激光选区熔化制备钛合金点阵材料无损表征

通过激光选区熔化制备BCC和DOD结构的钛合金金属点阵,使用Micro–CT对两种结构的钛合金点阵材料进行扫描和三维重建。Micro–CT图像清晰地显示金属点阵内部结构,BCC和DOD单胞整齐地以周期性进行排列,且内部存在少量圆形、椭圆形缺陷。通过将实际样品三维数据与CATIA数模进行比对,发现钛合金点阵在制备过程中出现一定程度翘曲。此外使用共聚焦显微镜并基于Micro–CT图像对BCC和DOD两种金属点阵进行表面粗糙度测定。结果表明,Micro–CT在钛合金点阵材料内部结构、缺陷、制备误差、粗糙度测试等表征方面具有显著的应用价值。     

基于大型制造虚拟数字工装测量平台应用研究

分析了某大型特种部件制造过程中产生的难点,基于激光跟踪数字测量定位技术,论述了虚拟数字工装测量平台的设计原理,结合实例详细阐释了测量平台在大型特种部件制造过程中的应用,采取坐标数组控制方法,解决了制造过程难点。经实践验证,该测量平台能有效辅助大型特种部件制造并有效控制质量。     

背带式双波长全固态激光清洗设备

介绍了一种背带式18W全固态1064nm/532nm双波长激光清洗设备,其中,532nm绿光功率为6.4W,M2=2,不稳定度小于1%。针对表面油漆涂层和铁锈进行了清洗试验,并给出了清洗工件的金相图,结果表明能够满足工业清洗的要求。     

A preliminary study of pulse-laser powered orbital launcher

An air-breathing pulse-laser powered orbital launcher has been proposed as an alternative to conventional chemical launch systems. The aim of the present study is to assess its feasibility through the estimation of its achievable payload mass per unit beam power and launch cost. A transfer trajectory from the ground to a geosynchronous Earth orbit (GEO) is proposed, and the launch trajectory to its geosynchronous transfer orbit (GTO) is computed using the realistic performance modeled in the pulsejet, ramjet, and rocket flight modes of the launcher. Results show that the launcher can transfer 0.084 kg of payload per 1 MW beam power to a geosynchronous earth orbit. The cost becomes a quarter of existing systems if one can divide a single launch into 24,000 multiple launches.     

The fundamental physics explorer: An ESA technology reference study

ESA technology reference studies are used as a process to identify key technologies and technical challenges of potential future missions not yet in the science programme. This paper reports on the study of the Fundamental Physics Explorer (FPE), a re-usable platform targeted to small missions testing fundamental laws of physics in space. The study addresses three specific areas of interest: special and general relativity tests based on atomic clocks, experiments on the Weak Equivalence Principle (WEP), and studies of Bose–Einstein condensates under microgravity conditions. Starting from preliminary science objectives and payload requirements, three reference missions in the small/medium class range are discussed, based on a re-adaptation of the LISA Pathfinder spacecraft. A 700/3600 km elliptic orbit has been selected to conduct clock tests of special and general relativity, a 700 km circular orbit to perform experiments on the Weak Equivalence Principle and to study Bose–Einstein condensates, each mission being based on a three-axis stabilised spacecraft. It was determined that adaptation of LISA Pathfinder would be required in order to meet the demands of the FPE missions. Moreover it was established that specific payload and spacecraft technology development would be required to realise such a programme.     

激光焊接ZL114A/5A06 异种铝合金接头组织及性能

采用激光焊接ZL114A/5A06异种铝合金,通过参数优化以获得性能优良的焊接接头,利用光学显微镜(OM)、拉力试验机、高温疲劳试验机、SEM和EDS对接头的显微组织、力学性能和拉伸断口进行了研究。结果表明:焊缝中心区的金相组织为等轴晶;接头焊后不经热处理,抗拉强度可达到265 MPa,为母材强度的80%以上,并有很好的抗疲劳性能;断口分析显示断裂位置在ZL114A母材一侧的熔合线附近;在保证焊透的前提下,激光功率越小,晶粒越细小,接头强度越高。对框架蒙皮结构铝合金贮箱产品试验件进行了焊接,试验件达到了产品各项性能指标要求。     

TLE数据误差与基于TLE数据的交会预报分析

目前普遍使用TLE数据进行在轨物体的危险交会预报. TLE数据误差不仅会影响交会预报的准确性, 还是计算碰撞概率的必要参数, 因此, 只有准确估计TLE数据误差, 才能得到可信的碰撞概率数值. 本文采用两种方法, 即TLE数据自比和与高精度轨道预报数据相比较的方法, 计算TLE数据误差, 并分别利用TLE数据和高精度数据计算同一交会, 比较两种数据预报的交会结果差异. 结果表明, 采用TLE根数自比方法的计算误差偏小, 而使用精轨数据作为校准数据所得到的TLE误差更接近真实误差, 计算碰撞概率更为合理, 有利于减少虚警.      

Fatigue behavior of direct laser deposited Ti-6.5Al-2Zr-1Mo-1V titanium alloy and its life distribution model

The present work aims to investigate the fatigue behavior of Direct Laser Deposition (DLD) Ti-6.5Al-2Zr-1Mo-1V titanium alloy under constant amplitude stress. 22 pieces of DLD Ti-6.5Al-2Zr-1Mo-1V titanium alloy standard cylinder specimens were tested under a stress level of 800?MPa with a stress ratio of 0.06. Fatigue fractography and fatigue life data were obtained. Through the fracture surface analysis, the specimens were divided into two categories in accordance with the location of crack initiation and defect types. Comparison of fatigue life and behavior between two specimen types was given, which was followed by a discussion about the impact of defect type, size and position on the fatigue life of the specimen. The fatigue test results also show a large variation of fatigue life. To illustrate the statistical characteristics of the fatigue life, probabilistic analysis was performed, and a novel bimodal lognormal model was established. The model has a good fit with the experimental data and can reduce the scatter of the fatigue life significantly.     

Spin motion determination of the Envisat satellite through laser ranging measurements from a single pass measured by a single station

The Satellite Laser Ranging (SLR) technology is used to accurately determine the position of space objects equipped with so-called retro-reflectors or retro-reflector arrays (RRA). This type of measurement allows to measure the range to the spacecraft with high precision, which leads to determination of very accurate orbits for these targets. Non-active spacecraft, which are not attitude controlled any longer, tend to start to spin or tumble under influence of the external and internal torques and forces.If the return signal is measured for a non-spherical non-active rotating object, the signal in the range residuals with respect to the reference orbit is more complex. For rotating objects the return signal shows an oscillating pattern or patterns caused by the RRA moving around the satellite’s centre of mass. This behaviour is projected onto the radial component measured by the SLR.In our work, we demonstrate how the SLR ranging technique from one sensor to a satellite equipped with a RRA can be used to precisely determine its spin motion during one passage. Multiple SLR measurements of one target over time allow to accurately monitor spin motion changes which can be further used for attitude predictions. We show our solutions of the spin motion determined for the non-active ESA satellite Envisat obtained from measurements acquired during years 2013–2015 by the Zimmerwald SLR station, Switzerland. All the necessary parameters are defined for our own so-called point-like model which describes the motion of a point in space around the satellite centre of mass.     

实战天基激光武器系统设计的技术需求分析

本文系根据美国天基激光武器采购能力和结构研究 (A&AS)项目综述的一篇技术报告。文中分析了空军和导弹防御组织 (BMDO)发展天基激光武器 (SBL)所采取的现行技术途径以及为使实战SBL系统投入战场使用所必需的技术需求。A&AS项目确认了需要大力改进当前技术能力的几个重要技术领域 :发展大型展开式光学系统 ,提高波阵面控制和振动控制能力 ,增加激光器功率。最后讨论了还需改进的远程目标捕获、跟踪和指向控制技术 ,空间飞行器的共性技术 ,建模和仿真 ,以及地面试验技术。