重力卫星星间高精度测距技术研究

卫卫跟踪(SST)技术是当前地球重力场测量最有价值和应用前景的方法之一.高精度星间测距系统是低低卫卫跟踪(SST-ll)重力卫星的关键有效载荷.GRACE卫星携带的K波段测距系统(KBR K Band Ranging System)是一微米量级的测距系统,通过处理高精度的星间距离和距离变化率数据,可以恢复出地球重力场.GRACE后续计划又提出了一种更高精度的激光干涉测距系统.在研究KBR及激光干涉测距系统测量原理的基础上,提出了一种KBR系统的基本结构,详细分析了两种测距系统的关键技术及国内目前的研究水平,提出了我国开展星间测距系统研究的一些建议.      

民机驾驶舱触控显示系统人机工效评估指标体系搭建研究

从人机工效基本原理出发,在对国内外适航规章和行业标准解读的基础上,结合触控技术自身特征,对触控显示系统人机工效设计的影响因素进行分析,并综合运用了改进德尔菲法和改进层次法,初步构建了民机触控显示系统人机工效评估指标体系,可为系统的设计与评估提供借鉴.     

基于5G的通导融合位置认证系统性能分析

随着无人化智能移动装备在工业、交通等安全敏感领域的普及应用，民用导航定位系统中的定位安全问题日益突出。位置认证是对终端的物理位置声明进行认证的过程，是导航定位安全技术的重要组成部分。基于第五代(5G)移动通信网络的通导融合位置认证系统具有覆盖范围广、认证精度高、用户容量大、建设运维成本低等多重优势。本文首先介绍了多基站位置认证系统的检测判决原理，提出了漏检平均距离的定义作为位置认证系统精度的量化评价指标。在此基础上，通过数值仿真分析了信号带宽、基站同步误差、信噪比对位置认证系统精度的影响，并利用5G信道模型评估了典型场景下的位置认证系统的性能。结果表明，在具备3个以上的视距基站时，基于5G的通导融合位置认证系统可以实现米级的位置认证精度。     

Ergodic sum rate for uplink NOMA transmission in satellite-aerial-ground integrated networks

The application of Non-Orthogonal Multiple Access (NOMA) technology into satellite-aerial-ground integrated networks can meet the requirements of ultra-high rate and massive connectivity for the Sixth-Generation (6G) communication systems. We consider an uplink NOMA scenario for such a satellite-aerial-ground integrated network where multiple users communicate with satellite under the help of an Unmanned Aerial Vehicle (UAV) as an aerial relay equipped with a phased array. Supposing that buffer-aided decode-and-forward protocol is adopted at the UAV relay, we first formulate an optimization problem to maximize Ergodic Sum Rate (ESR) of the considered system subject to individual power constraint and quality-of-service constraint of each user. Then, with known imperfect channel state information of each user, we propose a joint power allocation and robust Beam Forming (BF) iterative algorithm to maximize ESR for the user-to-UAV link. Besides, to take the advantages of Free-Space Optical (FSO) and millimeter Wave (mmWave) communications, we present a switch-based hybrid FSO/mmWave scheme and a robust BF algorithm for the UAV-to-satellite link to achieve higher rate. Moreover, a closed-form ESR expression is derived. Finally, the effectiveness and correctness of the proposed solutions are verified by numerical simulations, and the performance evaluation results show that the proposed solutions not only achieve performance enhancement and robustness, but also outperform the orthogonal multiple access significantly.     

荔枝树体钾素分布及累积特点

采用个体直接收获法,采果后把9年生荔枝品种妃子笑和黑叶、3年生妃子笑的根、茎、叶3个器官分成16～20个部位和组织,分别测定各个部位各个组织的生物量和钾(K)含量,并计算K累积量,以探明荔枝树体内K素分布及累积特点,为K肥施用提供依据,结果表明,K在不同器官不同部位含量是不同的,K含量在新成熟复叶柄最高,其次为老叶复叶柄、末级侧枝韧皮部,在根颈、主茎木质部、主根含量较低;荔枝枝干和根系K含量基本上是随着其粗度增加,呈下降趋势,但成年树下降幅度比幼年树的大.成年妃子笑荔枝K素累积量在叶片和枝干较多,根系K累积较少.妃子笑成年末级侧枝K素累积量占整株树K素累积量的58.7%.     

40G以太网在航电系统中的应用初探

随着飞机整体性能的提升，航电系统的发展日新月异，对总线网络提出了越来越高的要求。基于远端内存直接访问技术传输机制的以太网以其高带宽、低延时以及生态开放性的特点，在航电系统总线中逐渐得到推广。本文介绍了航电总线网络的发展，对典型的航电总线进行了对比分析，开展了10G/40GE交换工程样机的研制和测试工作，为下一代航电系统总线网络的选型提供了参考。     

Green UAV communications for 6G: A survey

Unmanned Aerial Vehicles (UAVs) have received a wide range of attention for military and commercial applications. Enhanced with communication capability, UAVs are considered to play important roles in the Sixth Generation (6G) networks due to their low cost and flexible deployment. 6G is supposed to be an all-coverage network to provide ubiquitous connections for space, air, ground and underwater. UAVs are able to provide air-borne wireless coverage flexibly, serving as aerial base stations for ground users, as relays to connect isolated nodes, or as mobile users in cellular networks. However, the onboard energy of small UAVs is extremely limited. Thus, UAVs can be only deployed to establish wireless links temporarily. Prolonging the lifetime and developing green UAV communication with low power consumption becomes a critical challenge. In this article, a comprehensive survey on green UAV communications for 6G is carried out. Specifically, the typical UAVs and their energy consumption models are introduced. Then, the typical trends of green UAV communications are provided. In addition, the typical applications of UAVs and their green designs are discussed. Finally, several promising techniques and open research issues are also pointed out.     

Influence of alumina abrasive tool wear on ground surface characteristics and corrosion properties of K444 nickel-based superalloy

K444 nickel-based superalloy is an important material to manufacture the gas turbine due to its excellent mechanical properties at high temperatures and corrosion resistance. Currently,grinding is the mostly used method for the surface finish of the K444 alloy components. However,few studies worked on the effects of the abrasive tool wear on the ground surface characteristics and corrosion properties of K444 alloy. This study uses two different-type alumina abrasive tools, i.e.,white alumina(WA)...     

高精度星间测距与超稳振荡器研究

高精度K频段微波星间测距系统（KBR）采用双路微波测距技术,测量精度可达到1μm／s,是地球重力场测量卫星的三大有效载荷之一。作为整个系统时间基准的超稳定振荡器（USO）,是实现KBR微米级测量精度的关键。文章在研究KBR测距技术的基础上,对USO进行了研究和设计,研制成功的USO的短期频率稳定度达到了5×10^-13／s（Allan方差）,达到了指标要求。     

5G微基站环境下GNSS接收机性能及观测质量分析

我国已全面进入5G时代，为研究5G微基站电磁环境对全球卫星导航系统（GNSS）接收机工作性能及观测数据质量的影响，基于自主建设差分基准站的零基线观测数据，采用静态相对定位方法，通过观测数据质量分析、载波与伪距的双差残差序列、对比相对静态定位结果，综合评估5G微基站对GNSS接收机工作性能及观测数据质量的影响。实验表明：当前环境下，GNSS差分基准站及接收机处于近距离建设的5G微基站时，载波相位观测噪声变化范围为5cm，伪距观测噪声变化范围为15cm，零基线测试结果变化范围为1mm。在实验距离内，5G微基站对于GNSS接收机工作性能及数据观测质量影响较小，可以忽略。