Aerodynamic characteristics of store during lateral jet assisted separation from cavity using free drop technique

Aimed at the problem of store separation from internal cavity, this paper innovatively puts forward a separation scheme of using lateral jet to assist store safe separation. The jet ensures that the store is continuously subjected to down head moment during separation, so as to ensure safe separation. The wind tunnel free drop test technique with lateral jet is established, which can ensure that there is no support interference in the motion process of the store and more truly simulate the motio...     

基于边界层燃烧方法的宽速域飞行器内流道减阻研究

为了降低宽速域飞行器的内流阻力，基于边界层燃烧方法，分析了系列进口马赫数条件下二维扩散段总阻力中摩阻和压阻的特性，研究了不同进口马赫数下摩阻和压阻分量对总减阻的贡献、燃烧影响区域和壁面热流密度，探讨了喷射参数对减阻效果的影响，探索了边界层燃烧方法在典型混压式进气道中的减阻应用。结果表明，随着进口马赫数的增加，总阻力中摩阻分量随之增加；边界层燃烧对摩阻和压阻减阻的机理有所不同，壁面附近流场特性变化使得摩擦系数减小，燃烧局部增压对壁面产生的增推效果使得压力系数减小；从总内阻减阻百分比看，在相同燃料/空气当量比下，低马赫数工况下边界层燃烧减阻效果不如高马赫数工况，且在低马赫数工况下，喷嘴附近壁面热流密度会显著增加；在本文所研究的参数范围内，摩阻和压阻对当量油气比更为敏感，而对喷射方向和喷射速度不敏感。     

考虑界面损伤的立式贮存药柱结构完整性研究

为了进一步结合实际分析固体火箭发动机药柱在立式贮存条件下的结构完整性，考虑推进剂/衬层界面损伤模式在复杂应力条件下具有多样性。以某型固体火箭发动机为例，与常规将衬层设置为粘接单元相比，模型在推进剂与绝热层之间设置粘接接触。对固体火箭发动机在立式贮存环境时经历固化降温、充气内压和重力载荷联合作用下有无界面损伤时的发动机进行仿真分析。结果表明:界面损伤的存在导致推进剂/绝热层界面这个薄弱环节更危险；该型固体火箭发动机药柱在充气内压增大过程中在人工脱粘层根部部位应力呈先增大后减小趋势；在充气内压达到0.085MPa之前，推进剂与绝热层之间考虑界面损伤时，推进剂在垂直于轴向的靠近人工脱粘层根部部分更容易损伤，之后则推进剂垂直于轴向的初始点更容易损伤。该结论可以为固体火箭发动机结构完整性精确仿真提供一定的指导。     

Advanced analytical model for orbital aerodynamic prediction in LEO

The growing interest in low earth orbit (LEO) applications demands for accurate modeling of orbital aerodynamics. But classical analytical models of aerodynamic coefficients in free molecule flow, such as the Sentman’s model, Schamberg’s model and Schaaf-Chambre model, were built upon over simplistic gas-surface interaction models, which degrade the fidelity of aerodynamic prediction. This work presents a new analytical model of orbital aerodynamic coefficients based on the state-of-the-art Cercignani–Lampis–Lord (CLL) gas-surface interaction model, where lobular quasi-specular scattering pattern and separate accommodation degree for different velocity components can be well captured. A key component of the new model is a rigorous function approximation solution of the reflected normal momentum flux based on the CLL model which is derived for the first time and is validated within 1% for any hypothermal flow and surface accommodation conditions. Closed-form analytical solutions of aerodynamic coefficients for simple convex geometries are obtained and exhibit high accuracy (within 0.1%) in typical LEO scenarios. The new analytical model surpasses the classical models in some important aspects, such as overcoming the diffuse scattering hypothesis constraint, considering the variation of normal momentum exchange with the surface incidence angle and being applicable in any hypothermal flow situation. In virtue of the advanced CLL model and feasibility of coupling with the panel method technique, the new analytical model is promising to provide more accurate predictions on the orbital aerodynamic coefficients for LEO applications.