带落角约束的圆弧比例导引律和偏置比例导引律的研究

为了实现导弹以一定落角命中目标,研究了两种带有落角约束的圆弧比例导引律和偏置比例导引律。首先建立弹目相对运动数学模型和框架动力学数学模型,然后阐述了两种导引律的基本原理,接着对导弹在三维空间内攻击静止与运动目标进行数学仿真试验,仿真实验证明两种导引律都能以较小的脱靶量和期望落角命中目标,最后从原理上和仿真实验上对两种导引律进行了对比研究。     

腐蚀环境下铜薄膜传感器金属结构裂纹监测

铜薄膜传感器在飞机金属结构损伤监测过程中,将长期面临大气腐蚀环境的影响。针对此背景,研究了铜薄膜传感器在腐蚀环境下的耐蚀性能,及腐蚀后的疲劳裂纹监测性能。首先,采用脉冲偏压多弧离子镀技术在不同弧电流和基体负偏压水平下制备了一系列铜薄膜,对其耐蚀性能进行了对比研究。结果表明,在弧电流60 A和基体负偏压250 V时沉积的铜薄膜耐蚀性能最佳。然后,结合耐蚀性能最佳的沉积工艺参数,在2A12-T4铝合金中心孔板试件上制备了同心环状铜薄膜传感器阵列,并开展了盐雾腐蚀试验。最后,对腐蚀试验后的铜薄膜传感器进行了疲劳裂纹监测试验。结果表明:铜薄膜传感器在腐蚀环境下具有良好的耐蚀性能,耐蚀时间达1 000 h;腐蚀试验后的铜薄膜传感器对裂纹变化敏感,能实现对裂纹定量监测,监测精度为1 mm,监测结果具有良好的可重复性。     

00Cr17Ni14Mo2不锈钢的性能研究

本文研究了00C r17N i14Mo2不锈钢材料的的性能,证明其具有很好的机械性能、焊接性能和耐腐蚀性能,从用户和研究开发的角度探讨了其在压力容器、化工装置等领域的应用。     

基于点阵和TPMS结构的电子器件散热器性能数值模拟研究

随着电子器件集成度显著提高,散热问题愈加突出,为保证电子器件正常工作,对散热器的性能要求愈发严苛,目前强制风冷是最普遍的散热方式,针对传统风冷散热器的翅片结构具有换热面积小、对流换热系数低等缺陷,提出 SC-BCC 点阵和三周期极小曲面(TPMS,W型)2种翅片结构风冷散热器,并对其传热性能开展了数值模拟研究。采用体积平均尺度(REV)数值仿真模型,对大尺寸风冷散热器进行传热性能研究具有较高可靠性,可大幅节省计算资源与成本。数值计算结果显示:在相同孔隙率和人口速度条件下,SC-BCC结构的乐降比 TPMS 结构高27.2%,热流量比TPMS 结构高6.7%。该结果表明在对传热性能需求较高而可接受压降范围较大的情况下可选择点阵结构,相反可选择 TPMS 结构。     

Composite impact vector control based on Apollo descent guidance

A new three-dimensional missile guidance law to control the impact vector against a stationary target is proposed. The composite guidance law has two well-known components: Apollo descent guidance and trajectory shaping guidance. These respectively linear and planar guidance laws are combined to achieve a specified impact direction. The main idea is to define an impact plane and to steer the missile onto this plane using Apollo descent guidance while concurrently performing trajectory shaping wi...     

空间对接机构碰撞试验系统的开发研究

为研究空间对接机构在对接过程中的碰撞现象,研制了碰撞试验系统.探讨了试验系统方案;依据Hertz弹性接触理论,仿真计算了加速度频率特性,确定了加速度传感器的选择原则;利用该系统开展了低速碰撞试验.试验结果表明,该系统能够满足测量对接碰撞力的要求.     

热阻式热流传感器校准装置研究

介绍了热流传感器的主要应用场合,说明了建立热阻式热流传感器校准装置的重要意义,论述了热阻式热流传感器的测量原理及其校准方法,对保护热板法的国内外研究现状进行了总结。设计了保护热板法校准装置,实现热阻式热流传感器量值的准确溯源。     

New findings and appraisal of structural control on polygonal impact crater rim-geometry,a study from Mare Fecunditatis,Moon

Polygonal Impact Craters (PICs), having a distinct polygonal rim geometry, are common on terrestrial planets, their natural satellites such as Earth’s Moon and the asteroids. The straight segments of PIC-rims are arguably subparallel or oblique to existing fracture/fault planes in their vicinity, and such pre-existing structural weak planes are considered responsible for the shape of the PICs. The Mare Fecunditatis, a lunar maria, preserves mappable PICs as well as different geomorphic features like wrinkle ridges, grabens and pit crater chains which owe their origin to either compressional or extensional faulting. To understand the structural control, if any, on the PIC-rim geometry in Mare Fecunditatis, PICs, both simple and complex, and the deformational features are mapped, superposition relations between them are observed and trends are compared. The comparison between frequency of rim segment trends of the two types of PICs with wrinkle ridges, grabens and pit crater chains, and also statistical correlation between them, interestingly indicate that the wrinkle ridges and grabens are found to have negligible or no influence on the rim geometry of the PICs. Wrinkle ridges, known to be a group of the Mare Fecunditatis' oldest deformation features, are older than most of the preserved craters and are likely to have had control over the PIC shape. However, lack of correlation between the trends of wrinkle ridges and PIC rims indicates that most of the craters were formed after the fractures beneath the old wrinkle ridges ceased to act as mechanical discontinuity planes due to possible induration caused by fracture-filling through concomitant and later magma injection. The PICs dispersed throughout the maria could have avoided the influence of the grabens, the majority of which are located near the margin of the maria. Pit crater chains with possible deep roots and still/recently continued dike activities, were the only available weak planes which could influence the PIC rim shapes.     

落角与视场约束制导控制一体化策略

针对考虑视场(FOV)约束和落角约束的高超声速飞行器高精度打击问题，提出一种基于自适应动态规划(ADP)的新型制导控制一体化(IGC)策略。首先设计一种融合视场角与落角约束的视场角指令，在视场角精确跟踪的同时实现精确命中并满足两种约束，从而将约束问题转化为跟踪问题；然后，借助干扰观测技术估计制导控制一体化模型中不确定性并引入到性能指标设计中，又同时将视场角约束与落角约束考虑进去，设计基于自适应动态规划的制导控制一体化方法。利用ADP的强化学习思想求解出最优控制策略，既保证高超声速飞行器的精准打击，又满足视场角约束与落角约束，而且兼顾了对不确定性的鲁棒性。仿真结果验证了本文所提方法的有效性与优势。