Fuel mass penalty due to generators and fuel cells as energy source of the all-electric aircraft

The paper presents the results of an assessment of the fuel mass penalty due to generators and fuel cell systems. Based on the simulation tool SysFuel, fuel mass penalties for different mission ranges and fuel cell architectures are calculated and compared to a conventional reference architecture. Different fuel cell architectures using ram air or cabin exhaust air and different options of energy recovery are considered. As a result of the studies, target values are presented for the mass to power ratio of fuel cell systems to achieve fuel mass reductions compared to conventional generator and auxiliary power unit systems.     

实现Developer/2000环境下动态生成报表功能

通常数据库应用系统中的输出报表必须在系统开发阶段定制,不能满足用户不断变化的管理需求.介绍了用Oracle开发工具Developer/2000结合DDE(Dynamic Data Exchange)技术实现任选查询和动态生成报表的方法,这种方法允许用户根据自己的要求选择输出报表的内容和格式,并利用Excel进行编辑,极大地增强了系统的报表生成能力和灵活性,具有很好的实用性.      

基于卫星图像数据的服务器负载策略

文章介绍了卫星数据图像的存储,论述几种集群服务器的负载策略,提出一种自适应的负载均衡策略,并对以往策略进行了对比。对分布式分包路由(DPR)技术作了深入的分析,作者在测试评估的过程中,给出一种新的集群服务器方案。     

基于Web的飞机维修管理信息系统

结合某部附件维修厂的飞机维修过程,采用B/S模式,以Bea公司的Weblogic作为Web服务器,Oracle8作为后台数据库管理信息系统,架构了基于Web的飞机维修管理信息系统,同时叙述了系统实施的硬件和软件方案。     

我国早期原子钟研制历程回顾

“2019全国时间频率学术会议”是由四个专业委员会联合每两年举办一次的20周年纪念会。20年来，我国原子钟事业已有长足发展，成为世界上原子钟研制与开发的大国。但总体上说，我们的工作还是以跟随为主，真正属于自主创新的较少。不改变这种局面，我们还难以成为独立自主的时间频率强国，为国家经济和国防建设作出应有贡献。本文回顾了我国原子钟研发的情况，提到一些从基础研究上属于原始创新的案例。阐述了这些案例是在简陋的实验条件下依靠对原子钟内各类实验现象进行深入的物理分析基础上出现的。同时，也指出了在比较粗糙的工艺条件下实现精细的技术指标中能工巧匠所起的特殊作用。文章也约略提到国内各单位间无私协作的崇高精神。本文将讲述一些故事，并就原子钟产业的问题表示一点看法。中国要实现“强国梦”，阻力和困难还很多很艰巨，我们必须拥有丰富的原始创新来加以克服。为此，坚韧的奋斗钻研精神和传统仍不失借鉴与继承意义。     

Influence of uniaxial tensile pre-strain on forming limit curve by using biaxial tensile test

This paper focused on the effect of pre-strain on forming limit curves (FLC) of 5754-O aluminum alloy sheet through utilizing biaxial tensile approach. Based on Swift model and Yld2000-2d yield criterion, the dimensions of cruciform specimen was optimized through applying finite element method for increasing the strain at specimen center. After that, with the recommended specimen size, the cruciform specimen was tested under various stroke ratios to experimentally characterize the limit strains under different pre-strain levels. Subsequently, the biaxial tensile tests were simulated by Abaqus to obtain the limit strains and validate the material models. It can be observed in both experiments and simulations that the pre-strained uniaxial tension followed by plane tension or equi-biaxial tension can improve the formability of sheet metals. Besides, the strain path change affects the trend of first derivative of strain rate difference between neighboring points with respect to time. An early increase occurred and then fell back to the stable value, the steady evolution continued until to a new increase reaching the critical value. The M–K prediction approach was simulated to verify the influence of pre-strain on FLC. It can be found that the early increase peaks of the major strain incremental ratio rose with the amplitude of pre-strain. Finally, the phenomenon of pseudolocalization caused by the strain path change was explained through evolution of stress state inside the groove.     

数字化焊接车间的结构和功能设计

数字化焊接车间将是未来几年焊接工厂建设的发展方向,在保证产品质量稳定性、生产管理高效性、生产故障的可追溯性等方面展现出重要的作用。结合艾美特公司多年数字化焊接系统的设计与制造经验,以及为多个大客户提供数字化车间建设服务的经历,阐述数字化焊接车间在现代生产加工中的重要作用,并分享艾美特公司数字化焊接车间的技术基础和结构模型。     

基于修正面元法的机翼焦点位置变化研究

针对静气动弹性问题中机翼焦点位置求解精度与效率的矛盾,提出采用分段斜率修正面元法来计算气动力,该方法以刚体机翼在不同迎角下的CFD数据作为修正基础,对弹性变形后的机翼下洗采用分段修正,克服了传统面元法无法考虑非线性因素的缺点。通过M6机翼气动焦点位置的计算表明:相对于CFD方法,该方法保持了较高的准确度并且计算效率较高;相对于传统面元法,该方法能够准确地计算焦点位置和弹性机翼焦点位置变化量,适用于工程设计。     

大型民用客机管制与监视系统验证及测试平台的构建

研发大型民用客机航路管制与监视系统验证及测试平台,从而实现机地数据通信系统环境下的航路管制与监视信息的数据地面接收和处理;同时,依照现有的空管航路管制与监视功能的国际标准和相关区域的运行要求,实现地面管制系统向机载系统的数据发布。该项研究成果能对口飞机机载数据链相关的ATC(Air Traffic Control,空中交通管制)功能和部分监视功能ADS-C(Automatic Dependent Surveillance-Contract,合同式自动相关监视)、ADS-B(Automatic Dependent Surveillance-Broadcast,广播式自动相关监视),提供对应的地面收发端,监控机载系统数据状态。