A review of topology optimization for additive manufacturing: Status and challenges

Topology optimization was developed as an advanced structural design methodology to generate innovative lightweight and high-performance configurations that are difficult to obtain with conventional ideas. Additive manufacturing is an advanced manufacturing technique building as-designed structures via layer-by-layer joining material, providing an alternative pattern for complex components. The integration of topology optimization and additive manufacturing can make the most of their advantages and potentials, and has wide application prospects in modern manufacturing. This article reviews the main content and applications of the research on the integration of topology optimization and additive manufacturing in recent years, including multi-scale or hierarchical structural optimization design and topology optimization considering additive manufacturing constraints. Meanwhile, some challenges of structural design approaches for additive manufacturing are discussed, such as the performance characterization and scale effects of additively manufactured lattice structures, the anisotropy and fatigue performance of additively manufactured material, and additively manufactured functionally graded material issues, etc. It is shown that in the research of topology optimization for additive manufacturing, the integration of material, structure, process and performance is important to pursue high-performance, multi-functional and lightweight production. This article provides a reference for further related research and aerospace applications.     

Hypersonic reentry trajectory planning by using hybrid fractional-order particle swarm optimization and gravitational search algorithm

This paper proposes a novel hybrid algorithm called Fractional-order Particle Swarm optimization Gravitational Search Algorithm (FPSOGSA) and applies it to the trajectory planning of the hypersonic lifting reentry flight vehicles. The proposed method is used to calculate the control profiles to achieve the two objectives, namely a smoother trajectory and enforcement of the path constraints with terminal accuracy. The smoothness of the trajectory is achieved by scheduling the bank angle with the aid of a modified scheme known as a Quasi-Equilibrium Glide (QEG) scheme. The aerodynamic load factor and the dynamic pressure path constraints are enforced by further planning of the bank angle with the help of a constraint enforcement scheme. The maximum heating rate path constraint is enforced through the angle of attack parameterization. The Common Aero Vehicle (CAV) flight vehicle is used for the simulation purpose to test and compare the proposed method with that of the standard Particle Swarm Optimization (PSO) method and the standard Gravitational Search Algorithm (GSA). The simulation results confirm the efficiency of the proposed FPSOGSA method over the standard PSO and the GSA methods by showing its better convergence and computation efficiency.     

智能天地一体化网络的卫星跟踪测控技术综述

随着卫星互联网和我国航天测控技术的不断进步,航天测控网络朝着智能化、一体化的方向发展,在自主测控、资源分配等方面进展良好。因此,建立智能天地一体化的航天测控网是我国航天未来发展的重要目标。针对智能航天测控网中的跟踪测轨、遥测和遥控三个方面,分别介绍了相关原理与技术。同时,结合CCSDS提出的空间数据链路标准协议详细介绍了TM、TC、AOS、Proximity-1以及USLP标准,分析了不同标准所使用的技术与实际应用。本文从数据链路层和物理层的角度介绍了智能航天测控系统的工作原理及技术要求,为我国智能天地一体化卫星测控通信网的研究提供参考并予以展望。     

LDPC码在联合信源信道编码中的应用

介绍了LDPC码的编译码原理,建立了一种应用LDPC码的联合信源信道编码图像传输系统结构,对其性能进行了分析,并给出了LDPC码在联合信源信道编码中应用的进一步研究方向。     

一种高升力系统卡位信号的算法设计

提出了一种高升力系统卡位信号的算法。用于将襟/缝翼控制手柄上的传感器信号转换成高升力系统计算机的命令卡位信号。本算法相较于传统的算法有两处改进,第一处是在手柄卡位信号的计算中增加了信号有效性的确认环节,可以避免当手柄短暂通过手柄卡位信号无效的区域时,产生无效的卡位信号,继而对后续的命令卡位信号计算造成影响。第二处是在命令卡位信号的计算中加入将两个计算机设为主-备关系,并进行表决计算的算法环节,避免了传统算法中由于信号传输延时导致不同通道间输出的命令卡位不一致,从而导致襟/缝翼半速运动的现象发生。本算法可以使最终输出的四个通道的命令卡位信号正确且一致,并已通过实验验证其鲁棒性较强,对民用飞机高升力系统设计有一定的指导作用。     

基于Optistruct的结构静动力拓扑优化设计

基于Optistruct平台,研究了二维平面薄板及三维结构的静力、动力以及静动力联合的拓扑优化,给出了典型结构的算例,对比了优化参数取值不同时所对应的优化结果,探讨了优化过程中的网格依赖性以及拓扑优化的效率等问题.     

基于SVM算法的虚假航迹识别

针对云雨杂波和主被动干扰导致多雷达传感器产生虚假目标航迹的问题,利用支持向量机(SVM)算法的自主学习能力,通过构建基于数据驱动的判别模型进行虚假航迹识别。针对航迹起始得到的目标潜在航迹,利用人工智能数据驱动、自学习的特点,设计了SVM算法。通过对已标记真假的目标航迹样本进行离线学习,形成虚假航迹识别的SVM分类器,实现了基于数据驱动的判别模型代替先验知识规则约束的固定模型,并在工程应用中,利用SVM分类器在线识别虚假航迹,完成实时剔除。通过实测雷达数据实验验证,该算法的目标虚假航迹准确率高达95%以上,完全满足实际的工程应用需求。相比基于阈值或规则进行硬性判断的传统虚假航迹识别方法,所提出的算法不仅提高了准确率,还具有较高的实时性,能够适应复杂多变的杂波环境,在实际应用中具有更强的适应性和实用性。因此,提出的基于SVM算法的虚假航迹识别方法对于密集杂波场景下的虚假航迹剔除问题具有显著的实际应用价值。     

一种中心型间断有限元MMALE方法

针对多介质可压缩流体动力学问题,提出了一种单元中心型二维MMALE(Multi-Material Arbitrary Lagrangian-Eulerian)方法.在拉氏步,流体力学方程组采用中心型间断有限元方法求解.对于混合网格,采用Tipton压力松弛模型更新物理量,用等参坐标法更新物质中心点坐标.界面重构采用一种...     

最小数据丢失量的地月中继卫星任务调度研究

月球背面的探测器必须依靠地月中继卫星进行数据传输与通信。地月中继任务包括实时性任务和延迟容忍类任务,如数传任务。当探测器等待传输的数据量超出用户存储容量时,延迟容忍类任务会由于探测器本地存储资源不足和地月中继卫星天线资源受限而无法完成,导致任务数据丢失,所以需要设计一种合理的地月中继任务调度策略,提高地月中继卫星的资源利用率,减少数据的丢失。对地月中继卫星任务调度进行了研究,在分析地月中继卫星数传任务的特点及用户的存储限制的基础上,以最小化数据丢失量为优化目标,建立了地月中继卫星任务调度模型,并设计了一种基于离散烟花算法（DFWA）的地月中继卫星任务调度算法。仿真数据分析表明,基于离散烟花算法的地月中继卫星任务调度算法在求解结果上优于遗传算法,是一种合理、有效的调度方法。     

eLoran系统ASF网格应用算法研究

ASF网格是提高增强型罗兰（Enhanced Long Range Navigation,eLoran）系统精度的重要方法。根据所在网格四个顶点的附加二次时延（Added Secondary Factor,ASF）值通过网格应用算法得到待测试点的ASF值,一定程度上比公式计算的ASF值更准确。在计算过程中,用户四个顶点ASF值的测量误差会传递给用户,同时内插算法本身也会引入误差,此时内插算法的选择尤为重要。本文通过仿真、分析比较几种常用的内插算法,得出结论：反距离插值算法引入的误差最大,双线应插值算法引入的误差最小,而且误差呈现一定层次感,网格从内到外误差逐渐减小。