两凸平面相贯立体的隐藏线消去法

本文介绍了一种消去两相贯凸平面立体的隐藏线算法。首先利用外法线法单体消隐,然后用线与面比较法作组合消隐计算,逐一确定各个单体上可见棱线在组合体上的可见线段,最后显示或绘制所有的可见棱线段和两体的可见交线,得到消隐后的立体图。本法信息输入量较小,功能较强,不但适用于两相贯的凸平面立体的消隐,而且也适用于两迭加的凸平面立体的消隐。本程序还适用于两体具有共面的情况。     

基于卫星观测数据的弹道导弹初始状态估计

利用卫星探测数据对大气层外飞行的弹道导弹弹道进行估计。在极大似然估计中,由于卫星探测导弹运动的可观测性较差,使初始点估计变得十分病态,传统的Gauss Newton迭代算法不再适用,而采用较为复杂Levenberg Marquardt算法,分别对单颗卫星和两颗卫星的情况进行了Monte Carlo仿真,得到了各自的归一化残差测量误差(代价函数),结果表明该算法有效。     

月面上升的轨迹优化与参数分析

面向月球采样返回任务分析需求,对月面上升段的轨迹优化及燃料消耗影响因素进行了研究。基于上升器运动模型,建立以燃料消耗最优为目标考虑入轨约束的轨迹优化模型,通过Gauss伪谱法和序列二次规划求解上升过程最优推力方向。改变运动模型中的初始推重比、入轨约束中的目标轨道参数,根据轨迹优化结果得到对应的燃料消耗,分析了这些因素对上升器燃料消耗的影响。针对上升器非共面起飞的问题,提出了上升偏航、升交点调整、倾角调整3种方案,从燃料消耗的角度分析了各方案的适用情况,为未来工程应用提供参考。     

基于星体边缘和轨道投影的光学自主导航算法

针对光学导航中存在的通过星体（球体）图像部分边缘点拟合椭圆参数计算轨道参数产生中间误差的问题,提出利用边缘点映射轨道参数的直接投影模型,避免拟合椭圆参数的方法。在小孔成像模型基础上,建立了边缘点与轨道参数的直接投影数学模型,对其映射过程进行了理论推导,利用列文伯格-马夸尔特迭代算法进行求解轨道参数。用实际探测器以及镜头参数进行数值仿真验证,结果表明：该方法在相同边缘点的条件下,轨道精度可以达到5‰。与传统方法相比,这种方法避免了椭圆的拟合过程,减少了引入中间误差过程。     

A modern robust approach to remotely estimate chlorophyll in coastal and inland zones

The chlorophyll concentration of a water body is an important proxy for representing the phytoplankton biomass. Its estimation from multi or hyper-spectral remote sensing data in natural waters is generally achieved by using (i) the waveband ratioing in two or more bands in the blue-green or (ii) by using a combination of the radiance peak position and magnitude in the red-near-infrared (NIR) spectrum. The blue-green ratio algorithms have been extensively used with satellite ocean color data to investigate chlorophyll distributions in open ocean and clear waters and the application of red-NIR algorithms is often restricted to turbid productive water bodies. These issues present the greatest obstacles to our ability to formulate a modern robust method suitable for quantitative assessments of the chlorophyll concentration in a diverse range of water types. The present study is focused to investigate the normalized water-leaving radiance spectra in the visible and NIR region and propose a robust algorithm (Generalized ABI, GABI algorithm) for chlorophyll concentration retrieval based on Algal Bloom index (ABI) which separates phytoplankton signals from other constituents in the water column. The GABI algorithm is validated using independent in-situ data from various regional to global waters and its performance is further evaluated by comparison with the blue-green waveband ratios and red-NIR algorithms. The results revealed that GABI yields significantly more accurate chlorophyll concentrations (with uncertainties less than 13.5%) and remains more stable in different waters types when compared with the blue-green waveband ratios and red-NIR algorithms. The performance of GABI is further demonstrated using HICO images from nearshore turbid productive waters and MERIS and MODIS-Aqua images from coastal and offshore waters of the Arabian Sea, Bay of Bengal and East China Sea.     

空间低温杜瓦瓶凯夫拉支撑结构多约束优化设计

采用新型凯夫拉纤维作为某空间用小型低温杜瓦瓶的支撑材料，在验证其力学性能的基础上，设计了杜瓦瓶的支撑结构，建立了一种新的热力学耦合优化模型，给出支撑结构固有频率、热应力及发射环境下的约束条件，通过一种“离散点加密”新约束优化法计算出了支撑结构满足约束条件范围内的要求的最优设计参数。     

Validation of non-linear split window algorithm for land surface temperature estimation using Sentinel-3 satellite imagery: Case study; Tehran Province,Iran

In recent years, land surface temperature (LST) has become critical in environmental studies and earth science. Remote sensing technology enables spatiotemporal monitoring of this parameter on large scales. This parameter can be estimated by satellite images with at least one thermal band. Sentinel-3 SLSTR data provide LST products with a spatial resolution of 1 km. In this research, direct and indirect validation procedures were employed to evaluate the Sentinel-3 SLSTR LST products over the study area in different seasons from 2018 to 2019. The validation method was based on the absolute (direct) evaluation of this product with field data and comparison (indirect) evaluation with the MODIS LST product and the estimated LST using the non-linear split-window (NSW) algorithm. Also, two emissivity estimation methods, (1) NDVI thresholding method (NDVI-THM) and (2) classification-based emissivity method (CBEM), were used to estimate the LST using the NSW method according to the two thermal bands of Sentinel-3 images. Then, the accuracy of these methods in estimating LST was evaluated using field data and temporal changes of vegetation, which the NDVI-THM method generated better results. For indirect evaluation between the Sentinel-3 LST product, MODIS LST product, and LST estimated using NSW, four filters based on spatial and temporal separates between pairs of pixels and pixel quality were used to ensure the accuracy and consistency of the compared pairs of a pixel. In general, the accuracy results of the LST products of MODIS and Sentinel-3, and LST estimated using NSW showed a similar trend for LST changes during the seasons. With respect to the two absolute and comparative validations for the Sentinel-3 LST products, summer with the highest values of bias (?1.24 K), standard deviation (StDv = 2.66 K), and RMSE (2.43 K), and winter with the lowest ones (bias of 0.14 K, StDv of 1.13 K, and RMSE of 1.12 K) provided the worst and best results for the seasons in the period of 2018–2019, respectively. According to both absolute and comparative evaluation results, the Sentinel-3 SLSTR LST products provided reliable results for all seasons on a large temporal and spatial scale over our studied area.     

折叠式变体飞行器轨迹优化及控制分析

针对临近空间高超声速飞行器存在的问题，设计了一种折叠翼飞行器，可以通过折叠机翼来适应各种飞行状态，保持最优的气动特性。并针对临近空间滑翔式高超声速的特点，采用高斯伪谱法对固定翼飞行器和折叠翼飞行器的轨迹优化，通过将折叠翼飞行器与传统固定翼飞行器在射程能力、规避热流能力方面进行对比，提出了一种综合目标的轨迹优化思想。设计的折叠翼飞行器相比传统固定翼飞行器性能更加优越，更适合临近空间环境，提高了17.67%的航程，减少了热流率峰值的35.72%，并通过控制系统的设计和仿真加以验证，仿真结果表明变体飞行器机动能力相比固定翼飞行器有了显著的提高。     

基于数字孪生的智能脉动管控

为提升飞机总装脉动生产线智能化水平,开展了基于数字孪生的智能脉动管控研究。基于数字孪生五维模型理论构建了飞机总装脉动生产线数字孪生应用架构,从反应式计划调度、物流精准配送、智能作业指导、产线健康监视、资源迭代优化配置5个方面开展了技术研究,为复杂产品装配的智能制造应用提供参考。     

基于伴随方法的单级低速压气机气动设计优化

采用梯度方法对某型4.5级压气机最后级进行气动设计优化研究，梯度由连续伴随方法计算确定，多排伴随方程采用伴随掺混面模型进行数值求解。首先，采用基于经验修正的初步设计方法设计带进口导叶的4.5级低速、低压缩比压气机的原始气动外形。之后，在压气机近失速工况对最后级静子叶片进行伴随气动设计优化，通过优化叶型和安装角降低流动损失，目标函数定义为加权求和形式的熵增和流量偏差，优化中对流量进行约束。最后，开展基于伴随方法的多工况气动设计优化研究，改善两个不同转速条件下最后级的气动性能。优化结果表明，基于伴随方法的多排气动设计优化可以通过改变叶片气动外形提升多排全工况气动性能。