自行开发的图形组件在航空发动机设计集成系统中的应用

结合具体开发的图例,阐述了自行开发、应用于航空发动机设计集成系统的图形组件的功能、应用情况和关键技术。     

平面交叉口混合交通流建模与仿真

在混合交通条件下，交通参与者成分复杂，各种交通方式速度各异，交通冲突频繁。特别是在交叉口机动车与非机动车相互干扰，带来了安全、效率、污染等多方面问题。本文首先介绍我国混合交通流的特点，然后对自行车个体微观行为进行定性的描述分析。通过对实际信号交叉口的调查研究，和对机动车流率与非机动车到达与释放规律的模型建立与定量计算。分析总结出平面交叉口机非干扰的一般规律和冲突避让原则。根据实测数据，结合视频处理和统计软件的使用通过计算直行与左转非机动车换算系数，提出了改进的机动车延误时间模型，并通过使用VISSIM3．6进行微观仿真验证了模型的有效性。     

Optimization of entry-vehicle shapes during conceptual design

During the conceptual design of a re-entry vehicle, the vehicle shape and geometry can be varied and its impact on performance can be evaluated. In this study, the shape optimization of two classes of vehicles has been studied: a capsule and a winged vehicle. Their aerodynamic characteristics were analyzed using local-inclination methods, automatically selected per vehicle segment. Entry trajectories down to Mach 3 were calculated assuming trimmed conditions. For the winged vehicle, which has both a body flap and elevons, a guidance algorithm to track a reference heat-rate was used. Multi-objective particle swarm optimization was used to optimize the shape using objectives related to mass, volume and range. The optimizations show a large variation in vehicle performance over the explored parameter space. Areas of very strong non-linearity are observed in the direct neighborhood of the two-dimensional Pareto fronts. This indicates the need for robust exploration of the influence of vehicle shapes on system performance during engineering trade-offs, which are performed during conceptual design. A number of important aspects of the influence of vehicle behavior on the Pareto fronts are observed and discussed. There is a nearly complete convergence to narrow-wing solutions for the winged vehicle. Also, it is found that imposing pitch-stability for the winged vehicle at all angles of attack results in vehicle shapes which require upward control surface deflections during the majority of the entry.     

应用模糊变权的启发式搜索进行飞行轨迹优化

回顾了军机轨迹优化问题的提出及研究历史，介绍了几种主要方法的特点，特别是启发式搜索算法应用于飞行轨迹优化问题时存在的主要问题。提出为了得到较好的近优路径而采取的模糊变权处理方法。通过计算不同加权下解的情况，说明模糊变权方法是使加权随具体情况作相应调整的有效手段，为提高飞行路径规划系统的有效性开辟了一个新思路。     

基于特征模型的火箭发动机伺服控制系统设计

以新型大推力火箭发动机为研究对象,提出了基于特征模型的伺服系统控制器设计方法。首先,介绍了特征建模理论并讨论了特征模型参数范围;其次,采用人工蜂群算法实时估计火箭发动机伺服系统特征模型参数,使其满足特征模型输出与实际系统输出特性等价条件;最后,使用黄金分割自适应控制律保证系统在参数估计过程中的闭环稳定性,同时引入前馈跟踪控制律,逻辑积分控制律和逻辑微分控制律使伺服控制系统快速、精确跟踪线位移指令并改善动态性能。仿真结果表明,设计的火箭发动机伺服控制系统指令跟踪精度高,动态特性良好,鲁棒性强。     

Improved NSGA-II Multi-objective Genetic Algorithm Based on Hybridization-encouraged Mechanism

To improve performances of multi-objective optimization algorithms, such as convergence and diversity, a hybridization- encouraged mechanism is proposed and realized in elitist nondominated sorting genetic algorithm （NSGA-Ⅱ）. This mechanism uses the normalized distance to evaluate the difference among genes in a population. Three possible modes of crossover operators--＂Max Distance＂, ＂Min-Max Distance＂, and ＂Neighboring-Max＂--are suggested and analyzed. The mode of ＂Neighboring-Max＂, which not only takes advantage of hybridization but also improves the distribution of the population near Pareto optimal front, is chosen and used in NSGA-Ⅱ on the basis of hybridization-encouraged mechanism （short for HEM-based NSGA-Ⅱ）. To prove the HEM-based algorithm, several problems are studied by using standard NSGA-Ⅱ and the presented method. Different evaluation criteria are also used to judge these algorithms in terms of distribution of solutions, convergence, diversity, and quality of solutions. The numerical results indicate that the application of hybridization-encouraged mechanism could effectively improve the performances of genetic algorithm. Finally, as an example in engineering practices, the presented method is used to design a longitudinal flight control system, which demonstrates the obtainability of a reasonable and correct Pareto front.     

一种高效的基于可靠性的多学科设计优化方法(英文)

Design for modem engineering system is becoming multidisciplinary and incorporates practical uncertainties; therefore, it is necessary to synthesize reliability analysis and the multidisciplinary design optimization （MDO） techniques for the design of complex engineering system. An advanced first order second moment method-based concurrent subspace optimization approach is proposed based on the comparison and analysis of the existing multidisciplinary optimization techniques and the reliability analysis methods. It is seen through a canard configuration optimization for a three-surface transport that the proposed method is computationally efficient and practical with the least modification to the current deterministic optimization process.     

电火花加工计算机辅助工艺过程设计系统

介绍电火花计算机辅助工艺过程设计系统（ＣＡＰＰＳ），用于为一个给定目标选择最佳操作。同时，还考虑了其它的会影响ＥＤＭ加工过程的加工方法（如铣削等）。系统的输入信息是在已有的ＣＡＤ信息的基础上产生的基于ＣＡＰＰ特征的工件描述。每个特征类对应于一个特定的一般工艺规程，并由系统对其进行评价，然后基于最低成本的原则，计算出最优工艺规程。同时还介绍了一种计算工时的通用方法。     

基于遗传算法的地磁匹配搜索策略

为降低导航成本,提出仅利用磁测计和里程计的地磁场匹配定位方法.为解决搜索空间过大的问题,提出以遗传算法在匹配区域搜索可能路径的方法.该方法以相关性度量作为适应度函数,交叉与变异仅针对点列的相对关系完成,提出用局部适应度函数自适应调整交叉概率与变异概率.仿真结果表明,该方法可以有效完成地磁匹配导航中任意形状路径的匹配.     

一种源包和虚拟信道相结合的AOS调度算法

针对目前高级在轨系统(AOS)应用中遥测调度算法大多没有同时支持源包和虚拟信道2级调度的问题,提出一种基于AOS遥测源包调度和虚拟信道调度相结合的算法,实现同时对源包调度和虚拟信道调度层面的支持。针对源包调度,提出一种基于源包刷新率的动态优先级调度算法,以保证实时数据及时下传。针对虚拟信道调度,提出一种采用最重要(VIP)/同步/异步相结合的3级调度,保证信道的合理分配利用。分别采用源包调度策略、虚拟信道调度策略和文章提出的算法策略,对某航天器下行数据的平均时延进行仿真。仿真结果表明:文章提出算法策略的平均时延,低于源包调度策略和虚拟信道调度策略,比单独采用源包调度或者虚拟信道调度的算法具有更高的复用效率和公平性。