磁-光/涡流成像技术的有限元分析

近年来迅速发展的磁－光成像（ＭＯＩ）技术使涡流检测技术得到了新的进展。本文运用磁－光／涡流成像的有限元模型对典型的飞机构件缺陷（如连接飞机表面两个铝层的紧固件下面的裂纹）进行模拟。模拟结果表明,其磁场垂直分量的变化对这种结构来说是相当灵敏的,采用ＭＯＩ技术可以用来探测隐藏在紧固件帽下面的缺陷。     

航天光学采样成像系统MTF的优化设计与MTFC

简要介绍了成像链、成像系统和遥感系统的概念;对像质和像质差异的表征和度量、成像系统性能的表征等予以说明;重点探讨航天光学采样成像系统MTF的优化设计与MTFC问题,并给出讨论结果。     

Cassini Imaging Science: Instrument Characteristics And Anticipated Scientific Investigations At Saturn

The Cassini Imaging Science Subsystem (ISS) is the highest-resolution two-dimensional imaging device on the Cassini Orbiter and has been designed for investigations of the bodies and phenomena found within the Saturnian planetary system. It consists of two framing cameras: a narrow angle, reflecting telescope with a 2-m focal length and a square field of view (FOV) 0.35^∘ across, and a wide-angle refractor with a 0.2-m focal length and a FOV 3.5^∘ across. At the heart of each camera is a charged coupled device (CCD) detector consisting of a 1024 square array of pixels, each 12 μ on a side. The data system allows many options for data collection, including choices for on-chip summing, rapid imaging and data compression. Each camera is outfitted with a large number of spectral filters which, taken together, span the electromagnetic spectrum from 200 to 1100 nm. These were chosen to address a multitude of Saturn-system scientific objectives: sounding the three-dimensional cloud structure and meteorology of the Saturn and Titan atmospheres, capturing lightning on both bodies, imaging the surfaces of Saturn’s many icy satellites, determining the structure of its enormous ring system, searching for previously undiscovered Saturnian moons (within and exterior to the rings), peering through the hazy Titan atmosphere to its yet-unexplored surface, and in general searching for temporal variability throughout the system on a variety of time scales. The ISS is also the optical navigation instrument for the Cassini mission. We describe here the capabilities and characteristics of the Cassini ISS, determined from both ground calibration data and in-flight data taken during cruise, and the Saturn-system investigations that will be conducted with it. At the time of writing, Cassini is approaching Saturn and the images returned to Earth thus far are both breathtaking and promising.This revised version was published online in July 2005 with a corrected cover date.     

多角度多光谱遥感技术

文中以EOS平台上配置的多角度成像光谱辐射计(MISR)为例,对多角度多光谱遥感技术的科学目标以及仪器基本概念、组成、关键技术和数据应用进行了讨论。     

绝对值检波狄克辐射计的指标测量与成像实验

对所研制的 8mm非平衡绝对值检波狄克辐射计的主要技术参数进行了实验测量 ,并利用改进后的成像系统进行了目标辐射特性成像实验。结果表明 ,该辐射计工作状况稳定可靠 ,成像系统的图像质量得到了明显的改善     

基于有效准则矢量生成的成像调度方法

进行高效成像调度是卫星控制的一项重要任务。通过将成像需求序列对应为有向图中的成像路径,结合成像调度问题特点,基于多个优化准则使用支配关系对成像路径质量进行综合评价,提出有效准则矢量生成算法。利用成像有向图的拓扑特性,基于时间顺序顶点选择策略进行顶点标记更新,生成出有向图中所有的有效准则矢量及每个准则矢量对应的一条Pareto优化路径。实验结果表明,获得的有效准则矢量数目小,算法可以在较短时间内得到多条具有代表性的优化成像路径,满足卫星成像调度的时间和性能要求。     

高分辨率星载合成孔径雷达成像处理方法

提出了一种适用于大距离徒动高分辨率星载合成孔径雷达 (SAR)精确成像的改进Chirp Scaling(CS)成像处理算法 ,以及实现单视图象斑点噪声抑制的基于目标检测的增强无偏最大后验概率 (TDRGMAP)方法。采用这种高精度成像处理方法和单视图像斑点噪声抑制方法 ,可以实现星载 SAR高空间分辨率和高辐射分辨率的雷达图像。     

Validation of non-linear split window algorithm for land surface temperature estimation using Sentinel-3 satellite imagery: Case study; Tehran Province,Iran

In recent years, land surface temperature (LST) has become critical in environmental studies and earth science. Remote sensing technology enables spatiotemporal monitoring of this parameter on large scales. This parameter can be estimated by satellite images with at least one thermal band. Sentinel-3 SLSTR data provide LST products with a spatial resolution of 1 km. In this research, direct and indirect validation procedures were employed to evaluate the Sentinel-3 SLSTR LST products over the study area in different seasons from 2018 to 2019. The validation method was based on the absolute (direct) evaluation of this product with field data and comparison (indirect) evaluation with the MODIS LST product and the estimated LST using the non-linear split-window (NSW) algorithm. Also, two emissivity estimation methods, (1) NDVI thresholding method (NDVI-THM) and (2) classification-based emissivity method (CBEM), were used to estimate the LST using the NSW method according to the two thermal bands of Sentinel-3 images. Then, the accuracy of these methods in estimating LST was evaluated using field data and temporal changes of vegetation, which the NDVI-THM method generated better results. For indirect evaluation between the Sentinel-3 LST product, MODIS LST product, and LST estimated using NSW, four filters based on spatial and temporal separates between pairs of pixels and pixel quality were used to ensure the accuracy and consistency of the compared pairs of a pixel. In general, the accuracy results of the LST products of MODIS and Sentinel-3, and LST estimated using NSW showed a similar trend for LST changes during the seasons. With respect to the two absolute and comparative validations for the Sentinel-3 LST products, summer with the highest values of bias (?1.24 K), standard deviation (StDv = 2.66 K), and RMSE (2.43 K), and winter with the lowest ones (bias of 0.14 K, StDv of 1.13 K, and RMSE of 1.12 K) provided the worst and best results for the seasons in the period of 2018–2019, respectively. According to both absolute and comparative evaluation results, the Sentinel-3 SLSTR LST products provided reliable results for all seasons on a large temporal and spatial scale over our studied area.     

Applications of tuned mass dampers to improve performance of large space mirrors

In order for future imaging spacecraft to meet higher resolution imaging capability, it will be necessary to build large space telescopes with primary mirror diameters that range from 10 m to 20 m and do so with nanometer surface accuracy. Due to launch vehicle mass and volume constraints, these mirrors have to be deployable and lightweight, such as segmented mirrors using active optics to correct mirror surfaces with closed loop control. As a part of this work, system identification tests revealed that dynamic disturbances inherent in a laboratory environment are significant enough to degrade the optical performance of the telescope. Research was performed at the Naval Postgraduate School to identify the vibration modes most affecting the optical performance and evaluate different techniques to increase damping of those modes. Based on this work, tuned mass dampers (TMDs) were selected because of their simplicity in implementation and effectiveness in targeting specific modes. The selected damping mechanism was an eddy current damper where the damping and frequency of the damper could be easily changed. System identification of segments was performed to derive TMD specifications. Several configurations of the damper were evaluated, including the number and placement of TMDs, damping constant, and targeted structural modes. The final configuration consisted of two dampers located at the edge of each segment and resulted in 80% reduction in vibrations. The WFE for the system without dampers was 1.5 waves, with one TMD the WFE was 0.9 waves, and with two TMDs the WFE was 0.25 waves. This paper provides details of some of the work done in this area and includes theoretical predictions for optimum damping which were experimentally verified on a large aperture segmented system.     

对解线频调ISAR的间歇采样转发干扰

针对间歇采样转发应用于宽带ISAR干扰问题,研究了间歇采样转发信号经解线频调ISAR二维成像处理后信号特性,通过推导干扰信号对应的二维输出形式,讨论了干扰图像变化情况并由此分析了间歇采样周期和占空比对干扰效果的影响。利用数字仿真验证了干扰输出形式及图像特征理论分析的正确性;将实测数据与间歇采样转发处理相结合,初步验证了间歇采样转发干扰能够形成二维ISAR假目标。