以人为本理念下的现代思想政治教育

研究以人为本的思想政治教育目的。思想政治教育受传统思想的影响之深刻,在价值取向、教育方式、教学过程等方面均有所体现。改变教学方式、确立价值取向、创新教学方法,确立"以人为本"的思想政治教育理念是思想政治教育与时俱进的根本要求,也是有效开展思想政治工作的必然选择。     

以成果为导向的精益管理中评价体系的建立

从实际工作出发,结合Ameco已经取得的成果,提出了建立以成果为导向的精益管理评价体系的目标和意义,阐述了具体的评价指标,并以实例进行了说明。     

基于振动能量积奇异值分解的航空发动机 振动状态识别

为进一步提高航空发动机振动状态监测的有效性和故障诊断的准确性,将机匣截面振动信号的各谐波轴心轨迹椭圆长短轴乘积看成广义时间序列.基于该序列能够全面反映发动机转子系统各谐波能量分布的客观事实,利用其构造矩阵并提取奇异值向量.借助于该向量构造特征值,通过比较特征值向量实现对发动机不同振动状态的识别.对实测振动信号的分析表明:在同一振动状态下,各数据椭圆长短轴乘积相对奇异值强度具有相同的变化趋势和良好的稳定性;在不同振动状态下,椭圆长短轴乘积相对奇异值强度变化趋势不尽相同;通过椭圆长短轴乘积奇异值相对距离熵能够较好地识别发动机各振动状态.     

Estimation and analysis of GPS receiver differential code biases using KGN in Korean Peninsula

The total electron content (TEC) estimation by the Global Positioning System (GPS) can be seriously affected by the differential code biases (DCB), referred to as inter-frequency biases (IFB), of the satellite and receiver so that an accuracy of GPS–TEC value is dependent on the error of DCBs estimation. In this paper, we proposed the singular value decomposition (SVD) method to estimate the DCB of GPS satellites and receivers using the Korean GPS network (KGN) in South Korea. The receiver DCBs of about 49 GPS reference stations in KGN were determined for the accurate estimation of the regional ionospheric TEC. They obtained from the daily solution have large biases ranging from +5 to +27 ns for geomagnetic quiet days. The receiver DCB of SUWN reference station was compared with the estimates of IGS and JPL global ionosphere map (GIM). The results have shown comparatively good agreement at the level within 0.2 ns. After correction of receiver DCBs and knowing the satellite DCBs, the comparison between the behavior of the estimated TEC and that of GIMs was performed for consecutive three days. We showed that there is a good agreement between KASI model and GIMs.     

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

大型伞绳帆和抽打现象连续模型及验证

文章主要推导了可用于描述大型降落伞绳帆和抽打现象的一般绳索三维动力学连续模型,及弦坐标系下可用于求解绳帆现象的两点边值问题(BVP)模型,并采用某型号大型降落伞的空投录像和杆件算例对模型进行验证对比,说明了模型的正确性,采用这一连续模型能够更直观地对大型伞的绳帆和抽打现象进行定性和定量分析。     

一种基于不确定性全寿命周期仿真的分离模块航天器评估方法(英文)

为了对新概念分离模块航天器进行全面评估,本文提出了一种基于不确定性全寿命周期仿真的评估方法。首先,对分离模块航天器术语和体系结构进行了阐述,对评价准则进行了定义,确定以风险调节全寿命周期成本和净收益现值的期望值和方差作为评价指标。其次,对分离模块航天器概念设计阶段学科模型进行了介绍,以此为基础对全寿命周期成本模型和净收益现值模型进行了详细讨论。再次,对全寿命周期不确定性因素进行了分析,并采用概率论进行了数学建模。然后,对全寿命周期仿真过程时序进行了分析,采用面向对象建模的方法对仿真模型进行了建模;仿真模型集成了仿真对象的不确定性模型,能够随着全寿命周期仿真演进对仿真对象的不确定性状态进行动态演化,以此为基础构建了基于不确定性全寿命周期仿真评估平台。最后,基于该评估方法对虚拟对地遥感分离模块航天器方案进行讨论,结果表明在考虑不确定性因素影响下,模块分离方案和分批发射方案对成本与收益有很大影响,且分离模块航天器比其对应传统单颗航天器更有优势。     

低热值气体燃料燃烧室数值模拟与试验研究

以某型航空发动机燃烧室为研究对象,对低热值燃料燃烧室进行了数值模拟和试验研究。采用RNGk-ε模型、小火焰紊流燃烧模型和P-1辐射模型,预估了紊流特性、化学反应速率和辐射通量;应用SIMPLE算法,对离散方程进行求解。计算结果与试验数据比较表明二者基本吻合,这说明计算方法合理,可用来估算低热值燃料燃烧室的燃烧性能。     

管理资本投资对人力资本效益价值增长贡献的研究

文章运用有关经济理论并结合实证，分析了管理资本投资对人力资本效益价值增长的贡献。