相对论性离子束（环束）流引起的电磁不稳定性

在相对论性框架下，研究了冷离子流产生的右旋共振模，非共振模电磁不稳定性的特征结果表明，非共振模不稳定性增长率受离子流初始参数影响较大，而右旋共振模的增长率则受离子流初始参数影响较小。此结果可应用于太阳高能离子流通过低日冕区和地球磁层辐射带俘获的高能质子情形。     

论文献生产

本文主要从经济学、社会学和角度讨论文献的生产，认为一次文献生产只有相对的“不确定性”，没有绝对的“不确定性”；文献生产分为两个阶段，其中第一阶段具有决定性意义。在此认识基础上，文章还分析了文献生产的劳动消耗和劳动对象的特点、性质。     

一种基于混合规则的作业车间计划调度方法

针对多品种小批量生产车间计划调度存在的复杂度高、实用性差等问题,在分析车间计划调度相关的任务、资源和约束等要素的基础上,提出了一种基于混合规则的计划调度编制算法,该算法综合考虑了零件差异性、工艺差异性、设备差异性、以及交货期约束等因素,使得该方法具有可行性高、实用性强等特点,较好地满足了离散制造车间的实际需求.     

Analysis of total visual and CCD V-broadband observations of Comet C/1995 O1 (Hale-Bopp): 1995–2001

We developed a general method for determination of water production rates from groundbased visual observations and applied it to Comet Hale–Bopp. Our main objective is to extend the method to include total visual magnitude observations obtained with CCD detector and V filter in the analysis of total visual magnitudes. We compare the CCD V-broadband careful observations of Liller [Liller, W. Pre-perihelion CCD photometry of Comet 1995 O1 (Hale-Bopp). Planet. Space Sci. 45, 1505–1513, 1997; Liller, W. CCD photometry of Comet C/1995 O1 (Hale-Bopp): 1995–2000. Int. Comet Quart. 23(3), 93–97, 2001] with the total visual magnitude observations from experienced international observers found in the International Comet Quarterly (ICQ) archive. A data set of ∼400 CCD observations covering about the same 6 years time span of the ∼12,000 ICQ selected total visual magnitude observations were used in the analysis. A least-square method applied to the water production rates, yields power laws as a function of the heliocentric distances for the pre- and post-perihelion phases. The average dimension of the nucleus as well as its effective active area is determined and compared with values published in the literature.     

也谈"军事计量测量标准价值分析"

就价值分析的内涵和操作要点,以及价值分析在计量领域的应用等方面,对本刊曾发表过的"军事计量测量标准价值分析"一文中的某些提法和分析提出几点不同的看法.     

Excel2000在工程造价管理中的应用

Excel2000主要是用来管理、组织和处理各种各样的数据.本文主要介绍了Excel2000在工程造价管理方面发挥的功能,从而方便地减轻了繁杂的计算工作问题.     

一种基于极大似然估计的信号盲抽取算法

针对盲信号抽取问题,根据极大似然估计原理,给出一种基于极大似然估计的分步盲抽取算法。根据信号不同的延时特性确立抽取信号,完成第一步抽取。由于初步抽取信号存在噪声污染,根据极大似然估计,估计抽取信号的概率密度函数,确立优化代价函数,利用自然梯度方法进行优化,确立最终抽取向量迭代方式,完成对抽取信号优化处理。通过仿真证明算法具有良好的收敛性和抗噪性,在SNR17 d B时,抽取信号与源信号的相似度达到95%。     

基于偏最小二乘回归分析的装备研制费用估算方法及应用

介绍了寿命周期费用的概念以及各阶段分布情况;针对经典回归分析的不足,采用偏最小二乘回归分析对某装备样本数据进行分析建模;建立了研制费用与几个相关指标的回归方程,并将估算结果与经典的回归分析进行对比,验证模型的合理性。该模型能较好地反映了费用与各指标之间的关系,对后续寿命周期费用的分析与控制有一定的意义。     

机型成本预测的因素分析法

根据管理会计把机型成本要素分解为固定成本、半变动成本和变动成本，对航空公司机型的航空运量作出预测，就可对机型作出预测。     

Design-to-Cost Applied Within an Integrated System Model

In an environment of declining financial budgets for space projects, new approaches - such as Design-To-Cost - are being implemented to improve today's satellite design processes. Using an example of a current mission (the power subsystem of the Solar Probe spacecraft) under study at NASA's Jet Propulsion Laboratory, the main part of the paper discusses an Integrated System Model (structured into a performance model, a cost model, and an effectiveness model) that is part of a model-based design process used to perform cost-effectiveness trades. A simulation tool is used during the first step to size the components of the power subsystem, and then simulate its performance during operation. The determined dimensions are transferred into an EXCEL^TM-spreadsheet and linked to the components' costs. With a cost accounting tool that combines cost estimating relationships with the Work Breakdown Structure of the power subsystem, the life-cycle cost of each alternative design concept is computed. To determine the cost-risk of the different design alternatives for each component, cost probability distributions are introduced. By performing Monte-Carlo simulations, cost sensitivities are revealed. In the next step of the trade study process, the effectiveness of the alternatives is analyzed. Having determined cost and effectiveness, estimates can be made for where the different alternatives lie in the design space. The last part of the paper identifies the main drivers for the spacecraft's performance and cost. Finally it is shown how the mission design benefited from the Integrated System Model and from the application of Design-To-Cost.