交互式多模型粒子滤波优化重采样算法

针对标准交互式多模型粒子滤波(IMMPF)算法中存在粒子退化及多样性匮乏问题,提出了交互式多模型粒子滤波优化重采样(IMMPFOR)算法,利用线性优化理论改善模型中具有小权值的粒子精度。该算法的新颖性体现在给定量测信息条件下,利用线性优化方法及模型交互概率将每个模型中拥有小权值的粒子替换成新的粒子。新的粒子既包含本模型中粒子信息,又包含了本模型与其他模型交互后的粒子信息。目标跟踪的仿真结果证明:每个模型新产生的粒子集合可以准确地近似真实状态后验概率密度函数,系统的估计精度与标准IMMPF算法相比有较大提升。     

基于递推更新卡尔曼滤波的磁偶极子目标跟踪

针对磁性目标跟踪问题,以磁偶极子等效场源模型为基础,建立磁性目标跟踪的离散状态空间模型,将磁偶极子目标实时跟踪问题转化为状态空间模型的滤波估值问题。针对磁性目标初始条件难以获得且现有卡尔曼类滤波算法在大初始误差条件下容易出现发散的问题,提出一种递推观测更新的卡尔曼滤波算法,将现有的一步观测更新描述为递推更新过程,等效降低大初始误差带来的大非线性误差。仿真与实测数据测试结果表明,本文算法具有良好的精度和收敛性,能够有效抑制磁偶极子跟踪中由于大初始误差导致的滤波发散,适于实际应用。     

调频多普勒引信抗调幅干扰性能分析

为提高调频多普勒引信抗调幅干扰性能,定量研究了调幅干扰对其作用机理,以信干比(SJR)增益作为表征参量定量研究了不同调幅干扰作用下调频多普勒引信的抗干扰性能。详细推导了正弦波调幅、方波调幅和三角波调幅干扰作用下调频多普勒引信的信干比增益,并对其进行了仿真验证。定量分析、仿真与引信实验测试结果表明:在调幅干扰下调频多普勒引信总信干比增益在10 d B量级;调频多普勒引信抗各种调制样式调幅干扰能力相当,对调幅干扰调制样式不敏感;调幅指数对调频多普勒引信抗干扰性能基本无影响;减小多普勒滤波器带宽可以一定程度提高调频多普勒引信系统抗干扰性能。     

Onboard orbit determination using GPS observations based on the unscented Kalman filter

Spaceborne GPS receivers are used for real-time navigation by most low Earth orbit (LEO) satellites. In general, the position and velocity accuracy of GPS navigation solutions without a dynamic filter are 25 m (1σ) and 0.5 m/s (1σ), respectively. However, GPS navigation solutions, which consist of position, velocity, and GPS receiver clock bias, have many abnormal excursions from the normal error range for space operation. These excursions lessen the accuracy of attitude control and onboard time synchronization. In this research, a new onboard orbit determination algorithm designed with the unscented Kalman filter (UKF) was developed to improve the performance. Because the UKF is able to obtain the posterior mean and covariance accurately by using the second-order Taylor series expansion through the sampled sigma points that are propagated by using the true nonlinear system, its performance can be better than that of the extended Kalman filter (EKF), which uses the linearized state transition matrix to predict the covariance. The dynamic models for orbit propagation applied perturbations due to the 40 × 40 geo-potential, the gravity of the Sun and Moon, solar radiation pressure, and atmospheric drag. The 7(8)th-order Runge–Kutta numerical integration was applied for orbit propagation. Two types of observations, navigation solutions and C/A code pseudorange, can be used at the user’s discretion. The performances of the onboard orbit determination were verified using real GPS data of the CHAMP and KOMPSAT-2 satellites. The results of the orbit determination were compared with the precision orbit ephemeris (POE) of the CHAMP and KOMPSAT-2 satellites.     

天线罩干扰下的雷达/红外复合导引头数据融合

针对雷达/红外复合导引头中存在天线罩折射以及外部干扰问题,在三维模型下,提出一种基于扩展卡尔曼滤波(EKF,Extended Kalman Filter)的多模型算法,对天线罩斜率进行估计,并将估计结果代入EKF,降低观测视线角中的天线罩折射干扰,形成最优局部估计.采用基于环境信息的加权因子法对雷达/红外局部估计结果进行融合,通过环境信息度量传感器测量结果的可信度,忽略不可信的局部估计结果.设计4组算例检验融合算法性能,仿真结果表明:所提算法可以准确估计天线罩斜率,合理并有效使用雷达/红外传感器信息,提高系统估计精度.     

Low C/N_0 Carrier Tracking Loop Based on Optimal Estimation Algorithm in GPS Software Receivers

Suppressing jitter noises in a phase locked loop(PLL) is of great importance in order to keep precise and continuous track of global positioning system(GPS) signals characterized by low carrier-to-noise ratio(C/N0).This article proposes and analyzes an improved Kalman-filter-based PLL to process weak carrier signals in GPS software receivers.After reviewing the optimal-bandwidth-based traditional second-order PLL,a Kalman-filter-based estimation algorithm is implemented for the new PLL by decorrelating the model error noises and the measurement noises.Finally,the efficiency of this new Kalman-filter-based PLL is verified by experimental data.Compared to the traditional second-order PLL,this new PLL is in position to make correct estimation of the carrier phase differences and Doppler shifts with less overshoots and noise disturbances and keeps an effective check on the disturbances out of jitter noises in PLL.The results show that during processing normal signals,this improved PLL reduces the standard deviation from 0.010 69 cycle to 0.007 63 cycle,and for weak signal processing,the phase jitter range and the Doppler shifts can be controlled within ±17° and ±5Hz as against ±25° and ±15 Hz by the traditional PLL.     

基于扩展卡尔曼滤波的动量轮故障检测方法

 动量轮作为卫星姿态控制系统的关键执行部件,对其故障检测对维持卫星的正常运行具有重要意义。首先对动量轮系统的故障进行分析,在建立动量轮线性离散状态空间模型的基础上,把动量轮的故障检测作为时变参数系统的跟踪来处理,将动量轮的模型参数作为扩展的状态空间中的状态量,使得动量轮物理模型参数与状态空间中的状态量有对应关系,通过在扩展了的状态空间上采用扩展的卡尔曼滤波,完成时变参数的跟踪。然后,将离散空间的状态量变换回连续空间中,利用物理参数与状态量的对应关系,实现对动量轮物理参数的跟踪。此方法物理意义明确,为系统的物理参数提供了定量的估计值,为进一步诊断故障原因提供了良好的基础。数值仿真表明,此方法能够通过同时检测多个故障参量,实现故障的检测并满足卫星实时性要求。     

基于Linux下TC的网络流量管理

介绍Linux下的流量管理器（TC）,讨论了TC的排队规定、分类和过滤器三个关键组件的相关细节,给出运用TC工具实现网络流量管理的具体实例。     

基于自适应阈值的粒子滤波非线性系统故障诊断

针对实际非线性系统传统方法难以实现可靠故障诊断的问题,采用粒子滤波算法,利用对数似然函数和作为评价指标,并借助自适应阈值的设计,研究了非线性非高斯系统的故障检测和故障隔离。阈值的选取,是准确判别系统是否发生故障的标准,本文通过分析非线性系统残差的统计特性,在判定残差统计特性成正态分布的基础上,设计了一种基于粒子滤波故障诊断的自适应阈值方法,减少了故障诊断的漏报和误报。通过非恒温连续搅拌水箱式反应堆的仿真实例,验证了该方法在故障诊断中的准确性和有效性。