Multi-h CPM遥测信号的定时频率联合估计技术

针对Multi-h CPM（Multi-h Continue Phase Modulation,多指数连续相位调制）遥测接收机的符号定时和载波频率同步问题,在分析MLSD（Maximum-likelihood Sequence Detection,最大似然序列检测）度量值是符号定时偏差和频率偏差的凸函数的基础上,提出一种基于迟/早门和升/降频门的符号定时和频率同步联合估计算法,通过似然值比较,对符号定时偏差和频率偏差进行迭代估计;并对该算法进行仿真,得到不同参数下的同步性能,给出同步参数选择建议.仿真结果表明：将该算法应用到Multi-h CPM遥测系统中,可实现低信噪比信号的快捕和高精度同步.     

面向建筑空间的OFDM信号定位性能分析

针对利用OFDM信号进行定位时信号非连续性问题,提出一种粗检测和精细检测结合的测距方法,将距离测量转换为不同尺度的时延样点,采用时域粗检测快速估算接收OFDM信号的最大相关峰值,然后对传输时延进行频域精细测量,提升了小数倍采样周期时延测量的精度。在此基础上,分析了OFDM信号的定位性能,仿真结果表明,当OFDM信号在信噪比-11dB的情况下测距误差由3m左右(子载波数512)降至1m(子载波数4096)。     

基于蓝牙4.0的接近度分类室内定位算法

蓝牙4.0技术已经广泛应用于手机、平板电脑等移动终端设备,使得利用其实现室内定位具有极其广阔的应用前景。通过对蓝牙4.0技术的研究,根据蓝牙4.0 RSSI损耗特征进行接近度分类,提出一种限定区域k-近邻改进算法。实验结果表明,运用优化后的RSSI指纹定位算法室内定位平均误差可达到dm级,可充分满足商用室内LBS“m级”的定位精度和“s级”响应的需求。     

蓄电池巡回检测装置的可靠性改进研究

针对蓄电池巡回检测装置在可靠性试验中出现的故障,从三个方面提出了可靠性改进措施。通过采用看门狗和软件抗干扰技术提高巡回检测装置的可靠性,并对提高巡回检测装置可靠性的其他方法进行了探讨。     

多航天器协同探测星簇构型探测效能的评价方法

为定量评估不同星簇构型设计的探测效能以进行各航天器的轨道设计,基于空间四面体构型的体张量定义,分析现有空间四面体构型的评价参量,并采用将空间五航天器构型分解为“五个四面体”和“主四面体加第五点问题”这两种方法定量评价空间五点协同探测星簇构型的探测效能。最后利用项目组已有的五个航天器在一个轨道周期内的模拟轨道数据对所提出的方法进行仿真,结果表明所提出的方法可以较好地评价空间五点构型的探测效能。     

一种用于接收微波的基带数字AGC设计

文章首先提出了一种基于微波信号下变频的基带数字AGC实现方案,然后给出了AGC检波电路、滤波电路、比较器电路设计。     

Demonstration of a high sensitivity GNSS software receiver for indoor positioning

Advances in signal processing techniques contributed to the significant improvements of GNSS receiver performance in dense multipath environments and created the opportunities for a new category of high-sensitivity GNSS (HS-GNSS) receivers that can provide GNSS location services in indoor environments. The difficulties in improving the availability, reliability, and accuracy of these indoor capable GNSS receivers exceed those of the receivers designed for the most hostile urban canyon environments. The authors of this paper identified the vector tracking schemes, signal propagation statistics, and parallel processing techniques that are critical to a robust HS-GNSS receiver for indoor environments and successfully incorporated them into a fully functional high-sensitivity software receiver. A flexible vector-based receiver architecture is introduced to combine these key indoor signal processing technologies into GSNRx-hs™ – the high sensitivity software navigation receiver developed at the University of Calgary. The resulting receiver can perform multi-mode vector tracking in indoor environment at various levels of location and timing uncertainties. In addition to the obvious improvements in time-to-first-fix (TTFF) and signal sensitivity, the field test results in indoor environments surrounded by wood, glass, and concrete showed that the new techniques effectively improved the performance of indoor GNSS positioning. With fine GNSS timing, the proposed receiver can consistently deliver indoor navigation solution with the horizontal accuracy of 2–15 m depending on the satellite geometry and the indoor environments. If only the coarse GNSS timing is available, the horizontal accuracy of the indoor navigation solution from the proposed receiver is around 30 m depending on the coarse timing accuracy, the satellite geometry, and the indoor environments. From the preliminary field test results, it has been observed that the signal processing sensitivity is the dominant factor on the availability of the indoor navigation solution, while the GNSS timing accuracy is the dominant factor on the accuracy of the indoor navigation solution.     

UWB与GNSS结合的室内外一体化定位系统设计

针对电力北斗安全应用、自动驾驶导航等应用场景对室内外一体化无缝定位的迫切需求,设计了一种将UWB与GNSS结合的一体化无缝定位系统.通过将UWB标签与小型化GNSS模块集成到手持智能设备上形成一体化定位终端,服务器软件对卫导结果与超宽带定位结果进行融合,输出连续定位结果.实验结果表明,该系统可以实现人员的室内外一体化无...     

WCO－32型第二代红外线轴温探测系统热轴判别标准的计算机算法

本文分析了用ＷＣＯ－３２型第二代红外线轴温探测设备判别热轴的计算机程序，得出其热轴判别的计算机流程图；根据对大量列车数据的统计和分析，得出各种车辆轴承轴温的分布图；运用概率论和数理统计方法，确定了第二代红外线热轴判别标准的几个主要参数的计算机算法。     

超视距雷达中的目标检测问题

工作在高频波段(3—30MHz)的超视距雷达能够探测和跟踪视距以外飞机、舰船等目标，它在民用和军事上均有重要的应用价值。但超视距雷达的目标信号会埋没在强海杂波中，使得目标信号的检测极为困难。本文先讨论了一阶和二阶Bragg海杂波特性，然后针对强海杂波中目标检测的特点，讨论了距离一频率维的目标恒虚警检测方案，并提出了一些有意义的建议。