面向对象开发方法的单元测试研究

简要介绍了面向对象开发方法的单元测试面临的特殊性问题并进行分析，探讨了面向对象单元测试采取的策略和测试用例的设计方法，最后对面向对象单元测试的充分性问题进行了讨论。     

先进战斗机气动弹性设计综述

中国新一代战斗机的研发引领了飞机设计领域各项技术的创新和发展。针对研制总要求和任务特殊性，中国航空工业成都飞机设计研究所气动弹性专业建立了精益气动弹性设计与验证技术体系。基于多学科优化设计流程，开展了旨在提高飞机气动弹性品质的关键技术攻关、气弹优化设计和分析工作。完成了考虑含全动翼面结构非线性的全机动力学特性地面试验、亚跨超声速颤振模型风洞试验和气动弹性飞行试验验证。在较短的研发周期内，成功实现气动弹性设计目标，为新一代战斗机的成功研制提供了技术保障。描述了该飞机气动弹性设计历程、主要技术工作以及在此基础上取得的技术进步、能力提升以及具有研究所特色的气动弹性设计知识工程建设。     

苏联复合材料结构无损检测方法和仪器设备述评

对苏联复合材料结构无损检测方法、仪器设备、技术特长和发展方向做了简要述评,并对其采用的典型仪器设备系统技术参数给以简要介绍。最后联系我国固体火箭发动机无损检测工作实际提出了两点建议。     

小卫星非常规动力学分析与控制

针对小卫星研制中出现的一些非常规动力学问题进行研究,并提出解决办法。针对小卫星组件最大冲击谱量级超出常规冲击试验规范谱的分析与验证困难,通过研究提出了能够分析评估组件高量级冲击的方法。针对小卫星随机振动下强度设计方法还存在较大误差,分析了系统模态质量比与模态频率在一定频段的影响规律,认为忽略模态质量耦合会带来误差,提出了考虑模态质量耦合的准静态载荷计算方法。最后,针对小卫星整星开展了减振研究,分析了正弦和随机减振效果,对于对称安装减振系统,提出了减振系统的主频率计算公式。     

Modelling ignition probability with pairwise mixing-reaction model for flame particle tracking

Reduced order models for ignition analysis can offer insights into ignition processes and facilitate the combustor optimization. In this study, a Pairwise Mixing-Reaction (PMR) model is formulated to model the interaction between the flame particle and the surrounding cell mixture during Lagrangian flame particle tracking. Specifically, the model accounts for the two-way coupling of mass and energy between the flame particle and the surrounding shell layer by modelling the corresponding turbulent mixing, chemical reaction and evaporation process if present. The state of a flame particle, e.g., burnt, hot gas or extinguished, is determined based on particle temperature. This model can properly describe the ignition process with a spark kernel being initiated in a nonflammable region, which is of practical importance in certain turbine engines and has not been rigorously accounted for by the existing models based on the estimation of local Karlovitz number. The model is integrated into an ignition probability analysis platform and is demonstrated for a methane/air bluff-body flame with the flow and fuel/air mixing characteristics being extracted from a non-reacting simulation. The results show that for the spark location being at the extreme fuel-lean outer shear layer of the recirculation zone, PMR can yield ignition events with a significant number of active flame particles. The mechanisms for the survival of the initial flame particles and the entrainment of the survived flame particles into the recirculation zone are analyzed. The results also show that the ignition probability map from PMR agrees well with the experimental observation: a high ignition probability in the shear layer of the recirculation zone near the mean stoichiometric surface, and low ignition probabilities inside the recirculation zone and the top stagnation region of the recirculation zone. The parametric study shows that the predicted shape of the ignition progress factor and ignition probability is in general insensitive to the model parameters and the model is adequate for quantifying the regions with high ignition probabilities.     

Which way is the bookstore? A closer look at the judgments of relative directions task

We present a detailed analysis of a widely used assay in human spatial cognition, the judgments of relative direction (JRD) task. We conducted three experiments involving virtual navigation interspersed with the JRD task, and included confidence judgments and map drawing as additional metrics. We also present a technique for assessing the similarity of the cognitive representations underlying performance on the JRD and map-drawing tasks. Our results support the construct validity of the JRD task and its connection to allocentric representation. Additionally, we found that chance performance on the JRD task depends on the distribution of the angles of participants’ responses, rather than being constant and 90 degrees. Accordingly, we present a method for better determining chance performance.     

大型客机低速构型高雷诺数风洞腹撑支架干扰数值模拟

风洞到飞行相关性修正是获取现代大型客机低速气动特性的重要手段，通常采用增压提高风洞试验雷诺数，而支架干扰修正是该修正体系的一个关键环节。采用数值模拟研究了增压风洞腹撑的支架干扰，并分析了腹撑对飞机各部件的干扰及其对风洞流场的影响。通过数值模拟与风洞试验对比，表明升力系数相差0.006，阻力系数最大相差0.001 2，俯仰力矩系数最大相差0.01，验证了CFD数值模拟方法的可靠性。CFD计算结果表明：腹撑使得全机升力增加、阻力减小，俯仰力矩增加；腹撑对升力影响的主要部件是机翼，腹撑使得风洞中心以上动压增加，提升上翼面流速，从而增加了机翼的升力；与传统认识不同的是腹撑对阻力影响为负，且主要影响部件为缝翼，原因为缝翼下偏使得法矢分量向前从而减小了阻力；腹撑对俯仰力矩影响的主要部件是机身及平尾。研究结果揭示了腹撑对飞机气动特性影响的量级、主要影响部件及其流场变化，可为支架干扰数据修正及支架优化设计提供参考。所得结论可更好用于支架干扰试验的开展及风洞到飞行数据的修正，具有一定的工程实用性。     

One-dimensional numerical investigation on multi-cylinder gasoline engine fueled by micro-emulsions,CNG, and hydrogen in dual fuel mode

This research work is the novel state-of-the-art technology performed on multi-cylinder SI engine fueled compressed natural gas, emulsified fuel, and hydrogen as dual fuel. This work predicts the overall features of performance, combustion, and exhaust emissions of individual fuels based on AVL Boost simulation technology. Three types of alternative fuels have been compared and analyzed. The results show that hydrogen produces 20% more brake power than CNG and 25% more power than micro-emulsion fuel at 1500 r/min, which further increases the brake power of hydrogen, CNG, and micro-emulsions in the range of 25%, 20%, and 15% at higher engine speeds of 2500–4000 r/min, respectively. In addition, the brake-specific fuel consumption is the lowest for 100% hydrogen, followed by CNG 100% and then micro-emulsions at 1500 r/min. At 2500–5000 r/min, there is a significant drop in brake-specific fuel consumption due to a lean mixture at higher engine speeds. The CO, HC, and NO_x emissions significantly improve for hydrogen, CNG, and micro-emulsion fuel. Hydrogen fuel shows zero CO and HC emissions and is the main objective of this research to produce 0% carbon-based emissions with a slight increase in NO_x emissions, and CNG shows 30% lower CO emissions than micro-emulsions and 21.5% less hydrocarbon emissions than micro-emulsion fuel at stoichiometric air/fuel ratio.     

民用飞机全机静力试验前机身工况配平载荷设计

民用飞机全机静力试验中由于加载方案复杂,为了简化试验加载数量,传统的配平方案主要保证考核区的加载准确性,对于非考核区的载荷简化到若干加载点上。对于飞机机身这种薄壁结构,非考核区的配平对考核区影响较大。以某飞机前机身严重工况为例,基于飞机全机有限元模型,研究静力试验的载荷配平方案;通过对比分析态载荷与传统试验态配平载荷方案下的内力解,对传统全机静力试验载荷配平方案进行优化。结果表明：优化后的试验态内力解与分析态内力解基本吻合;对于飞机机身薄壁结构,圣维南原理并不适用,全机静力试验的载荷配平要与真实工况受力情况吻合,才能达到试验验证目的。     

Conceptual design and flight test of two wingtip-docked multi-body aircraft

To overcome the drawbacks such as large wing deformations, poor performance encountering gusts, limits in taking off and landing, inconvenience of transportation of High-Altitude Long-Endurance (HALE) Unmanned Aerial Vehicles (UAVs), a new conceptual aircraft called wingtip-docked Multi-Body Aircraft (MBA) has attracted lots of attentions. Aiming to investigate the feasibility of this concept, two UAV models were designed, manufactured and connected by a wingtip-docking mechanism, which only allows the relative roll motion between the two aircraft. The trim solution of the two connected aircraft is firstly obtained by solving the developed nonlinear flight dynamic equations, followed by the stability analysis based on the linearized model. The results show that the connected aircraft is inherently unstable and cannot fly without a reasonable flight control system. A set of Proportional-Integral-Derivative (PID) control laws was then developed and implemented in the two experimental aircraft. The success of the flight tests show that the flight control can effectively eliminate the unstable motion and the wingtip-docked MBA is controllable and feasible.