无刷直流起动/发电系统的起动控制

介绍了用于某型飞机的无刷直流机载起动/发电系统。该系统的起动/发电机采用电励磁双凸极电机,文中通过改进电机结构降低了起动时的转矩脉动,在理论分析的基础上提出了基于转速变化的阶段性角度控制:低速采用标准位置查询起动,中高速采用随转速变化自动改变提前角的角度控制方式,使起动机工作在最佳状态。最后,完成了18 kW无刷起动/发电系统的样机制作及航空发动机的冷开车试验。试验表明:该系统的起动控制策略正确有效,起动转矩平滑,所需电源容量小,效率高,具有良好的起动性能。     

Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method (FEM). On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data,the reasonability and veracity of calculation are confirmed at the same time.     

Numerical analysis of deflection control of a gas plasma jet based on magnetohydrodynamic staggered electrode configuration

To control the deflection of the gas plasma jet, a new analytical method is proposed based on the Magnetohydrodynamic(MHD) technique. Based on the typical MHD power generation model, the applied voltage is applied to the staggered electrodes, that is, a pair of electrodes on the same side wall are connected to generate an axial current in the channel. Under the action of the magnetic field perpendicular to the direction of the flow, the plasma is subjected to electromagnetic forces perpendicular...     

火星大气进入段抗饱和固定时间阻力加速度跟踪制导律设计

研究了具有固定时间收敛特性的火星探测器大气进入段的标称轨迹跟踪制导问题。首先,针对横向运动,给出与速度成线性关系的航向误差漏斗走廊形式,完成了倾侧角的反号逻辑设计。与横程漏斗走廊反号逻辑相比,该逻辑计算量小,更适用于宇航计算机。与航向误差宽度走廊反号逻辑相比,该逻辑在高速状态下能够避免倾侧角的频繁切换,可提高任务成功的概率。其次,针对纵向运动,通过RBF神经网络补偿了倾侧角饱和问题,利用积分滑模设计了阻力加速度固定时间饱和跟踪制导律,其不仅可有效消除滑模控制的抖振问题,且将跟踪误差以两种不同形式引入制导律,能够加速收敛,能够保证跟踪误差在固定时间内快速收敛至0。最后,通过数值仿真验证了所设计的横向倾侧角切换逻辑和纵向制导律对标称轨迹的快速、精确跟踪能力。     

如何防止空客340/330起飞落地时带坡度

坡度是飞机由于左右机翼升力不一致,绕纵轴滚转而形成的一定角度。现代大型运输机机翼翼展长,发动机离地面较低,如果低高度坡度过大,可能擦翼尖或发动机。另外,着陆时坡度过大还会造成单侧主轮接地而导致垂直过载偏大,影响方向的控制,危及飞行安全。就坡度的成因进行研究,并且给出了几种修正方法,理论与实践相结合,达到安全飞行。     

带背鳍细长平板三角翼脱体涡的实验研究

对后掠角为82.5°具有尖削前缘的细长平板三角翼以及加上背鳍高度分别为hL/s=0.3和hL/s=0.6的机翼组合体在低速风洞进行了大迎角六分力天平测力实验.实验迎角范围为12°~32°,来流速度为25m/s和35m/s.实验结果表明:对单独三角翼,在翼面产生的脱体涡破裂前,其涡流场随着迎角的增大始终是对称且稳定的;增加不同高度的背鳍后,当迎角大到一定程度后,涡流场开始变得不对称和不稳定.背鳍高度不同,流场开始出现不对称时的迎角也不同,在所研究的背鳍高度范围内,背鳍越高,测量得到流场出现不对称时的迎角越小,表明增加低高度的背鳍对细长平板三角翼的背涡流场的稳定有着扰动和破坏作用.实验结果部分证明了文献[1]中的稳定性理论的有效性,同时初步研究了涡失稳后的发展情况.     

斜置尾桨对直升机飞行特性的影响

基于叶素理论建立了斜置尾桨的数学模型,以UH-60A直升机为对象,计算了平飞配平特性,并与试飞结果进行对比,完成了对模型的验证。验证结果表明,所建的斜置尾桨模型合理准确,能满足工程精度。本文从直升机悬停需用功率研究了尾桨斜置角的设计,计算了不同尾桨斜置角对直升机悬停需用功率的影响,得出UH-60A直升机的尾桨斜置角优化值为20~25°。通过计算和对比斜置尾桨与常规尾桨直升机的平飞配平特性,得出尾桨斜置主要影响直升机的纵向配平特性。最后,对斜置尾桨的利与弊进行了一些讨论。     

Effects of yaw-roll coupling ratio on lateral-directional aerodynamic characteristics

Experimental investigation of large amplitude yaw-roll coupled oscillations was conducted in a low-speed wind tunnel using an aircraft configuration model. A special test rig was designed and constructed to provide different coupled motions from low to high angles of attack.A parameter ‘‘coupling ratio" was introduced to indicate the extent of yaw-roll coupling. At each pitch angle, seven coupling ratios were designed to study the yaw-roll coupling effects on the lateraldirectional aerodynamic characteristics systematically. At high angles of attack, the damping characteristics of yawing and rolling moments drastically varied with coupling ratios. In the coupled motions with the rotation taking place about the wind axis, the lateral-directional aerodynamic moments exhibited unsteady characteristics and were different from the ‘‘quasi-steady" results of the rotary balance tests. The calculated results of the traditional aerodynamic derivative method were also compared with the experimental data. At low and very high angles of attack, the aerodynamic derivative method was applicative. However, within a wide range of angles of attack, the calculated results of aerodynamic derivative method were inconsistent with the experimental data, due to the drastic changes of damping characteristics of lateral-directional aerodynamic moments with yaw-roll coupling ratios.     

横流中空心锥形喷雾的扩散特性与影响因素

为了更好地理解和认识空心锥形喷雾射流与横向气流的掺混过程,基于可视化实验测量,针对空心锥形喷雾的初始雾化状态、喷射角度和雾化锥角以及横流速度等因素对空心锥形喷雾射流在横流中的扩散特性进行了系统分析。研究结果表明,随着横流速度的提高,流场中对称反旋涡对（CVP）结构变小,但其稳定性及产生的卷吸气流则是先增强而后减小;提高喷雾初始液滴的动量和数流率,均可以增大射流剪切层的贯穿深度和射流尾迹的伸展高度,同时使流场中CVP的涡量强度增大。基于实验测量结果,建立了空心锥形喷雾垂直入射横流条件下掺混流场液滴群CVP结构特征尺寸和剪切层轨迹的预测关联式。另外针对喷嘴雾化锥角和喷射角度的分析表明,当喷雾初始雾化状态相近时,随着雾化锥角的减小,流场中CVP的水平尺度减小但竖直方向尺度增大且结构更为稳定,同时喷雾液滴的贯穿深度增大;相比喷雾垂直于横流入射,当喷嘴以一定角度逆向横流入射时,CVP结构稳定性减弱,流场剪切层涡结构变大且剪切层区域液滴富集现象减弱,射流尾迹紊乱程度增加,反之,则流场剪切层涡拟序结构变小,射流尾迹现象减弱,CVP结构变小。     

考虑捷联导引头最小视场角约束的制导策略

针对高超声速飞行器捷联导引头,提出导引头最小视场角（FOV）约束问题。首先分析了导引头视线角变化规律,指出在攻击固定目标时,导引头最小视场角约束在弹道末段无法被满足,导引头将丢失目标。在此基础上,基于缩短导引头丢失目标距离的目标,提出一种满足导引头最小视场角约束的制导策略。该策略不依赖于末制导律形式,当最小视场角约束无法被满足时,改变原有制导指令,主动改变弹道轨迹以增加弹体视线角,避免超出视场范围。其次,针对飞行器过载约束,设计了制导策略切换点,在到达切换点时该制导策略将结束工作,避免末端过载过大超出约束。通过对比仿真验证了所提出制导策略有效性,能够大幅度减少导引头丢失目标距离,工程上有利于提高末端命中精度。