GPS/INS 组合导航系统降阶滤波器设计

本文研究了某型号飞机上ＧＰＳ／平台惯性组合导航系统中降阶卡尔曼滤波的设计方法。文中提出了一种降阶滤波器结构，并讨论了模型误差的伪随机噪声补偿方法。采用蒙特——卡洛分析法对降阶滤波器的实际误差进行了数字仿真，结果表明：本文提出的这种降阶滤波器能保证组合系统的导航精度，是一种具有实际使用价值的滤波器     

基于分散化信息滤波的移动机器人定位

给出分散化信息滤波的最优性证明和保证最优性的条件 ,讨论了分散化信息滤波在故障检测和多传感器融合中的优势 ,提出一种在不影响分散化优势的情况下可以减小通讯量的滤波器结构。最后的仿真例子说明该方法在移动机器人定位应用中的有效性。     

利用UKF的航天器自主导航方法研究

UKF(Unscented卡尔曼滤波)是一种新型的直接针对非线性系统的滤波方法。用星敏感器和地平仪测量星光与地平之间的“星光仰角”为观测量的天文自主导航方法,其状态方程和量测方程都是非线性的,使用以往的EKF(推广卡尔曼滤波)进行导航滤波,需将上述两方程分别线性化,故精度较低。本文提出在航天器天文自主导航系统中采用UKF方法,并从仿真计算结果中看到,导航精度有显著提高。     

Sound insulation performance of plates with interconnected distributed piezoelectric patches

This paper deals with the sound insulation performance of a thin plate with intercon-nected distributed piezoelectric patches. Piezoelectric patches are periodically bonded on the sur-faces of the plate in a collocated fashion, and are interconnected via an inductive circuit network. This piezoelectric system is termed as piezo-electromechanical (PEM) plate in the paper. Homogenization methods are involved under a sub-wavelength assumption to analytically develop the dynamical equations for the PEM plate. The dispersion relationships and energy densities of the wave modes propagating in the PEM plate are studied;the sub-wavelength assumption is verified for the simulations in this paper. The coincidence frequency of the PEM plate is researched, and results show that the coincidence frequency of the PEM plate will disappear at certain circum-stances;mathematical and physical explanations are made for this phenomenon. The disappearance of the coincidence frequency is used to optimize the value of inductance, for the purpose of improv-ing the sound transmission loss of the PEM plate.     

Investigation of dynamics of discrete framed structures by a numerical wave-based method and an analytical homogenization approach

In this article, the analytical homogenization method of periodic discrete media (HPDM) and the numerical condensed wave finite element method (CWFEM) are employed to study the lon-gitudinal and transverse vibrations of framed structures. The valid frequency range of the HPDM is re-evaluated using the wave propagation feature identified by the CWFEM. The relative error of the wavenumber by the HPDM compared to that by the CWFEM is illustrated in functions of fre-quency and scale ratio. A parametric study on the thickness of the structure is carried out where the dispersion relation and the relative error are given for three different thicknesses. The dynamics of a finite structure such as natural frequency and forced response are also investigated using the HPDM and the CWFEM.     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

多功能信号发生器的设计与制作

仪器由AT89C55单片机进行控制,通过键盘、LCD显示模块进行人机对话,完成波形选择、频段选择,频率、幅度输出控制。由MAX038产生正弦波、方波、三角波,其波形选择由单片机进行控制;频段选择由五档组成,可通过旋扭开关完成;频率由单片机输出数据经D/A转换后控制MAX038;幅度由单片机输出数据经D/A转换后改变放大器负反馈深度来实现输出信号幅度的变化。     

单天基平台测向的空间非合作目标跟踪

针对仅含角度测量信息的单个天基平台可观测性较弱的问题,提出了一种含脉冲机动检测的空间非合作目标跟踪算法,并设计了非合作目标实时跟踪数据处理流程.该算法利用抗差估计技术和UKF（Unscented Kalman Filter,无迹卡尔曼滤波）算法构造目标跟踪滤波器,并综合残差多项式拟合和新息分布特征等方法实现目标机动检测,在天基平台观测信息类型有限和观测几何较差的情况下,可以同时排除孤立野值和成片测量野值的影响,实现非合作机动目标的连续稳定跟踪.数值实验验证了算法的可行性和有效性,也表明了跟踪精度和可靠性与测量精度密切相关.     

免维护铅酸蓄电池滤气片制造工艺研究

免维护铅酸蓄电池用滤气片的组成，烧结工艺及疏水处理工艺对孔隙率、透气率、疏水性及耐酸性有很大影响。以Ａｌ２Ｏ３和ＳｉＯ２为主要成份的滤气片在１１００～１６００℃烧结后，经聚四氟乙烯疏水处理后用于免维护电池，能有效地阻止水份的损耗。