ISO/IEC 17025与ISO/IEC导则25的比照分析

本文主要介绍ISO/IEC 170251999的由来，及其与ISO9001、ISO9002的关系；ISO/IEC 17025的组成和构架以及与ISO/IEC导则25的对照、比较和分析。以帮助读者了解ISO/IEC 170251999与导则25的异同,从而有助于推进ISO/IEC 17025的实施。     

飞机最佳航路爬升时机研究

确定飞机最佳航路爬升时机对提高飞行安全与效率有着重要意义.以北京区域管制的穿越间隔标准为例,根据几种典型航空器型号、起飞重量、不同高度层等相关因素,编程计算穿越高度层前所需的间隔,再考虑飞机调速情况做出修正,最终确定了航路飞行阶段飞机的最佳爬升时机.研究结果可提高管制员工作效率、增加空中交通流量,并可用于容量评估及空域规划研究.     

飞机电源系统的重要标准与系统优化

解析飞机电源系统安全标准和电源接口标准,研究飞机电源系统结构及关键组件性能要求,以及飞机系统电源接口和电源配电系统设计规则,论述飞机电源系统和配电系统优化的工程方法。     

坚持标准 严格要求 做好大学生党员发展工作

把优秀的大学生凝聚到党的队伍和事业中来,是高等教育在全面建设小康社会中的主要任务。高校是人才培养的摇篮,也是社会主义建设可持续发展战略的重要一环。为此,高校学生党建工作要努力成为贯彻“三个代表”重要思想的组织者、推动者和实践者,必须从党和国家兴旺发达,长治久安的高度,充分认识到在高校大学生中发展党员工作的重大意义。     

焊接导管轨迹焊新工艺

本文阐述了航空发动机导管的焊接新工艺——轨迹焊及其特点、所用的设备、工艺参数、工艺要点、以及焊接过程中易于出现的缺陷和排除方法。     

美俄日等国联手建造国际空间站

简要回顾了国际空间站计划的发展。重点描述了“阿尔法”空间站的基本构成及计划现状。     

What next for China in space after Shenzhou?

This article discusses China's ambitions in space now that it seems set to pursue human spaceflight. It suggests that, after sending its astronauts into space, completing orbital rendezvous-docking operations and placing a space lab in orbit, China will focus on the Moon with its Chang’e project. As an emerging space power, China will play a more active role in the international space community through collaboration in areas such as lunar exploration, science operations on the International Space Station, the Galileo Global Navigation Satellite System and the International Geosphere–Biosphere Program (IGBP). In particular, China will vigorously explore new opportunities to expand its cooperation with Russia and ESA to counteract Washington's attempt at containment. Meanwhile, Beijing will continue to follow its self-reliance principle to go its own way in space.     

Lessons learned from Mir--a payload perspective

Among the principal objectives of the Phase 1 NASA/Mir program were for the United States to gain experience working with an international partner, to gain working experience in long-duration space flight, and to gain working experience in planning for and executing research on a long-duration space platform. The Phase 1 program was to provide the US early experience prior to the construction and operation of the International Space Station (Phase 2 and 3). While it can be argued that Mir and ISS are different platforms and that programmatically Phase 1 and ISS are organized differently, it is also clear that many aspects of operating a long-duration research program are platform independent. This can be demonstrated by a review of lessons learned from Skylab, a US space station program of the mid-1970s, many of which were again “learned” on Mir and are being “learned” on ISS. Among these are optimum crew training strategies, on-orbit crew operations, ground support, medical operations and crew psychological support, and safety certification processes.     

计算机图形系统发展简述

飞机座舱显示控制系统是航空电子系统的核心子系统,其技术基础之一是计算机图形学。本文简要介绍了计算机图形学的发展历史及其标准,重点分析了计算机图形系统从专业图形工作站到PC机到嵌入式设备的发展历程,可作为研究机载嵌入式图形系统的理论背景。     

基于解耦控制的飞机飞行的控制方法仿真研究

深入地研究了基于状态空间法的解耦控制理论，并用此理论对飞机的纵向和横航向的某一飞行状态进行了仿真，得出了既可解耦也可以改善系统响应性能的控制方法。仿真中应用局部解耦的方法构造满足解耦控制条件的多变量系统，局部解耦控制有利于解耦控制方法在飞行控制系统中的应用。