液氧煤油补燃发动机泵间管路高温富氧燃气掺混冷凝特性数值研究

针对液氧煤油补燃发动机液氧预压泵和主泵间管路富氧燃气掺混冷凝现象,建立了大过热度下富氧燃气和液氧两相流动掺混冷凝特性的全三维数值仿真方法,并以常温制冷剂R123为工质,通过气液掺混冷凝实验验证了数值仿真模型对管内两相流型和气液再液化性能的精确预测能力.仿真结果表明:弯管段气液两相在离心力作用下发生横向相对流动,强化了相...     

Improving EGT sensing data anomaly detection of aircraft auxiliary power unit

The reliability of the on-wing aircraft Auxiliary Power Unit (APU) decides the cost and the comfort of flight to a large degree. The most important function of APU is to help start main engines by providing compressed air. Especially on the condition of sudden shutdown in the air, APU can offer additional thrust for landing. Therefore, its condition monitoring has drawn much attention from the academic and industrial field. Among the on-wing sensing data which can reflect its condition, Exhaust Gas Temperature (EGT) is one of the most important parameters. To ensure the reliability of EGT, one kind of data-driven anomaly detection framework for EGT sensing data is proposed based on the Gaussian Process Regression and Kernel Principal Component Analysis. The situations of one-dimensional and two-dimensional input data for EGT anomaly detection are considered, respectively. The cross-validation experiments are carried out by utilizing the real condition data of APU, which are provided by China Southern Airlines Company Limited Shenyang Maintenance Base. The anomalous stuck condition of EGT sensing data is also detected. Experimental results show that the proposed EGT sensing data anomaly detection method can achieve better performance of false positive ratio, false negative ratio and accuracy.     

Experimental and numerical study on pressure oscillation in a combustor with rotary valve

A rotary valve coupled in a combustor assembly can generate periodic pressure oscillations inside the combustor and can be used to study the combustion instability in the combustion chamber of a rocket engine. This paper proposes a cold gas flow experimental system based on a rotary valve and a corresponding rotation model. A 3D numerical model is proposed to obtain the transient flow inside the rotary valve, and the dynamic mesh technique and User-Defined Functions (UDFs) are adopted to implement a swing motion instead of a rotary motion. Several cold gas flow experiments are carried out at rotating speeds of 75 225, and 375 rpm to verify the validity of the numerical model. The effects of rotating speed, stroke length ratio and radius of the RED (Rotor Exhaust Duct) on the pressure oscillations are studied using this numerical model. The results show that the maximum and peak-to-peak values of the pressure oscillations gradually decrease with increasing rotating speed. The ratio of the corresponding peak-to-peak value to the maximum pressure (pressure amplitude ratio) is reduced from 1.81 to 0.6%. The stroke length ratio affects the pressure waveform because it leads to a change in the time spent in the non-exhaust stage. When the stroke length ratio is 0, the waveform closely resembles a sine wave. With the increase in the stroke length ratio, the pressure waveform exhibits a more square or a triangular wave shape. Finally, a high-frequency and high-amplitude pressure oscillation can be obtained by appropriately increasing the radius of the RED.     

中心进气复杂旋转盘压力特性的实验研究

中心进气具有两个出口的旋转盘系统中静盘表面沿半径方向的静压分布由实验方法获得.针对转速、冷却气体流量以及叶片冷却孔的存在与否对腔内流动特性的影响进行了分析.结果表明:在本实验范围内,静盘表面静压沿半径方向先减小,后增大.静盘表面静压随着总流量的增加而增加,随转速增加而降低.当减少盘面出流孔的数量时,静盘表面静压将会增加.当冷却气体流量较大时,盘腔内不能形成明显的旋转核心.     

飞机轮胎自动充气与检测装置的研制

为了减轻飞机轮胎的充气与检测工作量，提高工作效率，增加操作时的安全性．研制了一种飞机轮胎自动充气与检测装置。试验结果表明，该装置性能可靠、工作安全、使用范围宽、使用效率高，具有国内领先水平。     

{MC COMMENT: PA CORRECTION}Theoretical study of ullage washing with mixed inert gas in a non-equilibrium state

The Mixed Inert Gas (MIG) produced by the novel Green OnBoard Inerting Gas Generation System (GOBIGGS) mainly consists of carbon dioxide, nitrogen and oxygen. Because of the large solubility of carbon dioxide in jet fuel compared with nitrogen, the no gas release or equilibrium model could not be employed any more. In this paper, first, a mathematical model of the ullage washing was set up to predict the variation of the oxygen concentration on ullage and in the fuel, and the gas evolution and dissolution rate were calculated by Fick’s second law. Then, an experimental apparatus was constructed to verify the accuracy of the model. Finally, the numerical comparisons of ullage washing using Nitrogen Enriched Air (NEA) and MIG are presented under various flow rates and fuel loads, and the result reveals that the variation of the oxygen concentration on ullage is nearly identical whatever the inert gas is NEA or MIG. However, the variation of the oxygen concentration in the fuel is disparate, and the oxygen concentration decreases rapidly if the inert gas is MIG, especially when the fuel load is low or the flow rate of the inert gas is high. Besides, MIG could suppress the rising trend of the oxygen concentration on ullage when the aircraft ascends if the fuel tank is fully washed into an equilibrium state on ground.     

高压气体压力现场校准方法研究

针对高压气体压力仪表现场校准的具体要求，提出高压气体压力现场校准方法。介绍了目前国内外高压气体压力现场校准领域内的研究现状及校准用标准器的技术要求，现场应具备的环境条件，校准项目，校准点的选取。本校准方法在被校准压力仪表的使用范围内校准，不需要拆卸压力仪表，大大便利了现场高压气体压力仪表的校准，对高压气体压力仪表现场校准测量不确定度进行评定及验证。     

大型飞机气源起动装备供气流程设计与计算

为了研发具有自主知识产权的气源起动装备,立足于大型飞机较高压力、超大流量的特殊气源起动保障需求,设计了以双级无油螺杆压缩为核心技术的供气流程,对其中涉及的级间压力、散热量、除水量等关键参数进行了分析与计算,为解决超大流量气源的二次升压、风冷散热、高温除水等核心技术难题奠定了基础。     

民用发动机状态混沌预测算法

首先应用Haar小波和DB16小波对航空发动机排气温度的原始数据序列进行去噪处理,并且证明了处理后的数据序列具有混沌特征.其次应用混沌理论建立发动机状态预测算法,实现对排气温度的预测.通过检验排气温度预测值是否超过所规定的红线,以及该曲线是否平稳,从而进行发动机的健康状态排查.作为验证实例,使用一组某机型发动机实际飞行...     

水下超声速燃气射流气泡的生长及压力波传播特性实验研究

为获取燃气射流对上游水域的影响特性,采用燃气发生器和水下实验系统,研究了水下超声速燃气射流的气泡生长及演变过程,以及气泡压力波在水中的传播特性,并研究了压力波在水介质中的衰减规律。研究表明,燃气泡生长和"破碎"伴生着压力脉动在水介质中传播,气泡压力波的能量在水介质中快速衰减。