第三代短波通信自动链路建立技术研究与实现

美军标准M IL-STD-181-141B中定义了第三代短波通信网中的关键技术—自动链路建立(ALE)。文章对此技术进行了研究,给出了硬件及软件实现,并用同步模式下的点对点自动链路建立加以说明。     

室内覆盖系统在3G网络中的应用

通过对室内有源、无源覆盖系统改造方案的介绍,探讨了室内覆盖系统在3G网络中的应用,提出了3G室内覆盖解决方案。     

K403合金高性能钎焊技术研究

用新型镍基钎料3P1对K403合金进行真空钎焊试验,分析钎焊接头的微观组织和连接机制,测试接头高温力学性能.结果表明:采用3P1钎料,在1230℃/10min 1160℃/4h条件下进行K403合金钎焊,可以获得无缺陷的,与基体组织相似的钎焊接头,其1000℃下高温拉伸强度可以达到基体强度的90%,高温持久强度可以达到基体强度的70%以上.     

通信导航一体化技术研究进展

近年来,大众对泛在位置服务的需求不断增长,卫星导航在室内等场景下覆盖能力不足,已无法满足人们的需求。由于通信信号覆盖范围广、用户数量大、信号频带宽,将通信信号用于定位可成为卫星导航的有效补充。在此背景下,随着通信和定位技术的快速发展,通信和导航的耦合程度不断加深,产生了通信导航一体化技术(CPIT),并成为了国内外的研究热点。通信系统中毫米波、多入多出(MIMO)、波束成形等技术为CPIT的发展带来了新的契机。首先介绍了CPIT的演进过程;然后就CPIT中的关键技术进行了总结并分析了其研究现状;最后对CPIT的发展进行了展望。     

GH4169G合金零件异常腐蚀区缺陷分析

针对生产中GH4169G合金零件低倍全面腐蚀时出现的异常腐蚀区,采用光学显微镜、扫描电子显微镜及能量散射谱,对正常区域和异常腐蚀区的宏观、微观组织形貌及化学成分进行了对比分析。结果表明,异常腐蚀区为白斑缺陷;虽然该异常腐蚀区离散分布着富Ca和富Mg的氧化物颗粒,但氧化物颗粒未见聚集,由此判断该缺陷为"干净"白斑。强度类比评估表明,带白斑缺陷零件可满足阶段性试验要求,且试验后分解检查未发现零件异常。     

Robust trajectory planning for UAV communication systems in the presence of jammers

Unmanned Aerial Vehicle(UAV) has emerged as a promising novel application for the Sixth-Generation(6G) wireless communication by leveraging more favorable Line-of-Sight(Lo S)propagation. However, the jamming resistance by exploiting UAV’s mobility is a new challenge in the UAV-ground communication. This paper investigates the trajectory planning problem in an UAV communication system, where the UAV is operated by a Ground Control Unit(GCU)to perform certain tasks in the presence of multiple jamm...     

K8E项目的管理控制评述

K8E工程是中国首次整机成套生产技术出口项目。其涉及面广、内容层次深、执行周期长、政治影响大、项目管理水平高。本文用项目的管理控制理论，对K8E工程项目的若干管理行为进行分析和评述。     

移动网络定位研究进展

定位构建人与万物和网络之间的时空桥梁,具有巨大的经济和社会价值。移动网络具有大带宽、多天线、高覆盖率等特点,在定位领域具备独特的优势,尤其在卫星信号覆盖不足的区域或多径丰富的场景,可以对卫星定位系统提供重要的补充,实现高精度、高可用性定位。从基于非参数估计和参数估计的移动网络定位关键技术、移动网络定位面临的技术挑战和移动网络定位相关标准等几个方面综述了移动网络定位的研究进展,并对移动网络定位技术趋势给出了展望。     

面向任务的单武器系统平均修复时间模型

平均修复时间(MTTR,Mean Time To Repair)作为一个重要的维修性定量指标,目前其预计方法及算法立足于大量的试验结果和经验估计.通过对任务—装备—维修组成的面向任务的队列模型的研究,将任务需求、武器系统的可靠性及维修性综合考虑,针对故障率和修复率均服从指数分布的可修系统,建立了一种基于M/G/1可修排队模型的武器系统MTTR的模型,并给出了定量预计方法.此模型符合基于可靠性基础上的维修理论的基本结论,避免了设计初期对大量维修统计数据的依赖,为订购方在装备采购中提出维修性定量的要求提供了依据.      

Assessment of the suitability of public mobile data networks for aircraft telemetry and control purposes

This paper provides a review of the state of the art of relevant work on the use of public mobile data networks for aircraft telemetry and control proposes. Moreover, it describes the characterisation for airborne uses of the public mobile data communication systems known broadly as 3G. The motivation for this study was to explore how this mature public communication systems could be used for aviation purposes. An experimental system was fitted to a light aircraft to record communication latency, line speed, RF level, packet loss and cell tower identifier. Communications was established using internet protocols and connection was made to a local server. The aircraft was flown in both remote and populous areas at altitudes up to 8500 ft in a region located in South East Queensland, Australia. Results show that the average airborne RF levels are better than those on the ground by 21% and in the order of −77 dbm. Latencies were in the order of 500 ms (1/2 the latency of Iridium), an average download speed of 0.48 Mb/s, average uplink speed of 0.85 Mb/s, a packet of information loss of 6.5%. The maximum communication range was also observed to be 70 km from a single cell station. The paper also describes possible limitations and utility of using such communications architecture for both manned and unmanned aircraft systems.