某型航改燃气轮机空气系统设计及试验验证

介绍了某型航改燃气轮机空气系统的设计方法和准则,通过典型流动单元建立了1维空气系统设计网络,采取1元等熵不可压流方法完成了燃气轮机空气系统设计与计算分析;通过空气系统整机试验,获得了关键部位的压力温度分布,根据试验验证完成了该系统设计方案。     

AA2024铝合金搅拌摩擦焊接头特性研究

对6 mm厚AA2024-T4铝合金搅拌摩擦焊接头特性进行了研究。通过拉伸试验,得到了应力-应变曲线。用光学显微镜、显微硬度仪以及扫描电镜对焊接接头进行了金相分析、硬度测试以及断口分析。结果表明：试件断裂属于韧性断裂;断裂发生在前进侧热机影响区/热影响区的过渡区;当搅拌头转速为800 r/min,焊接速度为100 mm...     

完全等电位屏蔽高值电阻器

利用实验数据描述了湿度对高值电阻的影响程度,介绍了降低湿度对高值电阻影响程度的常用方法。提出了一种具有完全等电位屏蔽作用的高值电阻器,它能有效降低湿度影响和电磁干扰影响。介绍了完全等电位屏蔽高值电阻器的结构,理论阐述了克服湿度影响和电磁干扰影响机理。     

Semi-analytic Solution of Steady Temperature Fields During Thin Plate Welding

Usually, it is very difficult to find out an analytical solution to thermal conduction problems during high temperature welding. Therefore, as an important numerical approach, the method of lines (MOLs) is introduced to solve the temperature field characterized by high gradients. The basic idea of the method is to semi-discretize the governing equation of the problem into a system of ordinary dif-ferential equations (ODEs) defined on discrete lines by means of the finite difference method, by which the thermal boundary condition with high gradients are directly embodied in formulation. Thus the temperature field can be obtained by solving the ODEs. As a numeri-cal example, the variation of an axisymmetrical temperature field along the plate thickness can be obtained.     

A-TIG焊接技术在奥氏体不锈钢焊接中的应用研究

简要介绍了A-TIG焊接的工艺特点和国内外发展概况。研究了A-TIG焊接技术中活化剂对0Cr18Ni9奥氏体不锈钢焊缝熔深的影响。分别考察对比了不锈钢A-TIG焊及普通TIG焊焊接后所得两种焊缝的机械性能、化学成分、金相组织、铁素体含量及焊缝抗晶间腐蚀性能。结果表明：A-TIG焊接具有与TIG焊间等优良的焊缝质量，并可大幅度地增加焊缝的熔透量，提高焊接效率。     

液相过渡扩散焊

重点介绍液相过渡扩散焊的特点及国外近年的研究和应用情况。     

Rayleigh问题的Monte Carlo直接模拟

利用流场直接模拟的Ｍｏｎｔｅ Ｃａｒｌｏ方法数值模拟了Ｒａｙｌｅｉｇｈ问题的流场，获得了相应的结果，结果与解析解及经验解吻合较好，ＤＳＭＣ方法避免了求解复杂的控制方程，在流动比较复杂的情形下，有很大的优越性，是研究稀薄气体流动的一种好方法。     

近代烃类转化用换热转化器的开发与应用

汇集国内外开发的新型换热转化器(亦称转化炉)的设计形式和结构特征,可供老厂节气节能挖潜技术改造或新建装置优选和参考。     

The entropy in groups – a clue to galaxy formation

The entropy in the hot X-ray gas in groups of galaxies is a fossil of the process of galaxy formation The amount of entropy in these low mass systems considerably exceeds that predicted from structure formation models. To explain these results requires “extra” energy which is a relic of the process of star formation and active galaxy heating. We present new XMM results on the entropy and entropy profiles. These results are inconsistent with pre-heating scenarios which have been developed to explain the entropy floor in groups but are broadly consistent with models of structure formation which include the effects of heating and/or the cooling of the gas. The total entropy in these systems provides a strong constraint on all models of galaxy and group formation, and on the poorly defined feedback process which controls the transformation of gas into stars and thus the formation of structure in the universe.     

拔丝机轮毂热喷焊工艺研究

本文就拔丝机轮毂件的热喷焊工艺过程及相关工艺参数进行了研究，这项工艺已成功应用于该轮毂件的生产中。