of the system. So it’s important to study the deflection of laser beam by the Earth’s atmosphere and find a way to calibrate this error. Both theoretical analysis and real data processing method are used to obtain the mathematical model for divergence angle of laser communication beam and its correction function. Then the model has been applied to the data, which was used to describe the atmosphere state by traditional ground segments to obtain the critical elevation angle. According to the results of calculation, our conclusion will be that the correction should be done when the critical elevation happens.      

连续激光加热推力器性能的简化解析计算模型

针对具有开放式吸收室的连续激光加热推力器,通过合理简化和分析,建立了一维流推力     

激光测高仪回波分解算法

开发了一种激光测高仪回波基本信息提取算法,对回波数据进行了高斯波分解,获取了高斯波分量的个数,及每个高斯波分量的波中心位置、宽度和幅度等参数．该算法首先根据回波拐点的数目和位置确定出高斯分量的个数及每个高斯分量的波中心位置和宽度初始值,随后利用线性最小二乘法计算出每个高斯分量的幅度,最后将经过选择和标记的高斯分量针对实际回波采用Levenberg-Marquardt方法进行拟合,得到优化后的高斯波基本参数．通过这些基本参数信息,能够进一步推导出激光测高仪光斑内各个反射表面的垂直分布、起伏程度和反射率等基本信息．     

抛物形吸气式脉冲爆震激光推力器性能预示的解析模型

考虑激光束、推力器构型以及大气环境三方面因素,建立了抛物形吸气式脉冲爆震 激 光推力器性能预示的解析计算模型。其中,将推力室内的流场发展过程分为吸收波和冲击波 衰减两个阶段,应用Sedov点爆炸理论,以等效锥形约束空间,引入单一的修正因子以反 映流场的不均匀性。计算表明,其结果同现有实验数据吻合。〖JP〗     

激光陀螺误差分析的Allan方差法改进研究

针对传统Allan方差法分析激光陀螺误差特性过程中,不能合理解释方差中部分噪声项出现负值的情况,而采用阻尼振荡的分析方法能够对此给出合理解释,却又损失了辨识精度的问题,提出了一种基于动态Allan方差法理论的改进Allan方差法。该方法将阻尼振荡模型与动态Allan方差模型相结合,使得辨识结果的分析过程更加合理。激光陀螺零偏误差的辨识与分析结果表明:改进Allan方差法的辨识结果精度略高些,在改进Allan方差的三维分析图中可以显示出零偏中存在的数据突变情况,能够反应激光陀螺误差的动态特性。因此,改进Allan方差法更适用于激光陀螺误差特性的分析。     

航天器激光防护材料研究现状与发展趋势

根据激光防护的原理和途径,介绍了基于线性光学原理、基于非线性光学原理和基于相变原理的激光防护材料的特点及其国内外研究进展,讨论了激光防护材料的发展方向。     

Removing orbital debris with lasers

Orbital debris in low Earth orbit (LEO) are now sufficiently dense that the use of LEO space is threatened by runaway collision cascading. A problem predicted more than thirty years ago, the threat from debris larger than about 1 cm demands serious attention. A promising proposed solution uses a high power pulsed laser system on the Earth to make plasma jets on the objects, slowing them slightly, and causing them to re-enter and burn up in the atmosphere. In this paper, we reassess this approach in light of recent advances in low-cost, light-weight modular design for large mirrors, calculations of laser-induced orbit changes and in design of repetitive, multi-kilojoules lasers, that build on inertial fusion research. These advances now suggest that laser orbital debris removal (LODR) is the most cost-effective way to mitigate the debris problem. No other solutions have been proposed that address the whole problem of large and small debris. A LODR system will have multiple uses beyond debris removal. International cooperation will be essential for building and operating such a system.     

机身上壁板复合材料蒙皮数字化成型工艺

为解决树脂基复合材料复杂结构件工艺难以实现问题,采用三维工艺模型设计、铺层工艺仿真、铺层样片排版与数控下料、激光投影铺层定位等数字化技术,不但从根本上改变了传统的复合材料构件生产方式,解决了工艺技术难题,而且在缩短研制周期、提高产品质量,降低研制成本等方面都取得了显著的应用效果。     

振动台动态角的测试方法研究

振动台在高频振动过程中难免会产生空间的小角度运动,这种角运动在振动试验中是非预期的,应尽量减小。利用激光干涉原理,运用双频激光干涉仪及角度测量组件测量了振动台振动频率达2 000Hz时方位、俯仰、横滚三个方向的实时角度、角速率。通过对测量数据的分析可知环境的振动对测量准确度影响较大,为进一步完善该测试方法指明了研究方向。