应用激光测振技术提高模态试验测量准确度

以一个标准直梁为研究对象,应用扫描式激光测振系统对梁进行了模态测量,得到梁的弯曲振动和纵向振动固有频率和振型,光测结果与理论计算结果相符。与传统的传感器测量结果相比,激光多普勒测振技术测量准确度高,可以很好的解决传感器对结构产生的附加质量的问题,尤其适用于轻薄结构的模态测量。     

基模高斯激光束高倍率扩束实验研究

基于激光光学设计了一个适合实验室环境的高倍率激光扩束系统,并进行了相应的实验研究。实验结果表明束腰半径为0.295mm的激光束,最大被扩束至束腰半径约12.04mm。     

Surface micro-texture on sapphire fabricated by laser ablation trajectory regulation

Fabrication of the surface micro-texture on the C-plane sapphire is undertaken by a355 nm Ultraviolet(UV) pulsed laser. The surface micro-textures of sapphire with different laser scanning line spacing ranging from 10 lm to 100 lm are obtained, where the selection range of scanning line spacing is controlled in the range of the groove width and plasma width to obtain a surface of high Peak-Valley(PV) value. A reasonable processing order is proposed to manufacture different types of surface micro...     

22 Years of AJISAI spin period determination from standard SLR and kHz SLR data

Satellite Laser Ranging (SLR) is a powerful and efficient technique to measure spin parameters of satellites equipped with corner cube reflectors. We obtained spin period determination of the satellite AJISAI from SLR data only: 17246 pass-by-pass estimates from standard 1–15 Hz SLR data (14/Aug/1986–30/Dec/2008) and 1444 pass-by-pass estimates (9/Oct/2003–30/Dec/2008) from data of the first 2 kHz SLR system from Graz, Austria. A continuous history of the slowing down of AJISAI spin is derived from frequency analysis, and corrected for the apparent effects. The apparent corrections, elaborated here, allowed very accurate determination of AJISAI initial spin period: 1.4855 ± 0.0007 [s]. The paper identifies also non-gravitational effects as a source of the periodical changes in the rate of slowing down of the satellite.     

吸气式激光推力器概念设计

以发射10kg级微小卫星为航天任务背景,基于地面推力1000N的设计指标,分析了吸气式激光推进的主要性能参数,依据所建立的激光推进能量相似律理论和数值计算研究结果,对激光参数、聚焦系统和喷管子系统进行设计,完成了封闭的吸气式激光推力器概念设计循环。所提出的二次反射聚焦系统与抛物形喷管组合的吸气式激光推力器概念模型经数值计算程序验证,可以获得地面500N/MW的冲量耦合系数。所提出的设计理论和方法对激光推力器概念设计有一定的参考价值,是研制激光推力器模型的重要基础。     

激光推进辐射击穿温度特性的数值研究

在9种等离子体击穿温度下,数值模拟了二次反射式聚焦系统聚焦情况下激光推力器内流场的演化过程,得到了不同击穿温度对应的能量沉积率、推力峰值、冲量和冲量耦合系数,能量沉积率和推进性能参数在某个等离子体击穿温度值处发生突变。根据空气对激光的逆韧致吸收系数公式,计算了CO2激光辐照下不同等离子体击穿温度对应的空气辐射自由程,发现当等离子体击穿温度为14000K时,辐射自由程为1.4mm,与计算网格的典型尺寸相当,此时入射激光能量在一个网格内以一定效率被吸收,由此确定了基于逆韧致吸收的激光等离子体的击穿温度。     

激光推力器材料耐热性能的数值分析

推力器是激光推进的重要部件,推力器材料的选择需要充分考虑其承受强激光辐射后的耐热性能,避免被熔化破坏。基于激光辐照一维加热熔化模型,提出了高精度和快速的温度场计算方法,研究了强激光辐照推力器材料时的熔化时间,材料表面及内部温度场分布,进一步提出了材料优选的原则:低激光吸收率、高热传导率。以部分典型材料为实例,对耐热性能进行了对比分析,并给出了较好的推力器材料。     

激光成像系统实验研究

为解决激光脚点（laser footprint）在光学图像中的定位问题,建立分析模型,构建了集成激光测距机和CCD摄像机的实验室激光成像系统;通过实验,对采集的数据进行了图像配准和融合,反演出被测目标三维图像,包含了被测目标高程与灰度信息。     

ICAN: A novel laser architecture for space debris removal

The development of a fiber based laser architecture will enable novel applications in environments which have hitherto been impossible due to size, efficiency and power of traditional systems. Such a new architecture has been developed by the International Coherent Amplification Network (ICAN) project. Here we present an analysis of utilizing an ICAN laser for the purpose of tracking and de-orbiting hyper-velocity space debris. With an increasing number of new debris from collisions of active, derelict and new payloads in orbit, there is a growing danger of runaway debris impacts. Due to its compactness and efficiency, it is shown that space-based operation would be possible. For different design parameters such as fiber array size, it is shown that the kHz repetition rate and kW average power of ICAN would be sufficient to de-orbit small 1–10 cm debris within a single instance via laser ablation.     

Hot deformation behavior and microstructure evolution of the laser solid formed TC4 titanium alloy

Hot compressive experiments of the laser solid formed (LSFed) TC4 titanium alloy were conducted at a wide temperature range of 650–950 °C and strain rate of 0.01–10 s⁻¹. The Arrhenius-type constitutive models of the LSFed TC4 alloy were established at the temperature range of 800–950 °C and of 650–800 °C, respectively. The average relative error between the predicted stresses and experimental values in those two temperature ranges are 10.4% and 8.3%, respectively, indicating that the prediction models constructed in this paper are in a good agreement with experimental data. Processing maps were established by the principle of dynamic materials modeling on the basis of the data achieved from the hot compression experiments. The processing parameters corresponding to the stable and unstable regions of material deformation can be determined from the processing maps. The microstructure evolution of the stable and unstable regions of the samples after tests were observed. Finally, the effect of hot compressive parameters on the microstructure were investigated to research the dynamic recrystallization and the texture of the deformed LSFed TC4 alloy.