捷联式移动平台重力仪地面测试结果

自主研制移动平台重力仪对我国矿产资源勘探及测绘等领域具有重要意义。研制了一种基于激光捷联惯导的移动平台重力仪,根据移动平台重力测量应用需求及激光捷联惯导系统特点,采用高精度石英挠性加速度计作为重力测量传感器,安装于系统垂向通道,既可作为导航用垂向加速度计,又用于实现标量重力测量。介绍了工程样机系统的组成。利用重力场随高度升高衰减的原理,以相邻楼层间的重力测量差值评价了系统的静态精度;通过地面跑车试验,获得了系统动态测量内符合精度。     

大圆距离及大圆航向的计算

在飞机选型中对各机型进行性能分析、经济性评估或编制飞行计划软件时,常需要根据航段两端点的经纬度坐标计算该航段的大圆距离及航向,在沿大圆航线飞行时也需要知道航路上各点的真航向及磁航向。本文用矢量方法导出了根据起止点的经纬度坐标计算该航段大圆距离及大圆航向的公式以及沿大圆航线飞行时根据给定点的经度计算其纬度和真航向的公式,并且用算例做了验证,结果表明这些公式是正确的。     

一种新型综合性靶场安全系统及其检验测试结果

本文首先简要介绍战略导弹发射场和航天发射场靶场安全系统的作用、特点、主要技术要求,接着介绍按美国空军航天司令部要求,由空军研究所开发的基于GPS弹道测量技术,外测、遥测、遥控综合为一体的机动型靶场安全系统——BMRST的构成及其经多种检验测试的结果。     

仿生光磁导航技术发展研究综述

仿生导航是在仿生技术基础上发展起来的新型导航技术方法,该方法融合了仿生技术的优点,因其抗干扰性强、适应范围广的特点,迎来了研究的热潮。从仿生光流导航、仿生偏振光导航、仿生类脑导航和仿生地磁导航四个角度对近年来大量的相关文献进行了综合性地整理和分析,阐述了其导航原理、发展现状和动态,对其未来的发展前景进行了展望,指出了限制现有技术的难点和瓶颈,对未来仿生导航技术的发展提供了参考,有一定的指导作用。     

基于星体边缘和轨道投影的光学自主导航算法

针对光学导航中存在的通过星体（球体）图像部分边缘点拟合椭圆参数计算轨道参数产生中间误差的问题,提出利用边缘点映射轨道参数的直接投影模型,避免拟合椭圆参数的方法。在小孔成像模型基础上,建立了边缘点与轨道参数的直接投影数学模型,对其映射过程进行了理论推导,利用列文伯格-马夸尔特迭代算法进行求解轨道参数。用实际探测器以及镜头参数进行数值仿真验证,结果表明：该方法在相同边缘点的条件下,轨道精度可以达到5‰。与传统方法相比,这种方法避免了椭圆的拟合过程,减少了引入中间误差过程。     

Ionospheric TEC disturbances over China during the strong geomagnetic storm in September 2017

From September 7 to 8, 2017, a G4-level strong geomagnetic storm occurred, which seriously impacted on the Earth’s ionosphere. In this work, the global ionospheric maps released by Chinese Academy of Sciences are used to investigate the ionospheric responses over China and its adjacent regions during the strong storm. The prominent TEC enhancements, which mainly associated with the neutral wind and eastward prompt penetration electric field, are observed at equatorial ionization anomaly crests during the main phase of the storm on 8 September 2017. Compared with those on 8 September, the TEC enhancements move to lower-latitude regions during the recovery phase on 9 September. A moderate storm occurred well before the start of the strong storm causes similar middle-latitude TEC enhancements on 7 September. However, the weak TEC depletion is observed at middle and low latitude on 9–10 September, which could be associated with the prevailing westward disturbance electric field or storm-time neural composition changes. In addition, the storm-time RMS and STD values of the ionospheric TEC grids over China increase significantly due to the major geomagnetic storm. The maximum of the RMS reaches 12.0 TECU, while the maximum of the STD reaches 8.3 TECU at ~04UT on 8 September.     

Maximal admissible mode decision delay in terminal guidance

Mode decision-maker is a critical component in the logic-based Integrated Estimation and Guidance(IEG) system. For the best possible estimation and guidance performance, the mode decision delay of the mode decision-maker should be limited to a range as small as possible. This paper presents a numerical method for computing the maximal admissible mode decision delay that varies with time-to-go. Particular attention has been paid to highly maneuvering target interception in terminal guidance. The results of this research offer useful guidelines for the design of the mode decision-maker in IEG systems.     

Applications of structural efficiency assessment method on structural-mechanical characteristics integrated design in aero-engines

In the design process of advanced aero-engines, it is necessary to carry out an effective analysis method between structural features and mechanical characteristics for a better structural optimization. Based on the structural composition and functions of aero-engines, the concept and contents of structural efficiency can reflect the relation between structural features and mechanical characteristics. In order to achieve the integrated design of structural and mechanical characteristics, one quantitative analysis method called Structural Efficiency Assessment Method (SEAM) was put forward. The structural efficiency coefficient was obtained by synthesizing the parameters to quantitatively evaluate the aero-engine structure design level. Parameterization method to evaluate structural design quality was realized. After analyzing the structural features of an actual dual-rotor system in typical high bypass ratio turbofan engines, the mechanical characteristics and structural efficiency coefficient were calculated. Structural efficiency coefficient of high-pressure rotor (0.43) is higher than that of low-pressure rotor (0.29), which directly shows the performance of the former is better, there is room for improvement in structural design of the low-pressure rotor. Thus the direction of structural optimization was pointed out. The applications of SEAM shows that the method is operational and effective in the evaluation and improvement of structural design.     

过虚拟交班点的能量最优制导律

针对固定目标的导弹过虚拟交班点制导问题，在希尔伯特空间下，基于最优化理论设计了有无终端落角约束两种情况下的全局能量最优制导律。通过对模型进行线性化，将提出的最优制导模型转化为线性二次型最优控制问题，在此基础上利用零控脱靶量（ZEM）概念对系统模型进行降阶，并推导出解析解。设计的制导律可以使导弹准确经过虚拟交班点，并实现期望终端落角。仿真结果表明，与经典制导律对比，该制导律可以显著减少全局控制能量消耗。     

INTEGRATED GPS/INS OF PSEUDO-RANGE DELTA-RANGE SEMI-PHYSICAL SIMULATION'S RESEARCH

In order to further study the performance of tightly integrated navigation system of GPS/INS, a semi-physical simulation of tightly coupled system has been done based on the data gathered from the experiment of integrated system of GPS and INS. The closed-loop Kalman Filter and U-D discompose algorithm have been used. The simulation results associated to four integrated models of pseudo-range, delta-range, pseudo-range and delta-range alternation, and pseudo-range and delta-range synthesis have been provided, and the actual effects of variously integrated models have been analyzed. The results show that the pseudo-range and delta-range synthesis coupled model is the most effective to improve the coupled system performance and the individual delta-range coupled model had better be avoided in application.