用于新型雷达/红外无源复合诱饵的等离子体参数选择

根据电磁波在分层介质中阻抗匹配原理,计算了非均匀非磁化等离子体平行与垂直极化波的功率反射系数。基于碱金属盐的高温电离特性,以功率反射系数为研究对象,对雷达无源诱饵用等离子体的厚度、温度和电子密度分布等参数选择进行了分析,并根据所选择的参数讨论了入射角对无源诱饵应用的影响。     

噪声源校准方法及不确定度分析

噪声系数测量的一个关键指标就是测量不确定度,测量时所用的噪声源是引起噪声系数测量不确定度的一个明显因素。噪声源的精确校准可以有效地降低噪声系数的测量不确定度,因此它是获得高质量的噪声系数测量的关键因素。介绍了两种对微波和毫米波噪声源超噪比进行校准的方法,分别是Y因子法和增益法,并全面分析了引起校准不确定度的因素。     

导电滑环检测方法研究

制定了导电滑环检测项目：绝缘电阻、接触电阻、接触电阻变化量、载流量、隔离度、电磁噪声、传输能力,并对各检测项目制定了详细的测试方法,为导电滑环的有效检测奠定了很好的基础。     

精密离心机误差对石英加速度计误差标定精度分析

分析了离心机各个误差源,用齐次变换法精确地计算了产生的向心加速度,给出了向心加速度、重力加速度和哥氏加速度在加速度计坐标系下的分量,推导了被试加速度计输入加速度的精确表达式。在给出石英摆式加速度计在精密离心机上标定时的误差模型的基础上,着重讨论了误差模型系数的计算值与离心机误差之间的关系。根据仿真结果找出了某些离心机误差对加速度计误差系数标定的影响关系,为按照加速度计的标定精度来确定离心机的精度打下了理论基础。     

Designing method of acceleration and deceleration control schedule for variable cycle engine

Studies show that different geometries of a Variable Cycle Engine (VCE) can be adjusted during the transient stage of the engine operation to improve the engine performance. However, this improvement increases the complexity of the acceleration and deceleration control schedule. In order to resolve this problem, the Transient-state Reverse Method (TRM) is established in the present study based on the Steady-state Reverse Method (SRM) and the Virtual Power Extraction Method (VPEM). The state factors in the component-based engine performance models are replaced by variable geometry parameters to establish the TRM for a double bypass VCE. Obtained results are compared with the conventional component-based model from different aspects, including the accuracy and the convergence rate. The TRM is then employed to optimize the control schedule of a VCE. Obtained results show that the accuracy and the convergence rate of the proposed method are consistent with that of the conventional model. On the other hand, it is found that the new-model-optimized control schedules reduce the acceleration and deceleration time by 45% and 54%, respectively. Meanwhile, the surge margin of compressors, fuel–air ratio and the turbine inlet temperature maintained are within the acceptable criteria. It is concluded that the proposed TRM is a powerful method to design the acceleration and deceleration control schedule of the VCE.     

复杂终端区进场交通流优化排序方法研究

为提高终端区时空资源利用率,增强空中交通 运行效率,研究了复杂终端区进场交通流优化排序问题。通过深入剖析终端区进场定位点、 航路航线、多跑道系统等资源运行特性,综合考虑尾流间隔、移交间隔、多跑道运行间隔等 各类约束限制,以及最小化航班延误时间、最大化跑道运行容量、最小化终端区飞行时间等 优化目标,建立了复杂终端区进场交通流优化排序模型,并采用带精英策略的非支配排序遗 传算法对所建模型进行求解。选取上海多机场组成的复杂终端区进行实例验证,仿真实验表 明提出的优化方法相比先到先服务方法(First come first serve,FCFS),航班总延误时间 减少20.7%,终端区等待时间减少60.7%,终端区进场交通流运行效率得到显著提升。     

航天器声试验ISO国际标准制定过程及启示

标准国际化是助推中国航天国际化发展战略转型重要途径。针对航天器声试验技术成果,通过积极推动其向国际标准转化,最终使其立项并成为ISO 19924《空间系统——声试验》的国际标准。该标准是在航天器环境试验领域首个由中国发起、起草和主导的国际标准。文章将介绍声试验技术成果向国际标准转化的过程和方法,以分享经验,为我国积极参与国际标准化活动,提高标准国际化水平提供借鉴。     

BP神经网络反演核事故源项中重要参数的研究

核事故发生时,可靠、准确的源项信息能为应急防护行动措施决策提供数据支持。采用Matlab软件神经网络工具箱可以实现基于BP神经网络的核事故源项反演,为提高核事故源项反演计算的准确度,针对反演时的几个重要参数进行研究,包括隐含层节点数、训练函数、学习率和隐含层数。研究结果表明,在单隐含层神经网络结构情况下,存在着最优隐含层节点数,综合考虑训练时间和误差,本文选取隐含层节点数为50来对其他参数影响进行进一步研究;在相同参数设置条件下,训练函数Trainlm比Traingdm更适合数据量较小时的核事故源项反演,反演计算准确度更高,在节点数为50时训练时间缩短了近35%;高学习率以及双隐含层能有效地提高核事故源项反演的精度,但训练时间相对增加。     

基于遥测数据的卫星在轨飞行温度仿真算法研究

研究一种基于遥测数据的卫星在轨飞行温度仿真计算方法,以卫星热控边界温度遥测参数作为仿真计算模型基准温度参数,挖掘星上设备温度与安装边界（热控边界）温度之间的数值定量关系,形成卫星温度关系数值矩阵。通过基准温度遥测数据与卫星温度关系数值矩阵之间数值运算,实现卫星在轨飞行温度仿真预计,计算误差小于2.5℃。     

Aerodynamic design of tractor propeller for high-performance distributed electric propulsion aircraft

Aiming to maximize the aerodynamic performance of the Distributed Electric Propulsion (DEP) aircraft, a hybrid design framework which focuses on the aerodynamic performance of the propeller/wing integration has been developed and validated numerically. Variable-fidelity modelling for propeller aerodynamics has been used to achieve computational efficiency with reasonable accuracy. By optimizing the aerodynamic loading distributions on the tractor propeller disk, the induced slipstream is redistributed into a form that is beneficial for the wing downstream, based on which the propeller blade geometry is generated through a rapid inversed design procedure. As compared with the Minimum Induced Loss (MIL) propeller at a specified thrust level, significant improvements of both the lift-to-drag ratio of the wing and the propeller/wing integrated aerodynamic efficiency is achieved, which shows great promise to deliver aerodynamic benefits for the wing within the propeller slipstream without any additional devices.