用于建立机械制造系统模型的扩展着色Petri网

着色Petri网是描述和分析并行系统的有力工具,近年来在机械制造系统中得到了广泛的应用。由于机械制造系统的自身特点,在表示着色Petri网结构的关联矩阵中含有许多零元素,从而导致着色Petri网占据数据空间大的缺陷,难以对复杂机械制造系统的规划设计与生产调度进行分析研究。 本文基于着色Petri网的基本原理,提出一种适用于建立机械制造系统模型的扩展着色Petri网理论,用于解决着色Petri网占据数据空间大的问题,为Petri网理论在机械制造系统建模方面的广泛应用提供理论基础。最后给出实例,说明减少数据空间的结果。     

飞机机身近区电磁散射建模研究

采用物理光学法和一致性几何绕射理论，分析机身各 球面波照射下的近场电磁散射特性几何绕射并建立其雷达散射截面（ＲＣＳ）数学模型，同时对于复杂机身的前部，采用面元油、即采用双三次Ｂ样条技术对机外形进行拟合，然后再用一致性几何绕射理论进行计算。种方法具有一定的可信度。     

飞船降落伞系统的可靠性建模

飞船降落伞系统中设计有主伞包开关判别和速度判别两个主伞系状态监测装置,这使得飞船降落伞系统具有其自身特点.主伞包开关判别和速度判别装置各自具有两类任务可靠性,且它们各自的监测范围不同.采用冷贮备模型描述飞船降落伞系统可靠性时,需基于一定的假设,不能准确地描述飞船降落伞系统的可靠性.为此,在分析飞船降落伞系统自身特点和冷贮备模型局限性的基础上,采用事件树方法,建立了飞船降落伞系统的可靠性事件树和更为准确的可靠性数学模型.该模型更具一般性,能更准确地反映飞船降落伞系统的可靠性.     

航空发动机低压转子系统的动力学相似设计方法

提出了航空发动机转子系统动力学相似设计方法,以便采用模型替代实际结构对其动力学特性进行研究。基于转子系统的动力学等效原则,通过动力学优化方法建立全尺寸原型的相似等效模型。综合采用方程分析和量纲分析推导转子系统的动力学相似准则,并根据转子设计参数的相似关系建立相似等效模型的缩比模型。基于模型修正方法对三维设计模型的相似误差进行修正,得到预测精度较高的动力学相似模型。以双转子发动机低压转子试验模型的动力学相似设计为例,通过有限元仿真对动力学相似设计方法的有效性进行了验证。结果表明:在设计转速范围内,通过该方法得到的动力学相似模型能够有效预测全尺寸原型的临界转速和不平衡响应,前三阶临界转速的相似误差分别为3.09%、1.75%和0.31%,对应振型的相关性均大于0.93。该方法具有较高的实用价值,可为发动机整机动力学相似设计提供参考。     

Adaptive suppression of passive intermodulation in digital satellite transceivers

For the performance issues of satellite transceivers suffering passive intermodulation interference,a novel and effective digital suppression algorithm is presented in this paper.In con trast to analog approaches,digital passive intermodulation (PIM) suppression approaches can be easily reconfigured and therefore are highly attractive for future satellite communication systems.A simplified model of nonlinear distortion from passive microwave devices is established in consid eration of the memory effect.The multiple high-order PIM products falling into the receiving band can be described as a bilinear predictor function.A suppression algorithm based on a bilinear poly nomial decorrelated adaptive filter is proposed for baseband digital signal processing.In consideration of the time-varying characteristics of passive intermodulation,this algorithm can achieve the rapidness of online interference estimation and low complexity with less consumption of resources.Numerical simulation results show that the algorithm can effectively compensate the passive intermodulation interference,and achieve a high signal-to-interference ratio gain.     

点阵结构部件的增材制造路径连接方法

旨在提高点阵结构部件增材制造的加工效率.点阵结构经分层切片后,每层将产生大量待填充多边形,通过将这些多边形抽象为离散点,并在切片层面内求解旅行商问题,进行连接路径的规划,进而获得高效率的点阵模型填充路径.算法综合考虑到旅行商问题的计算效率以及连接路径的计算总长:采用蚁群算法可获得无交叉连接轨迹,计算2000个点的连接规...     

某型机外形数模修形设计

在某型机外形数模修形设计过程中,探讨如何确定修形原则,即针对存在各种问题的曲面形态,如何确定不同的修形方法,使整个飞机外型数模达到光顺性、结构可实施性、曲面连续性要求。     

基于预测扭矩前馈的涡轴发动机内模控制方法

基于内模原理设计了涡轴发动机功率涡轮转速控制器.针对主旋翼扭矩变化对功率涡轮转速的干扰,提出了一种基于极端学习机的扭矩预测方法.极端学习机训练基于动态仿真数据,其输入通过相关分析获得.基于内模原理的功率涡轮转速控制器采用极点配置的设计方法,将输入信号的内模直接加入控制器,实现鲁棒跟踪.扭矩前馈采用比例微分(PD)控制策略,实现对发动机负载变化干扰的有效补偿.数字仿真结果表明:极端学习机扭矩预测精度高,扭矩相对误差小于1.5‰,与不加前馈控制相比,所提出的控制方法减小了机动飞行过程中功率涡轮转速的超调或下垂30%以上.      

多轮多支柱式飞机起落架运动特性仿真研究

为了评估起降阶段的飞机操控特性,针对某型飞机多轮多支柱式起落架系统,研究组成单个起落架支柱的轮胎、缓冲器、刹车系统、前轮转弯等部件的受力、力矩特性及传递过程。基于线性理论,将多个支柱运动特性叠加,运用Matlab/Simulink软件工具,建立整个系统的仿真模型。嵌入某型飞机六自由度运动解算模型进行飞机落震、加速滑跑、高低速转弯、起飞离地、着陆接地、刹车减速等仿真验证,并在某型飞机动基座模拟器上进行飞行试验。结果表明:该起落架模型各项功能完善,能够正确反映飞机姿态响应过程,飞机起降过程感受与真实飞机基本一致。     

Comparison of GPS derived TEC with the TEC predicted by IRI 2012 model in the southern Equatorial Ionization Anomaly crest within the Eastern Africa region

We have compared the TEC obtained from the IRI-2012 model with the GPS derived TEC data recorded within southern crest of the EIA in the Eastern Africa region using the monthly means of the 5 international quiet days for equinoxes and solstices months for the period of 2012 – 2013. GPS-derived TEC data have been obtained from the Africa array and IGS network of ground based dual-frequency GPS receivers from four stations (Kigali (1.95°S, 30.09°E; Geom. Lat. 11.63°S), Malindi (2.99°S, 40.19°E; Geom. Lat. 12.42°S), Mbarara (0.60°S, 30.74°E; Geom. Lat. 10.22°S) and Nairobi (1.22°S, 36.89°E; Geom. Lat. 10.69°S)) located within the EIA crest in this region. All the three options for topside Ne of IRI-2012 model and ABT-2009 for bottomside thickness have been used to compute the IRI TEC. Also URSI coefficients were considered in this study. These results are compared with the TEC estimated from GPS measurements. Correlation Coefficients between the two sets of data, the Root-Mean Square Errors (RMSE) of the IRI-TEC from the GPS-TEC, and the percentage RMSE of the IRI-TEC from the GPS-TEC have been computed. Our general results show that IRI-2012 model with all three options overestimates the GPS-TEC for all seasons and at all stations, and IRI-2001 overestimates GPS-TEC more compared with other options. IRI-Neq and IRI-01-corr are closely matching in most of the time. The observation also shows that, GPS TEC are underestimated by TEC from IRI model during noon hours, especially during equinoctial months. Further, GPS-TEC values and IRI-TEC values using all the three topside Ne options show very good correlation (above 0.8). On the other hand, the TEC using IRI-Neq and IRI-01- corr had smaller deviations from the GPS-TEC compared to the IRI-2001.